[meta-arm] arm-autonomy/documentation: Update arm-autonomy-quickstart.md with dependencies

Submitted by Nathan Dunne on Sept. 22, 2020, 8:46 a.m. | Patch ID: 176695

Details

Message ID 20200922084639.15621-1-Nathan.Dunne@arm.com
State New
Headers show

Commit Message

Nathan Dunne Sept. 22, 2020, 8:46 a.m.
Added dependencies on meta-kernel and meta-arm/meta-arm-toolchain layers
to quick start guide instructions.

Change-Id: I7d5a3c631ccdcc7a39b8003a958d5f68ecb606c7
Issue-Id: SCM-1298
Signed-off-by: Nathan Dunne <Nathan.Dunne@arm.com>
---
 .../documentation/arm-autonomy-quickstart.md        | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

Patch hide | download patch | download mbox

diff --git a/meta-arm-autonomy/documentation/arm-autonomy-quickstart.md b/meta-arm-autonomy/documentation/arm-autonomy-quickstart.md
index 2a457c1..eb02b3a 100644
--- a/meta-arm-autonomy/documentation/arm-autonomy-quickstart.md
+++ b/meta-arm-autonomy/documentation/arm-autonomy-quickstart.md
@@ -26,6 +26,7 @@  First you must download the Yocto layers needed:
  - [poky](https://git.yoctoproject.org/poky)
  - [meta-virtualization](https://git.yoctoproject.org/meta-virtualization)
  - [meta-arm](https://git.yoctoproject.org/meta-arm)
+ - [meta-kernel](https://gitlab.com/openembedded/community/meta-kernel.git)
  - all other layers you might want to use
 
 For each of the downloaded layer make sure you checkout the release of Yocto
@@ -56,8 +57,9 @@  Here are the main steps to create an arm-autonomy project:
   bitbake-layers add-layer $LAYERDIR_BASE/meta-poky $LAYERDIR_BASE/meta-yocto-bsp \
    $LAYERDIR_BASE/meta-openembedded/meta-oe $LAYERDIR_BASE/meta-openembedded/meta-python \
    $LAYERDIR_BASE/meta-openembedded/meta-filesystems $LAYERDIR_BASE/meta-openembedded/meta-networking \
-   $LAYERDIR_BASE/meta-virtualization $LAYERDIR_BASE/meta-arm/meta-arm-autonomy \
-   $LAYERDIR_BASE/meta-arm/meta-arm $LAYERDIR_BASE/meta-arm/meta-arm-bsp
+   $LAYERDIR_BASE/meta-virtualization $LAYERDIR_BASE/meta-kernel \
+   $LAYERDIR_BASE/meta-arm/meta-arm $LAYERDIR_BASE/meta-arm/meta-arm-toolchain \
+   $LAYERDIR_BASE/meta-arm/meta-arm-bsp $LAYERDIR_BASE/meta-arm/meta-arm-autonomy \
   ```
 
   Example of a `conf/bblayers.conf`:
@@ -71,12 +73,17 @@  Here are the main steps to create an arm-autonomy project:
     /home/user/arm-autonomy/meta-openembedded/meta-filesystems \
     /home/user/arm-autonomy/meta-openembedded/meta-networking \
     /home/user/arm-autonomy/meta-virtualization \
-    /home/user/arm-autonomy/meta-arm/meta-arm-autonomy \
+    /home/user/arm-autonomy/meta-kernel \
     /home/user/arm-autonomy/meta-arm/meta-arm \
+    /home/user/arm-autonomy/meta-arm/meta-arm-toolchain \
     /home/user/arm-autonomy/meta-arm/meta-arm-bsp \
+    /home/user/arm-autonomy/meta-arm/meta-arm-autonomy \
     "
   ```
 
+  Be aware that changing the order may break some dependencies if editing the
+  config file manually.
+
 Those steps will have to be done for each project you will have to create.
 
