Message ID | 20230405185027.26235-1-afd@ti.com |
---|---|
State | Accepted |
Delegated to: | Ryan Eatmon |
Headers | show |
Series | [meta-ti,master/kirkstone] conf: machine: Set common default SERIAL_CONSOLES for all K3 | expand |
On Wed, Apr 05, 2023 at 01:50:27PM -0500, Andrew Davis via lists.yoctoproject.org wrote: > The traditional order of serial consoles for K3 has ttyS2 being the > primary UART attached console. ttyS0 is also a common choice for > distros and the TI kernel may switch at some point. To prepare > we check both UARTs on all K3 devices. Move this common check > to a K3 common location. I see different K3 platforms use ttyS0, ttyS1, ttyS2 and ttyS3. Were others just mis-used as MCU UARTs or some other leftovers? > Signed-off-by: Andrew Davis <afd@ti.com> > --- > meta-ti-bsp/conf/machine/beaglebone-ai64.conf | 3 --- > meta-ti-bsp/conf/machine/include/am62axx.inc | 3 --- > meta-ti-bsp/conf/machine/include/am62xx-lp.inc | 3 --- > meta-ti-bsp/conf/machine/include/am62xx.inc | 3 --- > meta-ti-bsp/conf/machine/include/am64xx.inc | 3 --- > meta-ti-bsp/conf/machine/include/am65xx.inc | 3 --- > meta-ti-bsp/conf/machine/include/k3.inc | 3 +++ > meta-ti-bsp/conf/machine/j7200-evm.conf | 3 --- > meta-ti-bsp/conf/machine/j721e-evm.conf | 3 --- > meta-ti-bsp/conf/machine/j721s2-evm.conf | 2 -- > meta-ti-bsp/conf/machine/j721s2-hs-evm.conf | 3 --- > meta-ti-bsp/conf/machine/j784s4-evm.conf | 2 -- > meta-ti-bsp/conf/machine/j784s4-hs-evm.conf | 2 -- > 13 files changed, 3 insertions(+), 33 deletions(-) > > diff --git a/meta-ti-bsp/conf/machine/beaglebone-ai64.conf b/meta-ti-bsp/conf/machine/beaglebone-ai64.conf > index 6e8c863c..e6cba3df 100644 > --- a/meta-ti-bsp/conf/machine/beaglebone-ai64.conf > +++ b/meta-ti-bsp/conf/machine/beaglebone-ai64.conf > @@ -4,9 +4,6 @@ > > require conf/machine/include/j721e.inc > > -SERIAL_CONSOLES = "115200;ttyS2" > -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > - > UBOOT_MACHINE = "j721e_evm_a72_config" > > PREFERRED_PROVIDER_virtual/kernel = "linux-bb.org" > diff --git a/meta-ti-bsp/conf/machine/include/am62axx.inc b/meta-ti-bsp/conf/machine/include/am62axx.inc > index d0970948..0c6b8503 100644 > --- a/meta-ti-bsp/conf/machine/include/am62axx.inc > +++ b/meta-ti-bsp/conf/machine/include/am62axx.inc > @@ -3,9 +3,6 @@ SOC_FAMILY:append = ":am62axx" > > MACHINE_FEATURES += "screen touchscreen" > > -SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS2" > -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > - > TFA_K3_SYSTEM_SUSPEND = "1" > > # Default tiboot3.bin on AM62A is for HS-FS > diff --git a/meta-ti-bsp/conf/machine/include/am62xx-lp.inc b/meta-ti-bsp/conf/machine/include/am62xx-lp.inc > index d37d4673..4601603c 100644 > --- a/meta-ti-bsp/conf/machine/include/am62xx-lp.inc > +++ b/meta-ti-bsp/conf/machine/include/am62xx-lp.inc > @@ -3,9 +3,6 @@ SOC_FAMILY:append = ":am62xx" > > MACHINE_FEATURES += "screen touchscreen" > > -SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS2" > -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > - > TFA_K3_SYSTEM_SUSPEND = "1" > > # Default tiboot3.bin on AM62x LP is for HS-FS > diff --git a/meta-ti-bsp/conf/machine/include/am62xx.inc b/meta-ti-bsp/conf/machine/include/am62xx.inc > index af6a6db4..953128cc 100644 > --- a/meta-ti-bsp/conf/machine/include/am62xx.inc > +++ b/meta-ti-bsp/conf/machine/include/am62xx.inc > @@ -3,9 +3,6 @@ SOC_FAMILY:append = ":am62xx" > > MACHINE_FEATURES += "screen gpu" > > -SERIAL_CONSOLES = "115200;ttyS2" > -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > - > PREFERRED_PROVIDER_virtual/gpudriver ?= "ti-img-rogue-driver" > > # Default tiboot3.bin on AM62x is for HS-FS > diff --git a/meta-ti-bsp/conf/machine/include/am64xx.inc b/meta-ti-bsp/conf/machine/include/am64xx.inc > index 157bf5d5..c486f3c1 100644 > --- a/meta-ti-bsp/conf/machine/include/am64xx.inc > +++ b/meta-ti-bsp/conf/machine/include/am64xx.inc > @@ -1,9 +1,6 @@ > require conf/machine/include/k3.inc > SOC_FAMILY:append = ":am64xx" > > -SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS1" > -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > - > KERNEL_DEVICETREE_PREFIX = "ti/k3-am642" > > KERNEL_DEVICETREE = " \ > diff --git a/meta-ti-bsp/conf/machine/include/am65xx.inc b/meta-ti-bsp/conf/machine/include/am65xx.inc > index 564d61b0..b848881c 100644 > --- a/meta-ti-bsp/conf/machine/include/am65xx.inc > +++ b/meta-ti-bsp/conf/machine/include/am65xx.inc > @@ -3,9 +3,6 @@ SOC_FAMILY:append = ":am65xx" > > MACHINE_FEATURES += "screen touchscreen gpu" > > -SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS1" > -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > - > PREFERRED_PROVIDER_virtual/gpudriver ?= "" > > KERNEL_DEVICETREE_PREFIX = "ti/k3-am654" > diff --git a/meta-ti-bsp/conf/machine/include/k3.inc b/meta-ti-bsp/conf/machine/include/k3.inc > index 93bcea76..5c3c771a 100644 > --- a/meta-ti-bsp/conf/machine/include/k3.inc > +++ b/meta-ti-bsp/conf/machine/include/k3.inc > @@ -53,3 +53,6 @@ MACHINE_FEATURES += "efi" > WKS_FILE ?