Message ID | 20230908203004.2764200-1-c-shilwant@ti.com |
---|---|
State | Superseded |
Delegated to: | Ryan Eatmon |
Headers | show |
Series | [meta-ti,master/kirkstone,1/2] recipes-bsp: u-boot: Add u-boot-mergeconfig.inc to handle fragment u-boot config | expand |
Sorry for replying late. I have some comments and few concerns about these patches - please give me a day to get back with more details. Thanks.
On Sat, Sep 09, 2023 at 02:00:04AM +0530, Chirag Shilwant wrote: > - Add a new file u-boot-mergeconfig.inc which will ensure we handle fragment u-boot configs > using a new variable UBOOT_CONFIG_FRAGMENT which stores the name of fragment u-boot config > to be used. Would be nice to provide extra details here in the commit message about config fragment support in U-boot and its recipe. E.g.: * U-boot recipe in OE-Core supports out-of-tree config fragments that are passed via SRC_URI and automatically merges all *.cfg files as fragments. This makes specifying config fragments in the machine configuration a bit difficult. * U-boot itself supports in-tree config fragments and recently been adding fragments with *.config extension (first in configs/ dir, but will be moving to the corresponding board/ dir), so adding a way to specify and pass those. > - Include u-boot-mergeconfig.inc in u-boot-ti.inc > > Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> > --- > meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc | 7 +++++++ > meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc | 1 + > 2 files changed, 8 insertions(+) > create mode 100644 meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc > > diff --git a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc > new file mode 100644 > index 00000000..69db6260 > --- /dev/null > +++ b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc > @@ -0,0 +1,7 @@ > +do_compile:prepend () { Should be done in do_configure instead. Tasks should be self-contained and granular. Plus, do_compile can be repeated w/o do_configure. If you are re-configuring every time and generate a new .config file in do_compile, that would probably trigger full re-compile due to make tracking file timestamps... > + if [ -n "${UBOOT_CONFIG_FRAGMENT}" ] Multiple fragments are supported, so maybe call it UBOOT_CONFIG_FRAGMENTS plural? > + then > + oe_runmake -C ${S} O=${B} ${UBOOT_MACHINE} ${UBOOT_CONFIG_FRAGMENT} > + oe_runmake -C ${S} O=${B} olddefconfig > + fi So, this basically repeats configuration done in u-boot-configure.inc in OE-Core. But it also ignores UBOOT_CONFIG support for multiple (def-)configs. While I realize you just want to address a single use-case, making it a bit future-proof shouldn't be overlooked. Think of supporting both UBOOT_CONFIG and UBOOT_CONFIG_FRAGMENTS at the same time. Probably completely rewriting do_configure from u-boot-configure.inc would be needed... BTW, UBOOT_CONFIG naming is unfortunate - it has nothing to do with config fragments. While UBOOT_MACHINE specifies a single defconfig, UBOOT_CONFIG takes a list of defconfigs and iterates through them building each separately. > +} > diff --git a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc > index f3285c23..5292517b 100644 > --- a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc > +++ b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc > @@ -7,6 +7,7 @@ SPL_BINARY ?= "MLO" > > require ${COREBASE}/meta/recipes-bsp/u-boot/u-boot-common.inc > require ${COREBASE}/meta/recipes-bsp/u-boot/u-boot.inc > +require u-boot-mergeconfig.inc > > FILESEXTRAPATHS:prepend := "${THISDIR}/u-boot:" > > -- > 2.34.1
On Tue, Sep 12, 2023 at 04:04:03PM -0400, Denys Dmytriyenko wrote: > On Sat, Sep 09, 2023 at 02:00:04AM +0530, Chirag Shilwant wrote: > > - Add a new file u-boot-mergeconfig.inc which will ensure we handle fragment u-boot configs > > using a new variable UBOOT_CONFIG_FRAGMENT which stores the name of fragment u-boot config > > to be used. > > Would be nice to provide extra details here in the commit message about config > fragment support in U-boot and its recipe. E.g.: > > * U-boot recipe in OE-Core supports out-of-tree config fragments that are > passed via SRC_URI and automatically merges all *.cfg files as fragments. > This makes specifying config fragments in the machine configuration a bit > difficult. > > * U-boot itself supports in-tree config fragments and recently been adding > fragments with *.config extension (first in configs/ dir, but will be moving > to the corresponding board/ dir), so adding a way to specify and pass those. > > > > - Include u-boot-mergeconfig.inc in u-boot-ti.inc > > > > Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> > > --- > > meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc | 7 +++++++ > > meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc | 1 + > > 2 files changed, 8 insertions(+) > > create mode 100644 meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc > > > > diff --git a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc > > new file mode 100644 > > index 00000000..69db6260 > > --- /dev/null > > +++ b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc > > @@ -0,0 +1,7 @@ > > +do_compile:prepend () { > > Should be done in do_configure instead. Tasks should be self-contained and > granular. Plus, do_compile can be repeated w/o do_configure. If you are > re-configuring every time and generate a new .config file in do_compile, > that would probably trigger full re-compile due to make tracking file > timestamps... > > > > + if [ -n "${UBOOT_CONFIG_FRAGMENT}" ] > > Multiple fragments are supported, so maybe call it UBOOT_CONFIG_FRAGMENTS > plural? > > > > + then > > + oe_runmake -C ${S} O=${B} ${UBOOT_MACHINE} ${UBOOT_CONFIG_FRAGMENT} > > + oe_runmake -C ${S} O=${B} olddefconfig > > + fi > > So, this basically repeats configuration done in u-boot-configure.inc in > OE-Core. But it also ignores UBOOT_CONFIG support for multiple (def-)configs. > While I realize you just want to address a single use-case, making it a bit > future-proof shouldn't be overlooked. > > Think of supporting both UBOOT_CONFIG and UBOOT_CONFIG_FRAGMENTS at the same > time. Probably completely rewriting do_configure from u-boot-configure.inc > would be needed... > > BTW, UBOOT_CONFIG naming is unfortunate - it has nothing to do with config > fragments. While UBOOT_MACHINE specifies a single defconfig, UBOOT_CONFIG > takes a list of defconfigs and iterates through them building each separately. Ah, forget another use-case. So, besides combining UBOOT_CONFIG_FRAGMENTS with UBOOT_CONFIG, what about mixing in-tree and out-of-tree fragments? :) I know the matrix of possible options is getting quite complex, that's why we have a separate setup-defconfig.inc for the kernel in meta-ti to cover all the bases. > > +} > > diff --git a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc > > index f3285c23..5292517b 100644 > > --- a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc > > +++ b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc > > @@ -7,6 +7,7 @@ SPL_BINARY ?= "MLO" > > > > require ${COREBASE}/meta/recipes-bsp/u-boot/u-boot-common.inc > > require ${COREBASE}/meta/recipes-bsp/u-boot/u-boot.inc > > +require u-boot-mergeconfig.inc > > > > FILESEXTRAPATHS:prepend := "${THISDIR}/u-boot:" > > > > -- > > 2.34.1