 Host project

Comments

Diego Sueiro Sept. 22, 2020, 8:53 a.m.
On Tue, Sep 22, 2020 at 09:47 AM, Nathan Dunne wrote:

>
> Added dependencies on meta-kernel and meta-arm/meta-arm-toolchain layers
> to quick start guide instructions.
> 
> Change-Id: I7d5a3c631ccdcc7a39b8003a958d5f68ecb606c7
> Issue-Id: SCM-1298
> Signed-off-by: Nathan Dunne <Nathan.Dunne@arm.com>
> ---

Reviewed-by: Diego Sueiro <diego.sueiro@arm.com>

>  .../documentation/arm-autonomy-quickstart.md        | 13 ++++++++++---
>  1 file changed, 10 insertions(+), 3 deletions(-)
> 
> diff --git a/meta-arm-autonomy/documentation/arm-autonomy-quickstart.md
> b/meta-arm-autonomy/documentation/arm-autonomy-quickstart.md
> index 2a457c1..eb02b3a 100644
> --- a/meta-arm-autonomy/documentation/arm-autonomy-quickstart.md
> +++ b/meta-arm-autonomy/documentation/arm-autonomy-quickstart.md
> @@ -26,6 +26,7 @@ First you must download the Yocto layers needed:
>   - [poky](https://git.yoctoproject.org/poky)
>   - [meta-virtualization](https://git.yoctoproject.org/meta-virtualization)
>   - [meta-arm](https://git.yoctoproject.org/meta-arm)
> + - [meta-kernel](https://gitlab.com/openembedded/community/meta-kernel.git)
>   - all other layers you might want to use
>  
>  For each of the downloaded layer make sure you checkout the release of Yocto
> @@ -56,8 +57,9 @@ Here are the main steps to create an arm-autonomy project:
>    bitbake-layers add-layer $LAYERDIR_BASE/meta-poky
> $LAYERDIR_BASE/meta-yocto-bsp \
>     $LAYERDIR_BASE/meta-openembedded/meta-oe
> $LAYERDIR_BASE/meta-openembedded/meta-python \
>     $LAYERDIR_BASE/meta-openembedded/meta-filesystems
> $LAYERDIR_BASE/meta-openembedded/meta-networking \
> -   $LAYERDIR_BASE/meta-virtualization
> $LAYERDIR_BASE/meta-arm/meta-arm-autonomy \
> -   $LAYERDIR_BASE/meta-arm/meta-arm $LAYERDIR_BASE/meta-arm/meta-arm-bsp
> +   $LAYERDIR_BASE/meta-virtualization $LAYERDIR_BASE/meta-kernel \
> +   $LAYERDIR_BASE/meta-arm/meta-arm
> $LAYERDIR_BASE/meta-arm/meta-arm-toolchain \
> +   $LAYERDIR_BASE/meta-arm/meta-arm-bsp
> $LAYERDIR_BASE/meta-arm/meta-arm-autonomy \
>    ```
>  
>    Example of a `conf/bblayers.conf`:
> @@ -71,12 +73,17 @@ Here are the main steps to create an arm-autonomy project:
>      /home/user/arm-autonomy/meta-openembedded/meta-filesystems \
>      /home/user/arm-autonomy/meta-openembedded/meta-networking \
>      /home/user/arm-autonomy/meta-virtualization \
> -    /home/user/arm-autonomy/meta-arm/meta-arm-autonomy \
> +    /home/user/arm-autonomy/meta-kernel \
>      /home/user/arm-autonomy/meta-arm/meta-arm \
> +    /home/user/arm-autonomy/meta-arm/meta-arm-toolchain \
>      /home/user/arm-autonomy/meta-arm/meta-arm-bsp \
> +    /home/user/arm-autonomy/meta-arm/meta-arm-autonomy \
>      "
>    ```
>  
> +  Be aware that changing the order may break some dependencies if editing the
> +  config file manually.
> +
>  Those steps will have to be done for each project you will have to create.
>  
>  Host project
> -- 
> 2.17.1
> 
>
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#1136): https://lists.yoctoproject.org/g/meta-arm/message/1136
Mute This Topic: https://lists.yoctoproject.org/mt/77009296/3617530
Group Owner: meta-arm+owner@lists.yoctoproject.org
Unsubscribe: https://lists.yoctoproject.org/g/meta-arm/unsub [oe-patchwork@oe-patch.openembedded.org]
-=-=-=-=-=-=-=-=-=-=-=-
Jon Mason Sept. 23, 2020, 1:37 a.m.
On Tue, Sep 22, 2020 at 01:53:18AM -0700, Diego Sueiro wrote:
> On Tue, Sep 22, 2020 at 09:47 AM, Nathan Dunne wrote:
> 
> >
> > Added dependencies on meta-kernel and meta-arm/meta-arm-toolchain layers
> > to quick start guide instructions.
> > 
> > Change-Id: I7d5a3c631ccdcc7a39b8003a958d5f68ecb606c7
> > Issue-Id: SCM-1298
> > Signed-off-by: Nathan Dunne <Nathan.Dunne@arm.com>
> > ---
> 
> Reviewed-by: Diego Sueiro <diego.sueiro@arm.com>