= "sdimage-2part-efi.wks" > do_image_wic[depends] += "virtual/bootloader:do_deploy" > do_image_wic[mcdepends] += "mc::k3r5:ti-sci-fw:do_deploy" > + > +SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS2" > +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > diff --git a/meta-ti-bsp/conf/machine/j7200-evm.conf b/meta-ti-bsp/conf/machine/j7200-evm.conf > index b17b65b7..dff1da69 100644 > --- a/meta-ti-bsp/conf/machine/j7200-evm.conf > +++ b/meta-ti-bsp/conf/machine/j7200-evm.conf > @@ -4,9 +4,6 @@ > > require conf/machine/include/j7200.inc > > -SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS3" > -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > - > KERNEL_DEVICETREE_PREFIX = "ti/k3-j7200" > > KERNEL_DEVICETREE = " \ > diff --git a/meta-ti-bsp/conf/machine/j721e-evm.conf b/meta-ti-bsp/conf/machine/j721e-evm.conf > index f602a77b..8682ad60 100644 > --- a/meta-ti-bsp/conf/machine/j721e-evm.conf > +++ b/meta-ti-bsp/conf/machine/j721e-evm.conf > @@ -4,9 +4,6 @@ > > require conf/machine/include/j721e.inc > > -SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS3" > -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > - > KERNEL_DEVICETREE_PREFIX = " \ > ti/k3-j721e \ > ti/k3-j7200-mcspi-loopback \ > diff --git a/meta-ti-bsp/conf/machine/j721s2-evm.conf b/meta-ti-bsp/conf/machine/j721s2-evm.conf > index 1f54c7b1..a16e744d 100644 > --- a/meta-ti-bsp/conf/machine/j721s2-evm.conf > +++ b/meta-ti-bsp/conf/machine/j721s2-evm.conf > @@ -4,8 +4,6 @@ > > require conf/machine/include/j721s2.inc > > -SERIAL_CONSOLES = "115200;ttyS2" > -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > TFA_K3_USART = "0x8" > OPTEE_K3_USART = "0x8" > > diff --git a/meta-ti-bsp/conf/machine/j721s2-hs-evm.conf b/meta-ti-bsp/conf/machine/j721s2-hs-evm.conf > index 8fa98440..085c91e7 100644 > --- a/meta-ti-bsp/conf/machine/j721s2-hs-evm.conf > +++ b/meta-ti-bsp/conf/machine/j721s2-hs-evm.conf > @@ -4,9 +4,6 @@ > > require conf/machine/include/j721s2.inc > > -SERIAL_CONSOLES = "115200;ttyS2" > -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > - > TFA_K3_USART = "0x8" > OPTEE_K3_USART = "0x8" > > diff --git a/meta-ti-bsp/conf/machine/j784s4-evm.conf b/meta-ti-bsp/conf/machine/j784s4-evm.conf > index 53bb4e4f..c0483505 100644 > --- a/meta-ti-bsp/conf/machine/j784s4-evm.conf > +++ b/meta-ti-bsp/conf/machine/j784s4-evm.conf > @@ -4,8 +4,6 @@ > > require conf/machine/include/j784s4.inc > > -SERIAL_CONSOLES = "115200;ttyS2" > -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > TFA_K3_USART = "0x8" > OPTEE_K3_USART = "0x8" > > diff --git a/meta-ti-bsp/conf/machine/j784s4-hs-evm.conf b/meta-ti-bsp/conf/machine/j784s4-hs-evm.conf > index 1c56f55a..4deb0f8b 100644 > --- a/meta-ti-bsp/conf/machine/j784s4-hs-evm.conf > +++ b/meta-ti-bsp/conf/machine/j784s4-hs-evm.conf > @@ -4,8 +4,6 @@ > > require conf/machine/include/j784s4.inc > > -SERIAL_CONSOLES = "115200;ttyS2" > -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > TFA_K3_USART = "0x8" > OPTEEMACHINE = "k3-j784s4" > OPTEE_K3_USART = "0x8" > -- > 2.39.2
On 4/5/23 6:49 PM, Denys Dmytriyenko wrote: > On Wed, Apr 05, 2023 at 01:50:27PM -0500, Andrew Davis via lists.yoctoproject.org wrote: >> The traditional order of serial consoles for K3 has ttyS2 being the >> primary UART attached console. ttyS0 is also a common choice for >> distros and the TI kernel may switch at some point. To prepare >> we check both UARTs on all K3 devices. Move this common check >> to a K3 common location. > > I see different K3 platforms use ttyS0, ttyS1, ttyS2 and ttyS3. > > Were others just mis-used as MCU UARTs or some other leftovers? > Some look to be just misusing MCU UARTs, others types/leftovers. Hopefully this patch unifies everything. If one wants to use a different port then these two then can be chosen in DT. Andrew > >> Signed-off-by: Andrew Davis <afd@ti.com> >> --- >> meta-ti-bsp/conf/machine/beaglebone-ai64.conf | 3 --- >> meta-ti-bsp/conf/machine/include/am62axx.inc | 3 --- >> meta-ti-bsp/conf/machine/include/am62xx-lp.inc | 3 --- >> meta-ti-bsp/conf/machine/include/am62xx.inc | 3 --- >> meta-ti-bsp/conf/machine/include/am64xx.inc | 3 --- >> meta-ti-bsp/conf/machine/include/am65xx.inc | 3 --- >> meta-ti-bsp/conf/machine/include/k3.inc | 3 +++ >> meta-ti-bsp/conf/machine/j7200-evm.conf | 3 --- >> meta-ti-bsp/conf/machine/j721e-evm.conf | 3 --- >> meta-ti-bsp/conf/machine/j721s2-evm.conf | 2 -- >> meta-ti-bsp/conf/machine/j721s2-hs-evm.conf | 3 --- >> meta-ti-bsp/conf/machine/j784s4-evm.conf | 2 -- >> meta-ti-bsp/conf/machine/j784s4-hs-evm.conf | 2 -- >> 13 files changed, 3 insertions(+), 33 deletions(-) >> >> diff --git a/meta-ti-bsp/conf/machine/beaglebone-ai64.conf b/meta-ti-bsp/conf/machine/beaglebone-ai64.conf >> index 6e8c863c..e6cba3df 100644 >> --- a/meta-ti-bsp/conf/machine/beaglebone-ai64.conf >> +++ b/meta-ti-bsp/conf/machine/beaglebone-ai64.conf >> @@ -4,9 +4,6 @@ >> >> require conf/machine/include/j721e.inc >> >> -SERIAL_CONSOLES = "115200;ttyS2" >> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >> - >> UBOOT_MACHINE = "j721e_evm_a72_config" >> >> PREFERRED_PROVIDER_virtual/kernel = "linux-bb.org" >> diff --git a/meta-ti-bsp/conf/machine/include/am62axx.inc b/meta-ti-bsp/conf/machine/include/am62axx.inc >> index d0970948..0c6b8503 100644 >> --- a/meta-ti-bsp/conf/machine/include/am62axx.inc >> +++ b/meta-ti-bsp/conf/machine/include/am62axx.inc >> @@ -3,9 +3,6 @@ SOC_FAMILY:append = ":am62axx" >> >> MACHINE_FEATURES += "screen touchscreen" >> >> -SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS2" >> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >> - >> TFA_K3_SYSTEM_SUSPEND = "1" >> >> # Default tiboot3.bin on AM62A is for HS-FS >> diff --git a/meta-ti-bsp/conf/machine/include/am62xx-lp.inc b/meta-ti-bsp/conf/machine/include/am62xx-lp.inc >> index d37d4673..4601603c 100644 >> --- a/meta-ti-bsp/conf/machine/include/am62xx-lp.inc >> +++ b/meta-ti-bsp/conf/machine/include/am62xx-lp.inc >> @@ -3,9 +3,6 @@ SOC_FAMILY:append = ":am62xx" >> >> MACHINE_FEATURES += "screen touchscreen" >> >> -SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS2" >> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >> - >> TFA_K3_SYSTEM_SUSPEND = "1" >> >> # Default tiboot3.bin on AM62x LP is for HS-FS >> diff --git a/meta-ti-bsp/conf/machine/include/am62xx.inc b/meta-ti-bsp/conf/machine/include/am62xx.inc >> index af6a6db4..953128cc 100644 >> --- a/meta-ti-bsp/conf/machine/include/am62xx.inc >> +++ b/meta-ti-bsp/conf/machine/include/am62xx.inc >> @@ -3,9 +3,6 @@ SOC_FAMILY:append = ":am62xx" >> >> MACHINE_FEATURES += "screen gpu" >> >> -SERIAL_CONSOLES = "115200;ttyS2" >> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >> - >> PREFERRED_PROVIDER_virtual/gpudriver ?= "ti-img-rogue-driver" >> >> # Default tiboot3.bin on AM62x is for HS-FS >> diff --git a/meta-ti-bsp/conf/machine/include/am64xx.inc b/meta-ti-bsp/conf/machine/include/am64xx.inc >> index 157bf5d5..c486f3c1 100644 >> --- a/meta-ti-bsp/conf/machine/include/am64xx.inc >> +++ b/meta-ti-bsp/conf/machine/include/am64xx.inc >> @@ -1,9 +1,6 @@ >> require conf/machine/include/k3.inc >> SOC_FAMILY:append = ":am64xx" >> >> -SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS1" >> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >> - >> KERNEL_DEVICETREE_PREFIX = "ti/k3-am642" >> >> KERNEL_DEVICETREE = " \ >> diff --git a/meta-ti-bsp/conf/machine/include/am65xx.inc b/meta-ti-bsp/conf/machine/include/am65xx.inc >> index 564d61b0..b848881c 100644 >> --- a/meta-ti-bsp/conf/machine/include/am65xx.inc >> +++ b/meta-ti-bsp/conf/machine/include/am65xx.inc >> @@ -3,9 +3,6 @@ SOC_FAMILY:append = ":am65xx" >> >> MACHINE_FEATURES += "screen touchscreen gpu" >> >> -SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS1" >> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >> - >> PREFERRED_PROVIDER_virtual/gpudriver ?= "" >> >> KERNEL_DEVICETREE_PREFIX = "ti/k3-am654" >> diff --git a/meta-ti-bsp/conf/machine/include/k3.inc b/meta-ti-bsp/conf/machine/include/k3.inc >> index 93bcea76..5c3c771a 100644 >> --- a/meta-ti-bsp/conf/machine/include/k3.inc >> +++ b/meta-ti-bsp/conf/machine/include/k3.inc >> @@ -53,3 +53,6 @@ MACHINE_FEATURES += "efi" >> WKS_FILE ?= "sdimage-2part-efi.wks" >> do_image_wic[depends] += "virtual/bootloader:do_deploy" >> do_image_wic[mcdepends] += "mc::k3r5:ti-sci-fw:do_deploy" >> + >> +SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS2" >> +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >> diff --git a/meta-ti-bsp/conf/machine/j7200-evm.conf b/meta-ti-bsp/conf/machine/j7200-evm.conf >> index b17b65b7..dff1da69 100644 >> --- a/meta-ti-bsp/conf/machine/j7200-evm.conf >> +++ b/meta-ti-bsp/conf/machine/j7200-evm.conf >> @@ -4,9 +4,6 @@ >> >> require conf/machine/include/j7200.inc >> >> -SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS3" >> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >> - >> KERNEL_DEVICETREE_PREFIX = "ti/k3-j7200" >> >> KERNEL_DEVICETREE = " \ >> diff --git a/meta-ti-bsp/conf/machine/j721e-evm.conf b/meta-ti-bsp/conf/machine/j721e-evm.conf >> index f602a77b..8682ad60 100644 >> --- a/meta-ti-bsp/conf/machine/j721e-evm.conf >> +++ b/meta-ti-bsp/conf/machine/j721e-evm.conf >> @@ -4,9 +4,6 @@ >> >> require conf/machine/include/j721e.inc >> >> -SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS3" >> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >> - >> KERNEL_DEVICETREE_PREFIX = " \ >> ti/k3-j721e \ >> ti/k3-j7200-mcspi-loopback \ >> diff --git a/meta-ti-bsp/conf/machine/j721s2-evm.conf b/meta-ti-bsp/conf/machine/j721s2-evm.conf >> index 1f54c7b1..a16e744d 100644 >> --- a/meta-ti-bsp/conf/machine/j721s2-evm.conf >> +++ b/meta-ti-bsp/conf/machine/j721s2-evm.conf >> @@ -4,8 +4,6 @@ >> >> require conf/machine/include/j721s2.inc >> >> -SERIAL_CONSOLES = "115200;ttyS2" >> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >> TFA_K3_USART = "0x8" >> OPTEE_K3_USART = "0x8" >> >> diff --git a/meta-ti-bsp/conf/machine/j721s2-hs-evm.conf b/meta-ti-bsp/conf/machine/j721s2-hs-evm.conf >> index 8fa98440..085c91e7 100644 >> --- a/meta-ti-bsp/conf/machine/j721s2-hs-evm.conf >> +++ b/meta-ti-bsp/conf/machine/j721s2-hs-evm.conf >> @@ -4,9 +4,6 @@ >> >> require conf/machine/include/j721s2.inc >> >> -SERIAL_CONSOLES = "115200;ttyS2" >> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >> - >> TFA_K3_USART = "0x8" >> OPTEE_K3_USART = "0x8" >> >> diff --git a/meta-ti-bsp/conf/machine/j784s4-evm.conf b/meta-ti-bsp/conf/machine/j784s4-evm.conf >> index 53bb4e4f..c0483505 100644 >> --- a/meta-ti-bsp/conf/machine/j784s4-evm.conf >> +++ b/meta-ti-bsp/conf/machine/j784s4-evm.conf >> @@ -4,8 +4,6 @@ >> >> require conf/machine/include/j784s4.inc >> >> -SERIAL_CONSOLES = "115200;ttyS2" >> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >> TFA_K3_USART = "0x8" >> OPTEE_K3_USART = "0x8" >> >> diff --git a/meta-ti-bsp/conf/machine/j784s4-hs-evm.conf b/meta-ti-bsp/conf/machine/j784s4-hs-evm.conf >> index 1c56f55a..4deb0f8b 100644 >> --- a/meta-ti-bsp/conf/machine/j784s4-hs-evm.conf >> +++ b/meta-ti-bsp/conf/machine/j784s4-hs-evm.conf >> @@ -4,8 +4,6 @@ >> >> require conf/machine/include/j784s4.inc >> >> -SERIAL_CONSOLES = "115200;ttyS2" >> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >> TFA_K3_USART = "0x8" >> OPTEEMACHINE = "k3-j784s4" >> OPTEE_K3_USART = "0x8" >> -- >> 2.39.2