On 13/09/23 01:34, Denys Dmytriyenko wrote: > On Sat, Sep 09, 2023 at 02:00:04AM +0530, Chirag Shilwant wrote: >> - Add a new file u-boot-mergeconfig.inc which will ensure we handle fragment u-boot configs >> using a new variable UBOOT_CONFIG_FRAGMENT which stores the name of fragment u-boot config >> to be used. > Would be nice to provide extra details here in the commit message about config > fragment support in U-boot and its recipe. E.g.: > > * U-boot recipe in OE-Core supports out-of-tree config fragments that are > passed via SRC_URI and automatically merges all *.cfg files as fragments. > This makes specifying config fragments in the machine configuration a bit > difficult. > > * U-boot itself supports in-tree config fragments and recently been adding > fragments with *.config extension (first in configs/ dir, but will be moving > to the corresponding board/ dir), so adding a way to specify and pass those. Sure, will update the commit message & provide extra details in my v2 PATCH. > >> - Include u-boot-mergeconfig.inc in u-boot-ti.inc >> >> Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> >> --- >> meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc | 7 +++++++ >> meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc | 1 + >> 2 files changed, 8 insertions(+) >> create mode 100644 meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc >> >> diff --git a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc >> new file mode 100644 >> index 00000000..69db6260 >> --- /dev/null >> +++ b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc >> @@ -0,0 +1,7 @@ >> +do_compile:prepend () { > Should be done in do_configure instead. Tasks should be self-contained and > granular. Plus, do_compile can be repeated w/o do_configure. If you are > re-configuring every time and generate a new .config file in do_compile, > that would probably trigger full re-compile due to make tracking file > timestamps... > Yes, we can update this to happen in do_configure. I believe do_configure:append should be good & will work. Will handle this in v2. >> + if [ -n "${UBOOT_CONFIG_FRAGMENT}" ] > Multiple fragments are supported, so maybe call it UBOOT_CONFIG_FRAGMENTS > plural? > > >> + then >> + oe_runmake -C ${S} O=${B} ${UBOOT_MACHINE} ${UBOOT_CONFIG_FRAGMENT} >> + oe_runmake -C ${S} O=${B} olddefconfig >> + fi > So, this basically repeats configuration done in u-boot-configure.inc in > OE-Core. But it also ignores UBOOT_CONFIG support for multiple (def-)configs. > While I realize you just want to address a single use-case, making it a bit > future-proof shouldn't be overlooked. > > Think of supporting both UBOOT_CONFIG and UBOOT_CONFIG_FRAGMENTS at the same > time. Probably completely rewriting do_configure from u-boot-configure.inc > would be needed... > > BTW, UBOOT_CONFIG naming is unfortunate - it has nothing to do with config > fragments. While UBOOT_MACHINE specifies a single defconfig, UBOOT_CONFIG > takes a list of defconfigs and iterates through them building each separately. > Thanks for your suggestions. I appreciate your idea to cover all use cases with u-boot-mergeconfig.inc, but I have few concerns due to the current release situation we are into. As far as I know, meta-ti does not have a use case for UBOOT_CONFIG itself. We are using UBOOT_MACHINE for handling the base defconfig, which works well for our needs. The concept of having u-boot fragments was introduced recently in ti-u-boot after we got a feedback from upstream uboot as around 90% of configs were same between am62xx-evm & am62xxsip-evm. This was a valid input and hence we considered in ti-u-boot. In order to support that I had to find a quick way to handle this in Yocto it with UBOOT_MACHINE along with UBOOT_CONFIG_FRAGMENT logic, which I had also discussed with you on the syncup call. Considering that the am62xxsip-evm release is only two weeks away, can we consider the fragments approach for now and avoid any potential risks or delays. I will work with you in coming weeks to make this better by handling all the cases of uboot-config and fragments. Please let me know if I you agree with my views and if I can proceed with fixing the other issues you highlighted, they are trivial I can submit a patch tomorrow. >> +} >> diff --git a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc >> index f3285c23..5292517b 100644 >> --- a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc >> +++ b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc >> @@ -7,6 +7,7 @@ SPL_BINARY ?= "MLO" >> >> require ${COREBASE}/meta/recipes-bsp/u-boot/u-boot-common.inc >> require ${COREBASE}/meta/recipes-bsp/u-boot/u-boot.inc >> +require u-boot-mergeconfig.inc >> >> FILESEXTRAPATHS:prepend := "${THISDIR}/u-boot:" >> >> -- >> 2.34.1
