new file mode 100644
@@ -0,0 +1,32 @@
+Include configuration snippets from subdirectory.
+
+NOTE: first configuration option wins.
+
+Upstream-Status: Inappropriate
+
+Index: openssh-9.5p1/ssh_config
+===================================================================
+--- openssh-9.5p1.orig/ssh_config
++++ openssh-9.5p1/ssh_config
+@@ -5,6 +5,8 @@
+ # users, and the values can be changed in per-user configuration files
+ # or on the command line.
+
++Include /etc/ssh/ssh_config.d/*.conf
++
+ # Configuration data is parsed as follows:
+ # 1. command line options
+ # 2. user-specific file
+Index: openssh-9.5p1/sshd_config
+===================================================================
+--- openssh-9.5p1.orig/sshd_config
++++ openssh-9.5p1/sshd_config
+@@ -10,6 +10,8 @@
+ # possible, but leave them commented. Uncommented options override the
+ # default value.
+
++Include /etc/ssh/sshd_config.d/*.conf
++
+ #Port 22
+ #AddressFamily any
+ #ListenAddress 0.0.0.0
deleted file mode 100644
@@ -1,48 +0,0 @@
-# $OpenBSD: ssh_config,v 1.35 2020/07/17 03:43:42 dtucker Exp $
-
-# This is the ssh client system-wide configuration file. See
-# ssh_config(5) for more information. This file provides defaults for
-# users, and the values can be changed in per-user configuration files
-# or on the command line.
-
-# Configuration data is parsed as follows:
-# 1. command line options
-# 2. user-specific file
-# 3. system-wide file
-# Any configuration value is only changed the first time it is set.
-# Thus, host-specific definitions should be at the beginning of the
-# configuration file, and defaults at the end.
-
-# Site-wide defaults for some commonly used options. For a comprehensive
-# list of available options, their meanings and defaults, please see the
-# ssh_config(5) man page.
-
-Include /etc/ssh/ssh_config.d/*.conf
-
-# Host *
-# ForwardAgent no
-# ForwardX11 no
-# PasswordAuthentication yes
-# HostbasedAuthentication no
-# GSSAPIAuthentication no
-# GSSAPIDelegateCredentials no
-# BatchMode no
-# CheckHostIP yes
-# AddressFamily any
-# ConnectTimeout 0
-# StrictHostKeyChecking ask
-# IdentityFile ~/.ssh/id_rsa
-# IdentityFile ~/.ssh/id_dsa
-# IdentityFile ~/.ssh/id_ecdsa
-# IdentityFile ~/.ssh/id_ed25519
-# Port 22
-# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc
-# MACs hmac-md5,hmac-sha1,umac-64@openssh.com
-# EscapeChar ~
-# Tunnel no
-# TunnelDevice any:any
-# PermitLocalCommand no
-# VisualHostKey no
-# ProxyCommand ssh -q -W %h:%p gateway.example.com
-# RekeyLimit 1G 1h
-# UserKnownHostsFile ~/.ssh/known_hosts.d/%k
deleted file mode 100644
@@ -1,119 +0,0 @@
-# $OpenBSD: sshd_config,v 1.104 2021/07/02 05:11:21 dtucker Exp $
-
-# This is the sshd server system-wide configuration file. See
-# sshd_config(5) for more information.
-
-# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
-
-# The strategy used for options in the default sshd_config shipped with
-# OpenSSH is to specify options with their default value where
-# possible, but leave them commented. Uncommented options override the
-# default value.
-
-Include /etc/ssh/sshd_config.d/*.conf
-
-#Port 22
-#AddressFamily any
-#ListenAddress 0.0.0.0
-#ListenAddress ::
-
-#HostKey /etc/ssh/ssh_host_rsa_key
-#HostKey /etc/ssh/ssh_host_ecdsa_key
-#HostKey /etc/ssh/ssh_host_ed25519_key
-
-# Ciphers and keying
-#RekeyLimit default none
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2m
-#PermitRootLogin prohibit-password
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-#PubkeyAuthentication yes
-
-# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
-# but this is overridden so installations will only check .ssh/authorized_keys
-AuthorizedKeysFile .ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-#IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-#PasswordAuthentication yes
-#PermitEmptyPasswords no
-
-# Change to yes to enable keyboard-interactive authentication (beware issues
-# with some PAM modules and threads)
-KbdInteractiveAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the KbdInteractiveAuthentication and
-# PasswordAuthentication. Depending on your PAM configuration,
-# PAM authentication via KbdInteractiveAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and KbdInteractiveAuthentication to 'no'.
-#UsePAM no
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-#X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-#PrintMotd yes
-#PrintLastLog yes
-#TCPKeepAlive yes
-#PermitUserEnvironment no
-Compression no
-ClientAliveInterval 15
-ClientAliveCountMax 4
-#UseDNS no
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# override default of no subsystems
-Subsystem sftp /usr/libexec/sftp-server
-
-# Example of overriding settings on a per-user basis
-#Match User anoncvs
-# X11Forwarding no
-# AllowTcpForwarding no
-# PermitTTY no
-# ForceCommand cvs server
@@ -12,8 +12,6 @@ DEPENDS = "zlib openssl virtual/crypt"
DEPENDS += "${@bb.utils.contains('DISTRO_FEATURES', 'pam', 'libpam', '', d)}"
SRC_URI = "http://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-${PV}.tar.gz \
- file://sshd_config \
- file://ssh_config \
file://init \
${@bb.utils.contains('DISTRO_FEATURES', 'pam', '${PAM_SRC_URI}', '', d)} \
file://sshd.service \
@@ -23,6 +21,7 @@ SRC_URI = "http://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-${PV}.tar
file://volatiles.99_sshd \
file://run-ptest \
file://fix-potential-signed-overflow-in-pointer-arithmatic.patch \
+ file://include-conf.patch \
file://sshd_check_keys \
file://add-test-support-for-busybox.patch \
file://0001-regress-banner.sh-log-input-and-output-files-on-erro.patch \
@@ -101,8 +100,6 @@ CACHED_CONFIGUREVARS += "ac_cv_header_maillock_h=no"
do_configure:prepend () {
export LD="${CC}"
- install -m 0644 ${WORKDIR}/sshd_config ${B}/
- install -m 0644 ${WORKDIR}/ssh_config ${B}/
}
do_compile_ptest() {