On Tue, Apr 11, 2023 at 12:27:10PM -0500, Andrew Davis wrote: > On 4/5/23 6:49 PM, Denys Dmytriyenko wrote: > >On Wed, Apr 05, 2023 at 01:50:27PM -0500, Andrew Davis via lists.yoctoproject.org wrote: > >>The traditional order of serial consoles for K3 has ttyS2 being the > >>primary UART attached console. ttyS0 is also a common choice for > >>distros and the TI kernel may switch at some point. To prepare > >>we check both UARTs on all K3 devices. Move this common check > >>to a K3 common location. > > > >I see different K3 platforms use ttyS0, ttyS1, ttyS2 and ttyS3. > > > >Were others just mis-used as MCU UARTs or some other leftovers? > > > > Some look to be just misusing MCU UARTs, others types/leftovers. > Hopefully this patch unifies everything. If one wants to use > a different port then these two then can be chosen in DT. Are there any derivative boards (like SK or other product-specific spins) that use a different main UART? I remember in pre-K3 days that used to be the case for some platforms, where EVM uses one UART and SK/ICE/etc. a different one... > >>Signed-off-by: Andrew Davis <afd@ti.com> > >>--- > >> meta-ti-bsp/conf/machine/beaglebone-ai64.conf | 3 --- > >> meta-ti-bsp/conf/machine/include/am62axx.inc | 3 --- > >> meta-ti-bsp/conf/machine/include/am62xx-lp.inc | 3 --- > >> meta-ti-bsp/conf/machine/include/am62xx.inc | 3 --- > >> meta-ti-bsp/conf/machine/include/am64xx.inc | 3 --- > >> meta-ti-bsp/conf/machine/include/am65xx.inc | 3 --- > >> meta-ti-bsp/conf/machine/include/k3.inc | 3 +++ > >> meta-ti-bsp/conf/machine/j7200-evm.conf | 3 --- > >> meta-ti-bsp/conf/machine/j721e-evm.conf | 3 --- > >> meta-ti-bsp/conf/machine/j721s2-evm.conf | 2 -- > >> meta-ti-bsp/conf/machine/j721s2-hs-evm.conf | 3 --- > >> meta-ti-bsp/conf/machine/j784s4-evm.conf | 2 -- > >> meta-ti-bsp/conf/machine/j784s4-hs-evm.conf | 2 -- > >> 13 files changed, 3 insertions(+), 33 deletions(-) > >> > >>diff --git a/meta-ti-bsp/conf/machine/beaglebone-ai64.conf b/meta-ti-bsp/conf/machine/beaglebone-ai64.conf > >>index 6e8c863c..e6cba3df 100644 > >>--- a/meta-ti-bsp/conf/machine/beaglebone-ai64.conf > >>+++ b/meta-ti-bsp/conf/machine/beaglebone-ai64.conf > >>@@ -4,9 +4,6 @@ > >> require conf/machine/include/j721e.inc > >>-SERIAL_CONSOLES = "115200;ttyS2" > >>-SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > >>- > >> UBOOT_MACHINE = "j721e_evm_a72_config" > >> PREFERRED_PROVIDER_virtual/kernel = "linux-bb.org" > >>diff --git a/meta-ti-bsp/conf/machine/include/am62axx.inc b/meta-ti-bsp/conf/machine/include/am62axx.inc > >>index d0970948..0c6b8503 100644 > >>--- a/meta-ti-bsp/conf/machine/include/am62axx.inc > >>+++ b/meta-ti-bsp/conf/machine/include/am62axx.inc > >>@@ -3,9 +3,6 @@ SOC_FAMILY:append = ":am62axx" > >> MACHINE_FEATURES += "screen touchscreen" > >>-SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS2" > >>-SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > >>- > >> TFA_K3_SYSTEM_SUSPEND = "1" > >> # Default tiboot3.bin on AM62A is for HS-FS > >>diff --git a/meta-ti-bsp/conf/machine/include/am62xx-lp.inc b/meta-ti-bsp/conf/machine/include/am62xx-lp.inc > >>index d37d4673..4601603c 100644 > >>--- a/meta-ti-bsp/conf/machine/include/am62xx-lp.inc > >>+++ b/meta-ti-bsp/conf/machine/include/am62xx-lp.inc > >>@@ -3,9 +3,6 @@ SOC_FAMILY:append = ":am62xx" > >> MACHINE_FEATURES += "screen touchscreen" > >>-SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS2" > >>-SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > >>- > >> TFA_K3_SYSTEM_SUSPEND = "1" > >> # Default tiboot3.bin on AM62x LP is for HS-FS > >>diff --git a/meta-ti-bsp/conf/machine/include/am62xx.inc b/meta-ti-bsp/conf/machine/include/am62xx.inc > >>index af6a6db4..953128cc 100644 > >>--- a/meta-ti-bsp/conf/machine/include/am62xx.inc > >>+++ b/meta-ti-bsp/conf/machine/include/am62xx.inc > >>@@ -3,9 +3,6 @@ SOC_FAMILY:append = ":am62xx" > >> MACHINE_FEATURES += "screen gpu" > >>-SERIAL_CONSOLES = "115200;ttyS2" > >>-SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > >>- > >> PREFERRED_PROVIDER_virtual/gpudriver ?