On Wed, Sep 13, 2023 at 10:12:57PM +0530, Chirag Shilwant via lists.yoctoproject.org wrote: > On 13/09/23 01:34, Denys Dmytriyenko wrote: > >On Sat, Sep 09, 2023 at 02:00:04AM +0530, Chirag Shilwant wrote: > >>- Add a new file u-boot-mergeconfig.inc which will ensure we handle fragment u-boot configs > >>using a new variable UBOOT_CONFIG_FRAGMENT which stores the name of fragment u-boot config > >>to be used. > >Would be nice to provide extra details here in the commit message about config > >fragment support in U-boot and its recipe. E.g.: > > > >* U-boot recipe in OE-Core supports out-of-tree config fragments that are > >passed via SRC_URI and automatically merges all *.cfg files as fragments. > >This makes specifying config fragments in the machine configuration a bit > >difficult. > > > >* U-boot itself supports in-tree config fragments and recently been adding > >fragments with *.config extension (first in configs/ dir, but will be moving > >to the corresponding board/ dir), so adding a way to specify and pass those. > > Sure, will update the commit message & provide extra details in my > v2 PATCH. > > > > >>- Include u-boot-mergeconfig.inc in u-boot-ti.inc > >> > >>Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> > >>--- > >> meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc | 7 +++++++ > >> meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc | 1 + > >> 2 files changed, 8 insertions(+) > >> create mode 100644 meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc > >> > >>diff --git a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc > >>new file mode 100644 > >>index 00000000..69db6260 > >>--- /dev/null > >>+++ b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc > >>@@ -0,0 +1,7 @@ > >>+do_compile:prepend () { > >Should be done in do_configure instead. Tasks should be self-contained and > >granular. Plus, do_compile can be repeated w/o do_configure. If you are > >re-configuring every time and generate a new .config file in do_compile, > >that would probably trigger full re-compile due to make tracking file > >timestamps... > > > Yes, we can update this to happen in do_configure. I believe > do_configure:append should be good & will work. Will handle this in > v2. > > >>+ if [ -n "${UBOOT_CONFIG_FRAGMENT}" ] > >Multiple fragments are supported, so maybe call it UBOOT_CONFIG_FRAGMENTS > >plural? > > > > > >>+ then > >>+ oe_runmake -C ${S} O=${B} ${UBOOT_MACHINE} ${UBOOT_CONFIG_FRAGMENT} > >>+ oe_runmake -C ${S} O=${B} olddefconfig > >>+ fi > >So, this basically repeats configuration done in u-boot-configure.inc in > >OE-Core. But it also ignores UBOOT_CONFIG support for multiple (def-)configs. > >While I realize you just want to address a single use-case, making it a bit > >future-proof shouldn't be overlooked. > > > >Think of supporting both UBOOT_CONFIG and UBOOT_CONFIG_FRAGMENTS at the same > >time. Probably completely rewriting do_configure from u-boot-configure.inc > >would be needed... > > > >BTW, UBOOT_CONFIG naming is unfortunate - it has nothing to do with config > >fragments. While UBOOT_MACHINE specifies a single defconfig, UBOOT_CONFIG > >takes a list of defconfigs and iterates through them building each separately. > > > Thanks for your suggestions. I appreciate your idea to cover all use > cases with u-boot-mergeconfig.inc, but I have few concerns due to > the current release situation we are into. > > As far as I know, meta-ti does not have a use case for UBOOT_CONFIG > itself. It does: https://git.yoctoproject.org/meta-ti/tree/meta-ti-bsp/conf/machine/am335x-hs-evm.conf#n7 Which means, since your new code is added to all TI platforms, it could potentially break AM335x HS platform. > We are using UBOOT_MACHINE for handling the base defconfig, > which works well for our needs. The concept of having u-boot > fragments was introduced recently in ti-u-boot after we got a > feedback from upstream uboot as around 90% of configs were same > between am62xx-evm & am62xxsip-evm. This was a valid input and hence > we considered in ti-u-boot. In order to support that I had to find a > quick way to handle this in Yocto it with UBOOT_MACHINE along with > UBOOT_CONFIG_FRAGMENT logic, which I had also discussed with you on > the syncup call. Actually, the support was pretty much always there in U-boot, as kconfig framework along with support for fragments by calling merge_config.sh was borrowed from the kernel long ago and had been periodically synced with latest. Though U-boot didn't have own in-tree config fragments until very recently. First few got into the main config/ directory, but going forward those will reside in the corresponding board/ directories... > Considering that the am62xxsip-evm release is only two weeks away, > can we consider the fragments approach for now and avoid any > potential risks or delays. I will work with you in coming weeks to > make this better by handling all the cases of uboot-config and > fragments. Sure, this can be handled in stages. A bit more checks would be needed then to avoid breaking at least UBOOT_CONFIG use case. > Please let me know if I you agree with my views and if I can proceed > with fixing the other issues you highlighted, they are trivial I can > submit a patch tomorrow. > >>+} > >>diff --git a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc > >>index f3285c23..5292517b 100644 > >>--- a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc > >>+++ b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc > >>@@ -7,6 +7,7 @@ SPL_BINARY ?= "MLO" > >> require ${COREBASE}/meta/recipes-bsp/u-boot/u-boot-common.inc > >> require ${COREBASE}/meta/recipes-bsp/u-boot/u-boot.inc > >>+require u-boot-mergeconfig.inc > >> FILESEXTRAPATHS:prepend := "${THISDIR}/u-boot:" > >>-- > >>2.34.1
On 9/14/2023 12:08 PM, Denys Dmytriyenko wrote: > On Wed, Sep 13, 2023 at 10:12:57PM +0530, Chirag Shilwant via lists.yoctoproject.org wrote: >> On 13/09/23 01:34, Denys Dmytriyenko wrote: >>> On Sat, Sep 09, 2023 at 02:00:04AM +0530, Chirag Shilwant wrote: >>>> - Add a new file u-boot-mergeconfig.inc which will ensure we handle fragment u-boot configs >>>> using a new variable UBOOT_CONFIG_FRAGMENT which stores the name of fragment u-boot config >>>> to be used. >>> Would be nice to provide extra details here in the commit message about config >>> fragment support in U-boot and its recipe. E.g.: >>> >>> * U-boot recipe in OE-Core supports out-of-tree config fragments that are >>> passed via SRC_URI and automatically merges all *.cfg files as fragments. >>> This makes specifying config fragments in the machine configuration a bit >>> difficult. >>> >>> * U-boot itself supports in-tree config fragments and recently been adding >>> fragments with *.config extension (first in configs/ dir, but will be moving >>> to the corresponding board/ dir), so adding a way to specify and pass those. >> >> Sure, will update the commit message & provide extra details in my >> v2 PATCH. >> >>> >>>> - Include u-boot-mergeconfig.inc in u-boot-ti.inc >>>> >>>> Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> >>>> --- >>>> meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc | 7 +++++++ >>>> meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc | 1 + >>>> 2 files changed, 8 insertions(+) >>>> create mode 100644 meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc >>>> >>>> diff --git a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc >>>> new file mode 100644 >>>> index 00000000..69db6260 >>>> --- /dev/null >>>> +++ b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc >>>> @@ -0,0 +1,7 @@ >>>> +do_compile:prepend () { >>> Should be done in do_configure instead. Tasks should be self-contained and >>> granular. Plus, do_compile can be repeated w/o do_configure. If you are >>> re-configuring every time and generate a new .config file in do_compile, >>> that would probably trigger full re-compile due to make tracking file >>> timestamps... >>> >> Yes, we can update this to happen in do_configure. I believe >> do_configure:append should be good & will work. Will handle this in >> v2. >> >>>> + if [ -n "${UBOOT_CONFIG_FRAGMENT}" ] >>> Multiple fragments are supported, so maybe call it UBOOT_CONFIG_FRAGMENTS >>> plural? >>> >>> >>>> + then >>>> + oe_runmake -C ${S} O=${B} ${UBOOT_MACHINE} ${UBOOT_CONFIG_FRAGMENT} >>>> + oe_runmake -C ${S} O=${B} olddefconfig >>>> + fi >>> So, this basically repeats configuration done in u-boot-configure.inc in >>> OE-Core. But it also ignores UBOOT_CONFIG support for multiple (def-)configs. >>> While I realize you just want to address a single use-case, making it a bit >>> future-proof shouldn't be overlooked. >>> >>> Think of supporting both UBOOT_CONFIG and UBOOT_CONFIG_FRAGMENTS at the same >>> time. Probably completely rewriting do_configure from u-boot-configure.inc >>> would be needed... >>> >>> BTW, UBOOT_CONFIG naming is unfortunate - it has nothing to do with config >>> fragments. While UBOOT_MACHINE specifies a single defconfig, UBOOT_CONFIG >>> takes a list of defconfigs and iterates through them building each separately. >>> >> Thanks for your suggestions. I appreciate your idea to cover all use >> cases with u-boot-mergeconfig.inc, but I have few concerns due to >> the current release situation we are into. >> >> As far as I know, meta-ti does not have a use case for UBOOT_CONFIG >> itself. > > It does: > https://git.yoctoproject.org/meta-ti/tree/meta-ti-bsp/conf/machine/am335x-hs-evm.conf#n7 > > Which means, since your new code is added to all TI platforms, it could > potentially break AM335x HS platform. The code is wrapped behind the setting of UBOOT_CONFIG_FRAGMENT, so unless we set both UBOOT_CONFIG_FRAGMENT and UBOOT_CONFIG in am335 it should be ok. > >> We are using UBOOT_MACHINE for handling the base defconfig, >> which works well for our needs. The concept of having u-boot >> fragments was introduced recently in ti-u-boot after we got a >> feedback from upstream uboot as around 90% of configs were same >> between am62xx-evm & am62xxsip-evm. This was a valid input and hence >> we considered in ti-u-boot. In order to support that I had to find a >> quick way to handle this in Yocto it with UBOOT_MACHINE along with >> UBOOT_CONFIG_FRAGMENT logic, which I had also discussed with you on >> the syncup call. > > Actually, the support was pretty much always there in U-boot, as kconfig > framework along with support for fragments by calling merge_config.sh was > borrowed from the kernel long ago and had been periodically synced with > latest. Though U-boot didn't have own in-tree config fragments until very > recently. First few got into the main config/ directory, but going forward > those will reside in the corresponding board/ directories... > > >> Considering that the am62xxsip-evm release is only two weeks away, >> can we consider the fragments approach for now and avoid any >> potential risks or delays. I will work with you in coming weeks to >> make this better by handling all the cases of uboot-config and >> fragments. > > Sure, this can be handled in stages. A bit more checks would be needed then > to avoid breaking at least UBOOT_CONFIG use case. > > >> Please let me know if I you agree with my views and if I can proceed >> with fixing the other issues you highlighted, they are trivial I can >> submit a patch tomorrow. > > >>>> +} >>>> diff --git a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc >>>> index f3285c23..5292517b 100644 >>>> --- a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc >>>> +++ b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc >>>> @@ -7,6 +7,7 @@ SPL_BINARY ?= "MLO" >>>> require ${COREBASE}/meta/recipes-bsp/u-boot/u-boot-common.inc >>>> require ${COREBASE}/meta/recipes-bsp/u-boot/u-boot.inc >>>> +require u-boot-mergeconfig.inc >>>> FILESEXTRAPATHS:prepend := "${THISDIR}/u-boot:" >>>> -- >>>> 2.34.1
On Thu, Sep 14, 2023 at 01:23:31PM -0500, Ryan Eatmon wrote: > > > On 9/14/2023 12:08 PM, Denys Dmytriyenko wrote: > >On Wed, Sep 13, 2023 at 10:12:57PM +0530, Chirag Shilwant via lists.yoctoproject.org wrote: > >>On 13/09/23 01:34, Denys Dmytriyenko wrote: > >>>On Sat, Sep 09, 2023 at 02:00:04AM +0530, Chirag Shilwant wrote: > >>>>- Add a new file u-boot-mergeconfig.inc which will ensure we handle fragment u-boot configs > >>>>using a new variable UBOOT_CONFIG_FRAGMENT which stores the name of fragment u-boot config > >>>>to be used. > >>>Would be nice to provide extra details here in the commit message about config > >>>fragment support in U-boot and its recipe. E.g.: > >>> > >>>* U-boot recipe in OE-Core supports out-of-tree config fragments that are > >>>passed via SRC_URI and automatically merges all *.cfg files as fragments. > >>>This makes specifying config fragments in the machine configuration a bit > >>>difficult. > >>> > >>>* U-boot itself supports in-tree config fragments and recently been adding > >>>fragments with *.config extension (first in configs/ dir, but will be moving > >>>to the corresponding board/ dir), so adding a way to specify and pass those. > >> > >>Sure, will update the commit message & provide extra details in my > >>v2 PATCH. > >> > >>> > >>>>- Include u-boot-mergeconfig.inc in u-boot-ti.inc > >>>> > >>>>Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> > >>>>--- > >>>> meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc | 7 +++++++ > >>>> meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc | 1 + > >>>> 2 files changed, 8 insertions(+) > >>>> create mode 100644 meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc > >>>> > >>>>diff --git a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc > >>>>new file mode 100644 > >>>>index 00000000..69db6260 > >>>>--- /dev/null > >>>>+++ b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc > >>>>@@ -0,0 +1,7 @@ > >>>>+do_compile:prepend () { > >>>Should be done in do_configure instead. Tasks should be self-contained and > >>>granular. Plus, do_compile can be repeated w/o do_configure. If you are > >>>re-configuring every time and generate a new .config file in do_compile, > >>>that would probably trigger full re-compile due to make tracking file > >>>timestamps... > >>> > >>Yes, we can update this to happen in do_configure. I believe > >>do_configure:append should be good & will work. Will handle this in > >>v2. > >> > >>>>+ if [ -n "${UBOOT_CONFIG_FRAGMENT}" ] > >>>Multiple fragments are supported, so maybe call it UBOOT_CONFIG_FRAGMENTS > >>>plural? > >>> > >>> > >>>>+ then > >>>>+ oe_runmake -C ${S} O=${B} ${UBOOT_MACHINE} ${UBOOT_CONFIG_FRAGMENT} > >>>>+ oe_runmake -C ${S} O=${B} olddefconfig > >>>>+ fi > >>>So, this basically repeats configuration done in u-boot-configure.inc in > >>>OE-Core. But it also ignores UBOOT_CONFIG support for multiple (def-)configs. > >>>While I realize you just want to address a single use-case, making it a bit > >>>future-proof shouldn't be overlooked. > >>> > >>>Think of supporting both UBOOT_CONFIG and UBOOT_CONFIG_FRAGMENTS at the same > >>>time. Probably completely rewriting do_configure from u-boot-configure.inc > >>>would be needed... > >>> > >>>BTW, UBOOT_CONFIG naming is unfortunate - it has nothing to do with config > >>>fragments. While UBOOT_MACHINE specifies a single defconfig, UBOOT_CONFIG > >>>takes a list of defconfigs and iterates through them building each separately. > >>> > >>Thanks for your suggestions. I appreciate your idea to cover all use > >>cases with u-boot-mergeconfig.inc, but I have few concerns due to > >>the current release situation we are into. > >> > >>As far as I know, meta-ti does not have a use case for UBOOT_CONFIG > >>itself. > > > >It does: > >https://git.yoctoproject.org/meta-ti/tree/meta-ti-bsp/conf/machine/am335x-hs-evm.conf#n7 > > > >Which means, since your new code is added to all TI platforms, it could > >potentially break AM335x HS platform. > > The code is wrapped behind the setting of UBOOT_CONFIG_FRAGMENT, so > unless we set both UBOOT_CONFIG_FRAGMENT and UBOOT_CONFIG in am335 > it should be ok. Correct, that's why I phrased it as "could potentially break". Maybe not even specific to TI's AM335x HS, but to some downstream customer platform using meta-ti. As meta-ti is not the end product. > >>We are using UBOOT_MACHINE for handling the base defconfig, > >>which works well for our needs. The concept of having u-boot > >>fragments was introduced recently in ti-u-boot after we got a > >>feedback from upstream uboot as around 90% of configs were same > >>between am62xx-evm & am62xxsip-evm. This was a valid input and hence > >>we considered in ti-u-boot. In order to support that I had to find a > >>quick way to handle this in Yocto it with UBOOT_MACHINE along with > >>UBOOT_CONFIG_FRAGMENT logic, which I had also discussed with you on > >>the syncup call. > > > >Actually, the support was pretty much always there in U-boot, as kconfig > >framework along with support for fragments by calling merge_config.sh was > >borrowed from the kernel long ago and had been periodically synced with > >latest. Though U-boot didn't have own in-tree config fragments until very > >recently. First few got into the main config/ directory, but going forward > >those will reside in the corresponding board/ directories... > > > > > >>Considering that the am62xxsip-evm release is only two weeks away, > >>can we consider the fragments approach for now and avoid any > >>potential risks or delays. I will work with you in coming weeks to > >>make this better by handling all the cases of uboot-config and > >>fragments. > > > >Sure, this can be handled in stages. A bit more checks would be needed then > >to avoid breaking at least UBOOT_CONFIG use case. > > > > > >>Please let me know if I you agree with my views and if I can proceed > >>with fixing the other issues you highlighted, they are trivial I can > >>submit a patch tomorrow.
On 9/14/2023 2:42 PM, Denys Dmytriyenko wrote: > On Thu, Sep 14, 2023 at 01:23:31PM -0500, Ryan Eatmon wrote: >> >> >> On 9/14/2023 12:08 PM, Denys Dmytriyenko wrote: >>> On Wed, Sep 13, 2023 at 10:12:57PM +0530, Chirag Shilwant via lists.yoctoproject.org wrote: >>>> On 13/09/23 01:34, Denys Dmytriyenko wrote: >>>>> On Sat, Sep 09, 2023 at 02:00:04AM +0530, Chirag Shilwant wrote: >>>>>> - Add a new file u-boot-mergeconfig.inc which will ensure we handle fragment u-boot configs >>>>>> using a new variable UBOOT_CONFIG_FRAGMENT which stores the name of fragment u-boot config >>>>>> to be used. >>>>> Would be nice to provide extra details here in the commit message about config >>>>> fragment support in U-boot and its recipe. E.g.: >>>>> >>>>> * U-boot recipe in OE-Core supports out-of-tree config fragments that are >>>>> passed via SRC_URI and automatically merges all *.cfg files as fragments. >>>>> This makes specifying config fragments in the machine configuration a bit >>>>> difficult. >>>>> >>>>> * U-boot itself supports in-tree config fragments and recently been adding >>>>> fragments with *.config extension (first in configs/ dir, but will be moving >>>>> to the corresponding board/ dir), so adding a way to specify and pass those. >>>> >>>> Sure, will update the commit message & provide extra details in my >>>> v2 PATCH. >>>> >>>>> >>>>>> - Include u-boot-mergeconfig.inc in u-boot-ti.inc >>>>>> >>>>>> Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> >>>>>> --- >>>>>> meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc | 7 +++++++ >>>>>> meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc | 1 + >>>>>> 2 files changed, 8 insertions(+) >>>>>> create mode 100644 meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc >>>>>> >>>>>> diff --git a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc >>>>>> new file mode 100644 >>>>>> index 00000000..69db6260 >>>>>> --- /dev/null >>>>>> +++ b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc >>>>>> @@ -0,0 +1,7 @@ >>>>>> +do_compile:prepend () { >>>>> Should be done in do_configure