[meta-arm] arm-bsp/n1sdp-board-firmware: include RAM firmware for secondary device

Submitted by Khasim Mohammed on Nov. 19, 2020, 5:50 p.m. | Patch ID: 178145

Details

Message ID 20201119175040.32665-1-khasim.mohammed@arm.com
State Superseded
Headers show

Commit Message

Khasim Mohammed Nov. 19, 2020, 5:50 p.m. 
From: Khasim Mohammed <khasim.mohammed@arm.com>


While testing multi-chip mode it was observed that n1sdp running
as secondary device needs scp and mcp RAM firmware as well.

This issue wasn't captured earlier as QSPI flash had RAM firmware installed
and it doesn't get erased automatically therefore the device was able to
load it on every reboot.

Change-Id: Ied9d24429c7025206e35f50c8e5b6f090a590015
Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@arm.com>

---
 .../recipes-bsp/images/sdcard-image-n1sdp_0.1.bb   | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

-- 
2.17.1
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#1400): https://lists.yoctoproject.org/g/meta-arm/message/1400
Mute This Topic: https://lists.yoctoproject.org/mt/78370827/1003190
Group Owner: meta-arm+owner@lists.yoctoproject.org
Unsubscribe: https://lists.yoctoproject.org/g/meta-arm/unsub [mhalstead@linuxfoundation.org]
-=-=-=-=-=-=-=-=-=-=-=-

Patch hide | download patch | download mbox 

diff --git a/meta-arm-bsp/recipes-bsp/images/sdcard-image-n1sdp_0.1.bb b/meta-arm-bsp/recipes-bsp/images/sdcard-image-n1sdp_0.1.bb
index 13fa560..1ce0fbc 100644
--- a/meta-arm-bsp/recipes-bsp/images/sdcard-image-n1sdp_0.1.bb
+++ b/meta-arm-bsp/recipes-bsp/images/sdcard-image-n1sdp_0.1.bb
@@ -18,9 +18,7 @@  FIRMWARE_DIR = "n1sdp-board-firmware_source"
 PRIMARY_DIR = "${WORKDIR}/n1sdp-board-firmware_primary"
 SECONDARY_DIR = "${WORKDIR}/n1sdp-board-firmware_secondary"
 
-SOC_BINARIES_PRIMARY = "mcp_fw.bin scp_fw.bin ${SOC_BINARIES_SECONDARY}"
-SOC_BINARIES_SECONDARY = "mcp_rom.bin scp_rom.bin"
-
+SOC_BINARIES = "mcp_fw.bin scp_fw.bin mcp_rom.bin scp_rom.bin"
 
 prepare_package() {
     cd ${WORKDIR}
@@ -33,7 +31,7 @@  prepare_package() {
     cp -v ${RECIPE_SYSROOT}/firmware/uefi.bin ${PRIMARY_DIR}/SOFTWARE/
 
     # Copy SOC binaries
-    for f in ${SOC_BINARIES_PRIMARY}; do
+    for f in ${SOC_BINARIES}; do
         cp -v ${RECIPE_SYSROOT}/firmware/${f} ${PRIMARY_DIR}/SOFTWARE/
     done
 
@@ -49,7 +47,7 @@  prepare_package() {
     mkdir -p ${SECONDARY_DIR}/SOFTWARE/
 
     # Copy SOC binaries
-    for f in ${SOC_BINARIES_SECONDARY}; do
+    for f in ${SOC_BINARIES}; do
         cp -v ${RECIPE_SYSROOT}/firmware/${f} ${SECONDARY_DIR}/SOFTWARE/
     done
 
@@ -59,10 +57,8 @@  prepare_package() {
         ${SECONDARY_DIR}/MB/HBI0316A/io_v123f.txt
     sed -i -e 's|.*SOCCON: 0x1170.*PLATFORM_CTRL.*|SOCCON: 0x1170 0x00000101   ;SoC SCC PLATFORM_CTRL|' \
         ${SECONDARY_DIR}/MB/HBI0316A/io_v123f.txt
-    sed -i -e '/^TOTALIMAGES:/ s|5|2|' ${SECONDARY_DIR}/MB/HBI0316A/images.txt
-    sed -i -e 's|^IMAGE[^23]|;&|' ${SECONDARY_DIR}/MB/HBI0316A/images.txt
-    sed -i -e 's|^IMAGE2|IMAGE0|' ${SECONDARY_DIR}/MB/HBI0316A/images.txt
-    sed -i -e 's|^IMAGE3|IMAGE1|' ${SECONDARY_DIR}/MB/HBI0316A/images.txt
+    sed -i -e '/^TOTALIMAGES:/ s|5|4|' ${SECONDARY_DIR}/MB/HBI0316A/images.txt
+    sed -i -e 's|^IMAGE4|;&|' ${SECONDARY_DIR}/MB/HBI0316A/images.txt
 }
 
 do_deploy() {

Comments

Khasim Mohammed Nov. 26, 2020, 7:23 a.m. 
This is a system generated Comment: Patch 178145 was automatically marked as superseded by patch 178252.