= "ti-img-rogue-driver" > >> # Default tiboot3.bin on AM62x is for HS-FS > >>diff --git a/meta-ti-bsp/conf/machine/include/am64xx.inc b/meta-ti-bsp/conf/machine/include/am64xx.inc > >>index 157bf5d5..c486f3c1 100644 > >>--- a/meta-ti-bsp/conf/machine/include/am64xx.inc > >>+++ b/meta-ti-bsp/conf/machine/include/am64xx.inc > >>@@ -1,9 +1,6 @@ > >> require conf/machine/include/k3.inc > >> SOC_FAMILY:append = ":am64xx" > >>-SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS1" > >>-SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > >>- > >> KERNEL_DEVICETREE_PREFIX = "ti/k3-am642" > >> KERNEL_DEVICETREE = " \ > >>diff --git a/meta-ti-bsp/conf/machine/include/am65xx.inc b/meta-ti-bsp/conf/machine/include/am65xx.inc > >>index 564d61b0..b848881c 100644 > >>--- a/meta-ti-bsp/conf/machine/include/am65xx.inc > >>+++ b/meta-ti-bsp/conf/machine/include/am65xx.inc > >>@@ -3,9 +3,6 @@ SOC_FAMILY:append = ":am65xx" > >> MACHINE_FEATURES += "screen touchscreen gpu" > >>-SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS1" > >>-SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > >>- > >> PREFERRED_PROVIDER_virtual/gpudriver ?= "" > >> KERNEL_DEVICETREE_PREFIX = "ti/k3-am654" > >>diff --git a/meta-ti-bsp/conf/machine/include/k3.inc b/meta-ti-bsp/conf/machine/include/k3.inc > >>index 93bcea76..5c3c771a 100644 > >>--- a/meta-ti-bsp/conf/machine/include/k3.inc > >>+++ b/meta-ti-bsp/conf/machine/include/k3.inc > >>@@ -53,3 +53,6 @@ MACHINE_FEATURES += "efi" > >> WKS_FILE ?= "sdimage-2part-efi.wks" > >> do_image_wic[depends] += "virtual/bootloader:do_deploy" > >> do_image_wic[mcdepends] += "mc::k3r5:ti-sci-fw:do_deploy" > >>+ > >>+SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS2" > >>+SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > >>diff --git a/meta-ti-bsp/conf/machine/j7200-evm.conf b/meta-ti-bsp/conf/machine/j7200-evm.conf > >>index b17b65b7..dff1da69 100644 > >>--- a/meta-ti-bsp/conf/machine/j7200-evm.conf > >>+++ b/meta-ti-bsp/conf/machine/j7200-evm.conf > >>@@ -4,9 +4,6 @@ > >> require conf/machine/include/j7200.inc > >>-SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS3" > >>-SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > >>- > >> KERNEL_DEVICETREE_PREFIX = "ti/k3-j7200" > >> KERNEL_DEVICETREE = " \ > >>diff --git a/meta-ti-bsp/conf/machine/j721e-evm.conf b/meta-ti-bsp/conf/machine/j721e-evm.conf > >>index f602a77b..8682ad60 100644 > >>--- a/meta-ti-bsp/conf/machine/j721e-evm.conf > >>+++ b/meta-ti-bsp/conf/machine/j721e-evm.conf > >>@@ -4,9 +4,6 @@ > >> require conf/machine/include/j721e.inc > >>-SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS3" > >>-SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > >>- > >> KERNEL_DEVICETREE_PREFIX = " \ > >> ti/k3-j721e \ > >> ti/k3-j7200-mcspi-loopback \ > >>diff --git a/meta-ti-bsp/conf/machine/j721s2-evm.conf b/meta-ti-bsp/conf/machine/j721s2-evm.conf > >>index 1f54c7b1..a16e744d 100644 > >>--- a/meta-ti-bsp/conf/machine/j721s2-evm.conf > >>+++ b/meta-ti-bsp/conf/machine/j721s2-evm.conf > >>@@ -4,8 +4,6 @@ > >> require conf/machine/include/j721s2.inc > >>-SERIAL_CONSOLES = "115200;ttyS2" > >>-SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > >> TFA_K3_USART = "0x8" > >> OPTEE_K3_USART = "0x8" > >>diff --git a/meta-ti-bsp/conf/machine/j721s2-hs-evm.conf b/meta-ti-bsp/conf/machine/j721s2-hs-evm.conf > >>index 8fa98440..085c91e7 100644 > >>--- a/meta-ti-bsp/conf/machine/j721s2-hs-evm.conf > >>+++ b/meta-ti-bsp/conf/machine/j721s2-hs-evm.conf > >>@@ -4,9 +4,6 @@ > >> require conf/machine/include/j721s2.inc > >>-SERIAL_CONSOLES = "115200;ttyS2" > >>-SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > >>- > >> TFA_K3_USART = "0x8" > >> OPTEE_K3_USART = "0x8" > >>diff --git a/meta-ti-bsp/conf/machine/j784s4-evm.conf b/meta-ti-bsp/conf/machine/j784s4-evm.conf > >>index 53bb4e4f..c0483505 100644 > >>--- a/meta-ti-bsp/conf/machine/j784s4-evm.conf > >>+++ b/meta-ti-bsp/conf/machine/j784s4-evm.conf > >>@@ -4,8 +4,6 @@ > >> require conf/machine/include/j784s4.inc > >>-SERIAL_CONSOLES = "115200;ttyS2" > >>-SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > >> TFA_K3_USART = "0x8" > >> OPTEE_K3_USART = "0x8" > >>diff --git a/meta-ti-bsp/conf/machine/j784s4-hs-evm.conf b/meta-ti-bsp/conf/machine/j784s4-hs-evm.conf > >>index 1c56f55a..4deb0f8b 100644 > >>--- a/meta-ti-bsp/conf/machine/j784s4-hs-evm.conf > >>+++ b/meta-ti-bsp/conf/machine/j784s4-hs-evm.conf > >>@@ -4,8 +4,6 @@ > >> require conf/machine/include/j784s4.inc > >>-SERIAL_CONSOLES = "115200;ttyS2" > >>-SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" > >> TFA_K3_USART = "0x8" > >> OPTEEMACHINE = "k3-j784s4" > >> OPTEE_K3_USART = "0x8" > >>-- > >>2.39.2
On 4/11/23 1:59 PM, Denys Dmytriyenko wrote: > On Tue, Apr 11, 2023 at 12:27:10PM -0500, Andrew Davis wrote: >> On 4/5/23 6:49 PM, Denys Dmytriyenko wrote: >>> On Wed, Apr 05, 2023 at 01:50:27PM -0500, Andrew Davis via lists.yoctoproject.org wrote: >>>> The traditional order of serial consoles for K3 has ttyS2 being the >>>> primary UART attached console. ttyS0 is also a common choice for >>>> distros and the TI kernel may switch at some point. To prepare >>>> we check both UARTs on all K3 devices. Move this common check >>>> to a K3 common location. >>> >>> I see different K3 platforms use ttyS0, ttyS1, ttyS2 and ttyS3. >>> >>> Were others just mis-used as MCU UARTs or some other leftovers? >>> >> >> Some look to be just misusing MCU UARTs, others types/leftovers. >> Hopefully this patch unifies everything. If one wants to use >> a different port then these two then can be chosen in DT. > > Are there any derivative boards (like SK or other product-specific spins) that > use a different