instead. Tasks should be self-contained and >>>>> granular. Plus, do_compile can be repeated w/o do_configure. If you are >>>>> re-configuring every time and generate a new .config file in do_compile, >>>>> that would probably trigger full re-compile due to make tracking file >>>>> timestamps... >>>>> >>>> Yes, we can update this to happen in do_configure. I believe >>>> do_configure:append should be good & will work. Will handle this in >>>> v2. >>>> >>>>>> + if [ -n "${UBOOT_CONFIG_FRAGMENT}" ] >>>>> Multiple fragments are supported, so maybe call it UBOOT_CONFIG_FRAGMENTS >>>>> plural? >>>>> >>>>> >>>>>> + then >>>>>> + oe_runmake -C ${S} O=${B} ${UBOOT_MACHINE} ${UBOOT_CONFIG_FRAGMENT} >>>>>> + oe_runmake -C ${S} O=${B} olddefconfig >>>>>> + fi >>>>> So, this basically repeats configuration done in u-boot-configure.inc in >>>>> OE-Core. But it also ignores UBOOT_CONFIG support for multiple (def-)configs. >>>>> While I realize you just want to address a single use-case, making it a bit >>>>> future-proof shouldn't be overlooked. >>>>> >>>>> Think of supporting both UBOOT_CONFIG and UBOOT_CONFIG_FRAGMENTS at the same >>>>> time. Probably completely rewriting do_configure from u-boot-configure.inc >>>>> would be needed... >>>>> >>>>> BTW, UBOOT_CONFIG naming is unfortunate - it has nothing to do with config >>>>> fragments. While UBOOT_MACHINE specifies a single defconfig, UBOOT_CONFIG >>>>> takes a list of defconfigs and iterates through them building each separately. >>>>> >>>> Thanks for your suggestions. I appreciate your idea to cover all use >>>> cases with u-boot-mergeconfig.inc, but I have few concerns due to >>>> the current release situation we are into. >>>> >>>> As far as I know, meta-ti does not have a use case for UBOOT_CONFIG >>>> itself. >>> >>> It does: >>> https://git.yoctoproject.org/meta-ti/tree/meta-ti-bsp/conf/machine/am335x-hs-evm.conf#n7 >>> >>> Which means, since your new code is added to all TI platforms, it could >>> potentially break AM335x HS platform. >> >> The code is wrapped behind the setting of UBOOT_CONFIG_FRAGMENT, so >> unless we set both UBOOT_CONFIG_FRAGMENT and UBOOT_CONFIG in am335 >> it should be ok. > > Correct, that's why I phrased it as "could potentially break". Maybe not even > specific to TI's AM335x HS, but to some downstream customer platform using > meta-ti. As meta-ti is not the end product. Excellent point. We really do need to do this the right way and not punt this too far off into the future to do the correct implementation. > >>>> We are using UBOOT_MACHINE for handling the base defconfig, >>>> which works well for our needs. The concept of having u-boot >>>> fragments was introduced recently in ti-u-boot after we got a >>>> feedback from upstream uboot as around 90% of configs were same >>>> between am62xx-evm & am62xxsip-evm. This was a valid input and hence >>>> we considered in ti-u-boot. In order to support that I had to find a >>>> quick way to handle this in Yocto it with UBOOT_MACHINE along with >>>> UBOOT_CONFIG_FRAGMENT logic, which I had also discussed with you on >>>> the syncup call. >>> >>> Actually, the support was pretty much always there in U-boot, as kconfig >>> framework along with support for fragments by calling merge_config.sh was >>> borrowed from the kernel long ago and had been periodically synced with >>> latest. Though U-boot didn't have own in-tree config fragments until very >>> recently. First few got into the main config/ directory, but going forward >>> those will reside in the corresponding board/ directories... >>> >>> >>>> Considering that the am62xxsip-evm release is only two weeks away, >>>> can we consider the fragments approach for now and avoid any >>>> potential risks or delays. I will work with you in coming weeks to >>>> make this better by handling all the cases of uboot-config and >>>> fragments. >>> >>> Sure, this can be handled in stages. A bit more checks would be needed then >>> to avoid breaking at least UBOOT_CONFIG use case. >>> >>> >>>> Please let me know if I you agree with my views and if I can proceed >>>> with fixing the other issues you highlighted, they are trivial I can >>>> submit a patch tomorrow.
On Thu, Sep 14, 2023 at 03:46:57PM -0500, Ryan Eatmon wrote: > > > On 9/14/2023 2:42 PM, Denys Dmytriyenko wrote: > >On Thu, Sep 14, 2023 at 01:23:31PM -0500, Ryan Eatmon wrote: > >> > >> > >>On 9/14/2023 12:08 PM, Denys Dmytriyenko wrote: > >>>On Wed, Sep 13, 2023 at 10:12:57PM +0530, Chirag Shilwant via lists.yoctoproject.org wrote: > >>>>On 13/09/23 01:34, Denys Dmytriyenko wrote: > >>>>>On Sat, Sep 09, 2023 at 02:00:04AM +0530, Chirag Shilwant wrote: > >>>>>>- Add a new file u-boot-mergeconfig.inc which will ensure we handle fragment u-boot configs > >>>>>>using a new variable UBOOT_CONFIG_FRAGMENT which stores the name of fragment u-boot config > >>>>>>to be used. > >>>>>Would be nice to provide extra details here in the commit message about config > >>>>>fragment support in U-boot and its recipe. E.g.: > >>>>> > >>>>>* U-boot recipe in OE-Core supports out-of-tree config fragments that are > >>>>>passed via SRC_URI and automatically merges all *.cfg files as fragments. > >>>>>This makes specifying config fragments in the machine configuration a bit > >>>>>difficult. > >>>>> > >>>>>* U-boot itself supports in-tree config fragments and recently been adding > >>>>>fragments with *.config extension (first in configs/ dir, but will be moving > >>>>>to the corresponding board/ dir), so adding a way to specify and pass those. > >>>> > >>>>Sure, will update the commit message & provide extra details in my > >>>>v2 PATCH. > >>>> > >>>>> > >>>>>>- Include u-boot-mergeconfig.inc in u-boot-ti.inc > >>>>>> > >>>>>>Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> > >>>>>>--- > >>>>>> meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc | 7 +++++++ > >>>>>> meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc | 1 + > >>>>>> 2 files changed, 8 insertions(+) > >>>>>> create mode 100644 meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc > >>>>>> > >>>>>>diff --git a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc > >>>>>>new file mode 100644 > >>>>>>index 00000000..69db6260 > >>>>>>--- /dev/null > >>>>>>+++ b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc > >>>>>>@@ -0,0 +1,7 @@ > >>>>>>+do_compile:prepend () { > >>>>>Should be done in do_configure