main UART? I remember in pre-K3 days that used to be the case > for some platforms, where EVM uses one UART and SK/ICE/etc. a different one... > Probably, in those cases we now use DT aliases and make the default serial port always ttyS0*. That allows us to fix these differences in the kernel instead of out here in the integration layers. Since non-Arago distro's always expect ttyS0, anything else doesn't work. *(well ttyS2 for some K3 platforms even though it breaks our multi-distro story for any distro that is not Arago. Guess since it was broken before, we want to be "backwards compatible" with "broken" and keep it broken forever, IDK ask +Nishanth /rant) Andrew > >>>> Signed-off-by: Andrew Davis <afd@ti.com> >>>> --- >>>> meta-ti-bsp/conf/machine/beaglebone-ai64.conf | 3 --- >>>> meta-ti-bsp/conf/machine/include/am62axx.inc | 3 --- >>>> meta-ti-bsp/conf/machine/include/am62xx-lp.inc | 3 --- >>>> meta-ti-bsp/conf/machine/include/am62xx.inc | 3 --- >>>> meta-ti-bsp/conf/machine/include/am64xx.inc | 3 --- >>>> meta-ti-bsp/conf/machine/include/am65xx.inc | 3 --- >>>> meta-ti-bsp/conf/machine/include/k3.inc | 3 +++ >>>> meta-ti-bsp/conf/machine/j7200-evm.conf | 3 --- >>>> meta-ti-bsp/conf/machine/j721e-evm.conf | 3 --- >>>> meta-ti-bsp/conf/machine/j721s2-evm.conf | 2 -- >>>> meta-ti-bsp/conf/machine/j721s2-hs-evm.conf | 3 --- >>>> meta-ti-bsp/conf/machine/j784s4-evm.conf | 2 -- >>>> meta-ti-bsp/conf/machine/j784s4-hs-evm.conf | 2 -- >>>> 13 files changed, 3 insertions(+), 33 deletions(-) >>>> >>>> diff --git a/meta-ti-bsp/conf/machine/beaglebone-ai64.conf b/meta-ti-bsp/conf/machine/beaglebone-ai64.conf >>>> index 6e8c863c..e6cba3df 100644 >>>> --- a/meta-ti-bsp/conf/machine/beaglebone-ai64.conf >>>> +++ b/meta-ti-bsp/conf/machine/beaglebone-ai64.conf >>>> @@ -4,9 +4,6 @@ >>>> require conf/machine/include/j721e.inc >>>> -SERIAL_CONSOLES = "115200;ttyS2" >>>> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >>>> - >>>> UBOOT_MACHINE = "j721e_evm_a72_config" >>>> PREFERRED_PROVIDER_virtual/kernel = "linux-bb.org" >>>> diff --git a/meta-ti-bsp/conf/machine/include/am62axx.inc b/meta-ti-bsp/conf/machine/include/am62axx.inc >>>> index d0970948..0c6b8503 100644 >>>> --- a/meta-ti-bsp/conf/machine/include/am62axx.inc >>>> +++ b/meta-ti-bsp/conf/machine/include/am62axx.inc >>>> @@ -3,9 +3,6 @@ SOC_FAMILY:append = ":am62axx" >>>> MACHINE_FEATURES += "screen touchscreen" >>>> -SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS2" >>>> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >>>> - >>>> TFA_K3_SYSTEM_SUSPEND = "1" >>>> # Default tiboot3.bin on AM62A is for HS-FS >>>> diff --git a/meta-ti-bsp/conf/machine/include/am62xx-lp.inc b/meta-ti-bsp/conf/machine/include/am62xx-lp.inc >>>> index d37d4673..4601603c 100644 >>>> --- a/meta-ti-bsp/conf/machine/include/am62xx-lp.inc >>>> +++ b/meta-ti-bsp/conf/machine/include/am62xx-lp.inc >>>> @@ -3,9 +3,6 @@ SOC_FAMILY:append = ":am62xx" >>>> MACHINE_FEATURES += "screen touchscreen" >>>> -SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS2" >>>> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >>>> - >>>> TFA_K3_SYSTEM_SUSPEND = "1" >>>> # Default tiboot3.bin on AM62x LP is for HS-FS >>>> diff --git a/meta-ti-bsp/conf/machine/include/am62xx.inc b/meta-ti-bsp/conf/machine/include/am62xx.inc >>>> index af6a6db4..953128cc 100644 >>>> --- a/meta-ti-bsp/conf/machine/include/am62xx.inc >>>> +++ b/meta-ti-bsp/conf/machine/include/am62xx.inc >>>> @@ -3,9 +3,6 @@ SOC_FAMILY:append = ":am62xx" >>>> MACHINE_FEATURES += "screen gpu" >>>> -SERIAL_CONSOLES = "115200;ttyS2" >>>> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >>>> - >>>> PREFERRED_PROVIDER_virtual/gpudriver ?= "ti-img-rogue-driver" >>>> # Default tiboot3.bin on AM62x is for HS-FS >>>> diff --git a/meta-ti-bsp/conf/machine/include/am64xx.inc b/meta-ti-bsp/conf/machine/include/am64xx.inc >>>> index 157bf5d5..c486f3c1 100644 >>>> --- a/meta-ti-bsp/conf/machine/include/am64xx.inc >>>> +++ b/meta-ti-bsp/conf/machine/include/am64xx.inc >>>> @@ -1,9 +1,6 @@ >>>> require conf/machine/include/k3.inc >>>> SOC_FAMILY:append = ":am64xx" >>>> -SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS1" >>>> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >>>> - >>>> KERNEL_DEVICETREE_PREFIX = "ti/k3-am642" >>>> KERNEL_DEVICETREE = " \ >>>> diff --git a/meta-ti-bsp/conf/machine/include/am65xx.inc b/meta-ti-bsp/conf/machine/include/am65xx.inc >>>> index 564d61b0..b848881c 100644 >>>> --- a/meta-ti-bsp/conf/machine/include/am65xx.inc >>>> +++ b/meta-ti-bsp/conf/machine/include/am65xx.inc >>>> @@ -3,9 +3,6 @@ SOC_FAMILY:append = ":am65xx" >>>> MACHINE_FEATURES += "screen touchscreen gpu" >>>> -SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS1" >>>> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >>>> - >>>> PREFERRED_PROVIDER_virtual/gpudriver ?= "" >>>> KERNEL_DEVICETREE_PREFIX = "ti/k3-am654" >>>> diff --git a/meta-ti-bsp/conf/machine/include/k3.inc b/meta-ti-bsp/conf/machine/include/k3.inc >>>> index 93bcea76..5c3c771a 100644 >>>> --- a/meta-ti-bsp/conf/machine/include/k3.inc >>>> +++ b/meta-ti-bsp/conf/machine/include/k3.inc >>>> @@ -53,3 +53,6 @@ MACHINE_FEATURES += "efi" >>>> WKS_FILE ?= "sdimage-2part-efi.wks" >>>> do_image_wic[depends] += "virtual/bootloader:do_deploy" >>>> do_image_wic[mcdepends] += "mc::k3r5:ti-sci-fw:do_deploy" >>>> + >>>> +SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS2" >>>> +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >>>> diff --git a/meta-ti-bsp/conf/machine/j7200-evm.conf b/meta-ti-bsp/conf/machine/j7200-evm.conf >>>> index b17b65b7..dff1da69 100644 >>>> --- a/meta-ti-bsp/conf/machine/j7200-evm.conf >>>> +++ b/meta-ti-bsp/conf/machine/j7200-evm.conf >>>> @@ -4,9 +4,6 @@ >>>> require conf/machine/include/j7200.inc >>>> -SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS3" >>>> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >>>> - >>>> KERNEL_DEVICETREE_PREFIX = "ti/k3-j7200" >>>> KERNEL_DEVICETREE = " \ >>>> diff --git a/meta-ti-bsp/conf/machine/j721e-evm.conf b/meta-ti-bsp/conf/machine/j721e-evm.conf >>>> index f602a77b..8682ad60 100644 >>>> --- a/meta-ti-bsp/conf/machine/j721e-evm.conf >>>> +++ b/meta-ti-bsp/conf/machine/j721e-evm.conf >>>> @@ -4,9 +4,6 @@ >>>> require conf/machine/include/j721e.inc >>>> -SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS3" >>>> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >>>> - >>>> KERNEL_DEVICETREE_PREFIX = " \ >>>> ti/k3-j721e \ >>>> ti/k3-j7200-mcspi-loopback \ >>>> diff --git a/meta-ti-bsp/conf/machine/j721s2-evm.conf b/meta-ti-bsp/conf/machine/j721s2-evm.conf >>>> index 1f54c7b1..a16e744d 100644 >>>> --- a/meta-ti-bsp/conf/machine/j721s2-evm.conf >>>> +++ b/meta-ti-bsp/conf/machine/j721s2-evm.conf >>>> @@ -4,8 +4,6 @@ >>>> require conf/machine/include/j721s2.inc >>>> -SERIAL_CONSOLES = "115200;ttyS2" >>>> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >>>> TFA_K3_USART = "0x8" >>>> OPTEE_K3_USART = "0x8" >>>> diff --git a/meta-ti-bsp/conf/machine/j721s2-hs-evm.conf b/meta-ti-bsp/conf/machine/j721s2-hs-evm.conf >>>> index 8fa98440..085c91e7 100644 >>>> --- a/meta-ti-bsp/conf/machine/j721s2-hs-evm.conf >>>> +++ b/meta-ti-bsp/conf/machine/j721s2-hs-evm.conf >>>> @@ -4,9 +4,6 @@ >>>> require conf/machine/include/j721s2.inc >>>> -SERIAL_CONSOLES = "115200;ttyS2" >>>> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >>>> - >>>> TFA_K3_USART = "0x8" >>>> OPTEE_K3_USART = "0x8" >>>> diff --git a/meta-ti-bsp/conf/machine/j784s4-evm.conf b/meta-ti-bsp/conf/machine/j784s4-evm.conf >>>> index 53bb4e4f..c0483505 100644 >>>> --- a/meta-ti-bsp/conf/machine/j784s4-evm.conf >>>> +++ b/meta-ti-bsp/conf/machine/j784s4-evm.conf >>>> @@ -4,8 +4,6 @@ >>>> require conf/machine/include/j784s4.inc >>>> -SERIAL_CONSOLES = "115200;ttyS2" >>>> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >>>> TFA_K3_USART = "0x8" >>>> OPTEE_K3_USART = "0x8" >>>> diff --git a/meta-ti-bsp/conf/machine/j784s4-hs-evm.conf b/meta-ti-bsp/conf/machine/j784s4-hs-evm.conf >>>> index 1c56f55a..4deb0f8b 100644 >>>> --- a/meta-ti-bsp/conf/machine/j784s4-hs-evm.conf >>>> +++ b/meta-ti-bsp/conf/machine/j784s4-hs-evm.conf >>>> @@ -4,8 +4,6 @@ >>>> require conf/machine/include/j784s4.inc >>>> -SERIAL_CONSOLES = "115200;ttyS2" >>>> -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" >>>> TFA_K3_USART = "0x8" >>>> OPTEEMACHINE = "k3-j784s4" >>>> OPTEE_K3_USART = "0x8" >>>> -- >>>> 2.39.2
diff --git a/meta-ti-bsp/conf/machine/beaglebone-ai64.conf b/meta-ti-bsp/conf/machine/beaglebone-ai64.conf index 6e8c863c..e6cba3df 100644 --- a/meta-ti-bsp/conf/machine/beaglebone-ai64.conf +++ b/meta-ti-bsp/conf/machine/beaglebone-ai64.conf @@ -4,9 +4,6 @@ require conf/machine/include/j721e.inc -SERIAL_CONSOLES = "115200;ttyS2" -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" - UBOOT_MACHINE = "j721e_evm_a72_config" PREFERRED_PROVIDER_virtual/kernel = "linux-bb.org" diff --git a/meta-ti-bsp/conf/machine/include/am62axx.inc b/meta-ti-bsp/conf/machine/include/am62axx.inc index d0970948..0c6b8503 100644 --- a/meta-ti-bsp/conf/machine/include/am62axx.inc +++ b/meta-ti-bsp/conf/machine/include/am62axx.inc @@ -3,9 +3,6 @@ SOC_FAMILY:append = ":am62axx" MACHINE_FEATURES += "screen touchscreen" -SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS2" -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" - TFA_K3_SYSTEM_SUSPEND = "1" # Default tiboot3.bin on AM62A is for HS-FS diff --git a/meta-ti-bsp/conf/machine/include/am62xx-lp.inc b/meta-ti-bsp/conf/machine/include/am62xx-lp.inc index d37d4673..4601603c 100644 --- a/meta-ti-bsp/conf/machine/include/am62xx-lp.inc +++ b/meta-ti-bsp/conf/machine/include/am62xx-lp.inc @@ -3,9 +3,6 @@ SOC_FAMILY:append = ":am62xx" MACHINE_FEATURES += "screen touchscreen" -SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS2" -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" - TFA_K3_SYSTEM_SUSPEND = "1" # Default tiboot3.bin on AM62x LP is for HS-FS diff --git a/meta-ti-bsp/conf/machine/include/am62xx.inc b/meta-ti-bsp/conf/machine/include/am62xx.inc index af6a6db4..953128cc 100644 --- a/meta-ti-bsp/conf/machine/include/am62xx.inc +++ b/meta-ti-bsp/conf/machine/include/am62xx.inc @@ -3,9 +3,6 @@ SOC_FAMILY:append = ":am62xx" MACHINE_FEATURES += "screen gpu" -SERIAL_CONSOLES = "115200;ttyS2" -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" - PREFERRED_PROVIDER_virtual/gpudriver ?