instead. Tasks should be self-contained and > >>>>>granular. Plus, do_compile can be repeated w/o do_configure. If you are > >>>>>re-configuring every time and generate a new .config file in do_compile, > >>>>>that would probably trigger full re-compile due to make tracking file > >>>>>timestamps... > >>>>> > >>>>Yes, we can update this to happen in do_configure. I believe > >>>>do_configure:append should be good & will work. Will handle this in > >>>>v2. > >>>> > >>>>>>+ if [ -n "${UBOOT_CONFIG_FRAGMENT}" ] > >>>>>Multiple fragments are supported, so maybe call it UBOOT_CONFIG_FRAGMENTS > >>>>>plural? > >>>>> > >>>>> > >>>>>>+ then > >>>>>>+ oe_runmake -C ${S} O=${B} ${UBOOT_MACHINE} ${UBOOT_CONFIG_FRAGMENT} > >>>>>>+ oe_runmake -C ${S} O=${B} olddefconfig > >>>>>>+ fi > >>>>>So, this basically repeats configuration done in u-boot-configure.inc in > >>>>>OE-Core. But it also ignores UBOOT_CONFIG support for multiple (def-)configs. > >>>>>While I realize you just want to address a single use-case, making it a bit > >>>>>future-proof shouldn't be overlooked. > >>>>> > >>>>>Think of supporting both UBOOT_CONFIG and UBOOT_CONFIG_FRAGMENTS at the same > >>>>>time. Probably completely rewriting do_configure from u-boot-configure.inc > >>>>>would be needed... > >>>>> > >>>>>BTW, UBOOT_CONFIG naming is unfortunate - it has nothing to do with config > >>>>>fragments. While UBOOT_MACHINE specifies a single defconfig, UBOOT_CONFIG > >>>>>takes a list of defconfigs and iterates through them building each separately. > >>>>> > >>>>Thanks for your suggestions. I appreciate your idea to cover all use > >>>>cases with u-boot-mergeconfig.inc, but I have few concerns due to > >>>>the current release situation we are into. > >>>> > >>>>As far as I know, meta-ti does not have a use case for UBOOT_CONFIG > >>>>itself. > >>> > >>>It does: > >>>https://git.yoctoproject.org/meta-ti/tree/meta-ti-bsp/conf/machine/am335x-hs-evm.conf#n7 > >>> > >>>Which means, since your new code is added to all TI platforms, it could > >>>potentially break AM335x HS platform. > >> > >>The code is wrapped behind the setting of UBOOT_CONFIG_FRAGMENT, so > >>unless we set both UBOOT_CONFIG_FRAGMENT and UBOOT_CONFIG in am335 > >>it should be ok. > > > >Correct, that's why I phrased it as "could potentially break". Maybe not even > >specific to TI's AM335x HS, but to some downstream customer platform using > >meta-ti. As meta-ti is not the end product. > > Excellent point. We really do need to do this the right way and not > punt this too far off into the future to do the correct > implementation. At least doing an extra check for UBOOT_MACHINE being set, as I mentioned in another thread, would be a good first step. > >>>>We are using UBOOT_MACHINE for handling the base defconfig, > >>>>which works well for our needs. The concept of having u-boot > >>>>fragments was introduced recently in ti-u-boot after we got a > >>>>feedback from upstream uboot as around 90% of configs were same > >>>>between am62xx-evm & am62xxsip-evm. This was a valid input and hence > >>>>we considered in ti-u-boot. In order to support that I had to find a > >>>>quick way to handle this in Yocto it with UBOOT_MACHINE along with > >>>>UBOOT_CONFIG_FRAGMENT logic, which I had also discussed with you on > >>>>the syncup call. > >>> > >>>Actually, the support was pretty much always there in U-boot, as kconfig > >>>framework along with support for fragments by calling merge_config.sh was > >>>borrowed from the kernel long ago and had been periodically synced with > >>>latest. Though U-boot didn't have own in-tree config fragments until very > >>>recently. First few got into the main config/ directory, but going forward > >>>those will reside in the corresponding board/ directories... > >>> > >>> > >>>>Considering that the am62xxsip-evm release is only two weeks away, > >>>>can we consider the fragments approach for now and avoid any > >>>>potential risks or delays. I will work with you in coming weeks to > >>>>make this better by handling all the cases of uboot-config and > >>>>fragments. > >>> > >>>Sure, this can be handled in stages. A bit more checks would be needed then > >>>to avoid breaking at least UBOOT_CONFIG use case. > >>> > >>> > >>>>Please let me know if I you agree with my views and if I can proceed > >>>>with fixing the other issues you highlighted, they are trivial I can > >>>>submit a patch tomorrow.
On 15/09/23 03:54, Denys Dmytriyenko wrote: > On Thu, Sep 14, 2023 at 03:46:57PM -0500, Ryan Eatmon wrote: >> >> On 9/14/2023 2:42 PM, Denys Dmytriyenko wrote: >>> On Thu, Sep 14, 2023 at 01:23:31PM -0500, Ryan Eatmon wrote: >>>> >>>> On 9/14/2023 12:08 PM, Denys Dmytriyenko wrote: >>>>> On Wed, Sep 13, 2023 at 10:12:57PM +0530, Chirag Shilwant via lists.yoctoproject.org wrote: >>>>>> On 13/09/23 01:34, Denys Dmytriyenko wrote: >>>>>>> On Sat, Sep 09, 2023 at 02:00:04AM +0530, Chirag Shilwant wrote: >>>>>>>> - Add a new file u-boot-mergeconfig.inc which will ensure we handle fragment u-boot configs >>>>>>>> using a new variable UBOOT_CONFIG_FRAGMENT which stores the name of fragment u-boot config >>>>>>>> to be used. >>>>>>> Would be nice to provide extra details here in the commit message about config >>>>>>> fragment support in U-boot and its recipe. E.g.: >>>>>>> >>>>>>> * U-boot recipe in OE-Core supports out-of-tree config fragments that are >>>>>>> passed via SRC_URI and automatically merges all *.cfg files as fragments. >>>>>>> This makes specifying config fragments in the machine configuration a bit >>>>>>> difficult. >>>>>>> >>>>>>> * U-boot itself supports in-tree config fragments and recently been adding >>>>>>> fragments with *.config extension (first in configs/ dir, but will be moving >>>>>>> to the corresponding board/ dir), so adding a way to specify and pass those. >>>>>> Sure, will update the commit message & provide extra details in my >>>>>> v2 PATCH. >>>>>> >>>>>>>> - Include u-boot-mergeconfig.inc in u-boot-ti.inc >>>>>>>> >>>>>>>> Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> >>>>>>>> --- >>>>>>>> meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc | 7 +++++++ >>>>>>>> meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc | 1 + >>>>>>>> 2 files changed, 8 insertions(+) >>>>>>>> create mode 100644 meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc >>>>>>>> >>>>>>>> diff --git a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc >>>>>>>> new file mode 100644 >>>>>>>> index 00000000..69db6260 >>>>>>>> --- /dev/null >>>>>>>> +++ b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc >>>>>>>> @@ -0,0 +1,7 @@ >>>>>>>> +do_compile:prepend () { >>>>>>> Should be done in do_configure instead. Tasks should be self-contained and >>>>>>> granular. Plus, do_compile can be repeated w/o do_configure. If you are >>>>>>> re-configuring every time and generate a new .config file in do_compile, >>>>>>> that would probably trigger full re-compile due to make tracking file >>>>>>> timestamps... >>>>>>> >>>>>> Yes, we can update this to happen in do_configure. I believe >>>>>> do_configure:append should be good & will work. Will handle this in >>>>>> v2. >>>>>> >>>>>>>> + if [ -n "${UBOOT_CONFIG_FRAGMENT}" ] >>>>>>> Multiple fragments are supported, so maybe call it UBOOT_CONFIG_FRAGMENTS >>>>>>> plural? >>>>>>> >>>>>>> >>>>>>>> + then >>>>>>>> + oe_runmake -C ${S} O=${B} ${UBOOT_MACHINE} ${UBOOT_CONFIG_FRAGMENT} >>>>>>>> + oe_runmake -C ${S} O=${B} olddefconfig >>>>>>>> + fi >>>>>>> So, this basically repeats configuration done in u-boot-configure.inc in >>>>>>> OE-Core. But it also ignores UBOOT_CONFIG support for multiple (def-)configs. >>>>>>> While I realize you just want to address a single use-case, making it a bit >>>>>>> future-proof shouldn't be overlooked. >>>>>>> >>>>>>> Think of supporting both UBOOT_CONFIG and UBOOT_CONFIG_FRAGMENTS at the same >>>>>>> time. Probably completely rewriting do_configure from u-boot-configure.inc >>>>>>> would be needed... >>>>>>> >>>>>>> BTW, UBOOT_CONFIG naming is unfortunate - it has nothing to do with config >>>>>>> fragments. While UBOOT_MACHINE specifies a single defconfig, UBOOT_CONFIG >>>>>>> takes a list of defconfigs and iterates through them building each separately. >>>>>>> >>>>>> Thanks for your suggestions. I appreciate your idea to cover all use >>>>>> cases with u-boot-mergeconfig.inc, but I have few concerns due to >>>>>> the current release situation we are into. >>>>>> >>>>>> As far as I know, meta-ti does not have a use case for UBOOT_CONFIG >>>>>> itself. >>>>> It does: >>>>> https://git.yoctoproject.org/meta-ti/tree/meta-ti-bsp/conf/machine/am335x-hs-evm.conf#n7 >>>>> >>>>> Which means, since your new code is added to all TI platforms, it could >>>>> potentially break AM335x HS platform. >>>> The code is wrapped behind the setting of UBOOT_CONFIG_FRAGMENT, so >>>> unless we set both UBOOT_CONFIG_FRAGMENT and UBOOT_CONFIG in am335 >>>> it should be ok. >>> Correct, that's why I phrased it as "could potentially break". Maybe not even >>> specific to TI's AM335x HS, but to some downstream customer platform using >>> meta-ti. As meta-ti is not the end product. >> Excellent point. We really do need to do this the right way and not >> punt this too far off into the future to do the correct >> implementation. > At least doing an extra check for UBOOT_MACHINE being set, as I mentioned in > another thread, would be a good first step. > Great catch! It's good to have a check for UBOOT_MACHINE being set so that it doesn't enter do_configure:append when users try to use UBOOT_CONFIG with UBOOT_CONFIG_FRAGMENT. Will incorporate this with all other feedbacks you have mentioned in another thread and send a v4 patch. >>>>>> We are using UBOOT_MACHINE for handling the base defconfig, >>>>>> which works well for our needs. The concept of having u-boot >>>>>> fragments was introduced recently in ti-u-boot after we got a >>>>>> feedback from upstream uboot as around 90% of configs were same >>>>>> between am62xx-evm & am62xxsip-evm. This was a valid input and hence >>>>>> we considered in ti-u-boot. In order to support that I had to find a >>>>>> quick way to handle this in Yocto it with UBOOT_MACHINE along with >>>>>> UBOOT_CONFIG_FRAGMENT logic, which I had also discussed with you on >>>>>> the syncup call. >>>>> Actually, the support was pretty much always there in U-boot, as kconfig >>>>> framework along with support for fragments by calling merge_config.sh was >>>>> borrowed from the kernel long ago and had been periodically synced with >>>>> latest. Though U-boot didn't have own in-tree config fragments until very >>>>> recently. First few got into the main config/ directory, but going forward >>>>> those will reside in the corresponding board/ directories... >>>>> >>>>> >>>>>> Considering that the am62xxsip-evm release is only two weeks away, >>>>>> can we consider the fragments approach for now and avoid any >>>>>> potential risks or delays. I will work with you in coming weeks to >>>>>> make this better by handling all the cases of uboot-config and >>>>>> fragments. >>>>> Sure, this can be handled in stages. A bit more checks would be needed then >>>>> to avoid breaking at least UBOOT_CONFIG use case. >>>>> >>>>> >>>>>> Please let me know if I you agree with my views and if I can proceed >>>>>> with fixing the other issues you highlighted, they are trivial I can >>>>>> submit a patch tomorrow.
diff --git a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc new file mode 100644 index 00000000..69db6260 --- /dev/null +++ b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc @@ -0,0 +1,7 @@ +do_compile:prepend () { + if [ -n "${UBOOT_CONFIG_FRAGMENT}" ] + then + oe_runmake -C ${S} O=${B} ${UBOOT_MACHINE} ${UBOOT_CONFIG_FRAGMENT} + oe_runmake -C ${S} O=${B} olddefconfig + fi +} diff --git a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc index f3285c23..5292517b 100644 --- a/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc +++ b/meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc @@ -7,6 +7,7 @@ SPL_BINARY ?= "MLO" require ${COREBASE}/meta/recipes-bsp/u-boot/u-boot-common.inc require ${COREBASE}/meta/recipes-bsp/u-boot/u-boot.inc +require u-boot-mergeconfig.inc FILESEXTRAPATHS:prepend := "${THISDIR}/u-boot:"
- Add a new file u-boot-mergeconfig.inc which will ensure we handle fragment u-boot configs using a new variable UBOOT_CONFIG_FRAGMENT which stores the name of fragment u-boot config to be used. - Include u-boot-mergeconfig.inc in u-boot-ti.inc Signed-off-by: Chirag Shilwant <c-shilwant@ti.com> --- meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc | 7 +++++++ meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc | 1 + 2 files changed, 8 insertions(+) create mode 100644 meta-ti-bsp/recipes-bsp/u-boot/u-boot-mergeconfig.inc