= "ti-img-rogue-driver" # Default tiboot3.bin on AM62x is for HS-FS diff --git a/meta-ti-bsp/conf/machine/include/am64xx.inc b/meta-ti-bsp/conf/machine/include/am64xx.inc index 157bf5d5..c486f3c1 100644 --- a/meta-ti-bsp/conf/machine/include/am64xx.inc +++ b/meta-ti-bsp/conf/machine/include/am64xx.inc @@ -1,9 +1,6 @@ require conf/machine/include/k3.inc SOC_FAMILY:append = ":am64xx" -SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS1" -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" - KERNEL_DEVICETREE_PREFIX = "ti/k3-am642" KERNEL_DEVICETREE = " \ diff --git a/meta-ti-bsp/conf/machine/include/am65xx.inc b/meta-ti-bsp/conf/machine/include/am65xx.inc index 564d61b0..b848881c 100644 --- a/meta-ti-bsp/conf/machine/include/am65xx.inc +++ b/meta-ti-bsp/conf/machine/include/am65xx.inc @@ -3,9 +3,6 @@ SOC_FAMILY:append = ":am65xx" MACHINE_FEATURES += "screen touchscreen gpu" -SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS1" -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" - PREFERRED_PROVIDER_virtual/gpudriver ?= "" KERNEL_DEVICETREE_PREFIX = "ti/k3-am654" diff --git a/meta-ti-bsp/conf/machine/include/k3.inc b/meta-ti-bsp/conf/machine/include/k3.inc index 93bcea76..5c3c771a 100644 --- a/meta-ti-bsp/conf/machine/include/k3.inc +++ b/meta-ti-bsp/conf/machine/include/k3.inc @@ -53,3 +53,6 @@ MACHINE_FEATURES += "efi" WKS_FILE ?= "sdimage-2part-efi.wks" do_image_wic[depends] += "virtual/bootloader:do_deploy" do_image_wic[mcdepends] += "mc::k3r5:ti-sci-fw:do_deploy" + +SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS2" +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" diff --git a/meta-ti-bsp/conf/machine/j7200-evm.conf b/meta-ti-bsp/conf/machine/j7200-evm.conf index b17b65b7..dff1da69 100644 --- a/meta-ti-bsp/conf/machine/j7200-evm.conf +++ b/meta-ti-bsp/conf/machine/j7200-evm.conf @@ -4,9 +4,6 @@ require conf/machine/include/j7200.inc -SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS3" -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" - KERNEL_DEVICETREE_PREFIX = "ti/k3-j7200" KERNEL_DEVICETREE = " \ diff --git a/meta-ti-bsp/conf/machine/j721e-evm.conf b/meta-ti-bsp/conf/machine/j721e-evm.conf index f602a77b..8682ad60 100644 --- a/meta-ti-bsp/conf/machine/j721e-evm.conf +++ b/meta-ti-bsp/conf/machine/j721e-evm.conf @@ -4,9 +4,6 @@ require conf/machine/include/j721e.inc -SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS3" -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" - KERNEL_DEVICETREE_PREFIX = " \ ti/k3-j721e \ ti/k3-j7200-mcspi-loopback \ diff --git a/meta-ti-bsp/conf/machine/j721s2-evm.conf b/meta-ti-bsp/conf/machine/j721s2-evm.conf index 1f54c7b1..a16e744d 100644 --- a/meta-ti-bsp/conf/machine/j721s2-evm.conf +++ b/meta-ti-bsp/conf/machine/j721s2-evm.conf @@ -4,8 +4,6 @@ require conf/machine/include/j721s2.inc -SERIAL_CONSOLES = "115200;ttyS2" -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" TFA_K3_USART = "0x8" OPTEE_K3_USART = "0x8" diff --git a/meta-ti-bsp/conf/machine/j721s2-hs-evm.conf b/meta-ti-bsp/conf/machine/j721s2-hs-evm.conf index 8fa98440..085c91e7 100644 --- a/meta-ti-bsp/conf/machine/j721s2-hs-evm.conf +++ b/meta-ti-bsp/conf/machine/j721s2-hs-evm.conf @@ -4,9 +4,6 @@ require conf/machine/include/j721s2.inc -SERIAL_CONSOLES = "115200;ttyS2" -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" - TFA_K3_USART = "0x8" OPTEE_K3_USART = "0x8" diff --git a/meta-ti-bsp/conf/machine/j784s4-evm.conf b/meta-ti-bsp/conf/machine/j784s4-evm.conf index 53bb4e4f..c0483505 100644 --- a/meta-ti-bsp/conf/machine/j784s4-evm.conf +++ b/meta-ti-bsp/conf/machine/j784s4-evm.conf @@ -4,8 +4,6 @@ require conf/machine/include/j784s4.inc -SERIAL_CONSOLES = "115200;ttyS2" -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" TFA_K3_USART = "0x8" OPTEE_K3_USART = "0x8" diff --git a/meta-ti-bsp/conf/machine/j784s4-hs-evm.conf b/meta-ti-bsp/conf/machine/j784s4-hs-evm.conf index 1c56f55a..4deb0f8b 100644 --- a/meta-ti-bsp/conf/machine/j784s4-hs-evm.conf +++ b/meta-ti-bsp/conf/machine/j784s4-hs-evm.conf @@ -4,8 +4,6 @@ require conf/machine/include/j784s4.inc -SERIAL_CONSOLES = "115200;ttyS2" -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" TFA_K3_USART = "0x8" OPTEEMACHINE = "k3-j784s4" OPTEE_K3_USART = "0x8"
The traditional order of serial consoles for K3 has ttyS2 being the primary UART attached console. ttyS0 is also a common choice for distros and the TI kernel may switch at some point. To prepare we check both UARTs on all K3 devices. Move this common check to a K3 common location. Signed-off-by: Andrew Davis <afd@ti.com> --- meta-ti-bsp/conf/machine/beaglebone-ai64.conf | 3 --- meta-ti-bsp/conf/machine/include/am62axx.inc | 3 --- meta-ti-bsp/conf/machine/include/am62xx-lp.inc | 3 --- meta-ti-bsp/conf/machine/include/am62xx.inc | 3 --- meta-ti-bsp/conf/machine/include/am64xx.inc | 3 --- meta-ti-bsp/conf/machine/include/am65xx.inc | 3 --- meta-ti-bsp/conf/machine/include/k3.inc | 3 +++ meta-ti-bsp/conf/machine/j7200-evm.conf | 3 --- meta-ti-bsp/conf/machine/j721e-evm.conf | 3 --- meta-ti-bsp/conf/machine/j721s2-evm.conf | 2 -- meta-ti-bsp/conf/machine/j721s2-hs-evm.conf | 3 --- meta-ti-bsp/conf/machine/j784s4-evm.conf | 2 -- meta-ti-bsp/conf/machine/j784s4-hs-evm.conf | 2 -- 13 files changed, 3 insertions(+), 33 deletions(-)