Applied to master.

Thanks,
Jon

> 
> >  .../documentation/arm-autonomy-quickstart.md        | 13 ++++++++++---
> >  1 file changed, 10 insertions(+), 3 deletions(-)
> > 
> > diff --git a/meta-arm-autonomy/documentation/arm-autonomy-quickstart.md
> > b/meta-arm-autonomy/documentation/arm-autonomy-quickstart.md
> > index 2a457c1..eb02b3a 100644
> > --- a/meta-arm-autonomy/documentation/arm-autonomy-quickstart.md
> > +++ b/meta-arm-autonomy/documentation/arm-autonomy-quickstart.md
> > @@ -26,6 +26,7 @@ First you must download the Yocto layers needed:
> >   - [poky](https://git.yoctoproject.org/poky)
> >   - [meta-virtualization](https://git.yoctoproject.org/meta-virtualization)
> >   - [meta-arm](https://git.yoctoproject.org/meta-arm)
> > + - [meta-kernel](https://gitlab.com/openembedded/community/meta-kernel.git)
> >   - all other layers you might want to use
> >
> >  For each of the downloaded layer make sure you checkout the release of Yocto
> > @@ -56,8 +57,9 @@ Here are the main steps to create an arm-autonomy project:
> >    bitbake-layers add-layer $LAYERDIR_BASE/meta-poky
> > $LAYERDIR_BASE/meta-yocto-bsp \
> >     $LAYERDIR_BASE/meta-openembedded/meta-oe
> > $LAYERDIR_BASE/meta-openembedded/meta-python \
> >     $LAYERDIR_BASE/meta-openembedded/meta-filesystems
> > $LAYERDIR_BASE/meta-openembedded/meta-networking \
> > -   $LAYERDIR_BASE/meta-virtualization
> > $LAYERDIR_BASE/meta-arm/meta-arm-autonomy \
> > -   $LAYERDIR_BASE/meta-arm/meta-arm $LAYERDIR_BASE/meta-arm/meta-arm-bsp
> > +   $LAYERDIR_BASE/meta-virtualization $LAYERDIR_BASE/meta-kernel \
> > +   $LAYERDIR_BASE/meta-arm/meta-arm
> > $LAYERDIR_BASE/meta-arm/meta-arm-toolchain \
> > +   $LAYERDIR_BASE/meta-arm/meta-arm-bsp
> > $LAYERDIR_BASE/meta-arm/meta-arm-autonomy \
> >    ```
> >
> >    Example of a `conf/bblayers.conf`:
> > @@ -71,12 +73,17 @@ Here are the main steps to create an arm-autonomy project:
> >      /home/user/arm-autonomy/meta-openembedded/meta-filesystems \
> >      /home/user/arm-autonomy/meta-openembedded/meta-networking \
> >      /home/user/arm-autonomy/meta-virtualization \
> > -    /home/user/arm-autonomy/meta-arm/meta-arm-autonomy \
> > +    /home/user/arm-autonomy/meta-kernel \
> >      /home/user/arm-autonomy/meta-arm/meta-arm \
> > +    /home/user/arm-autonomy/meta-arm/meta-arm-toolchain \
> >      /home/user/arm-autonomy/meta-arm/meta-arm-bsp \
> > +    /home/user/arm-autonomy/meta-arm/meta-arm-autonomy \
> >      "
> >    ```
> >
> > +  Be aware that changing the order may break some dependencies if editing the
> > +  config file manually.
> > +
> >  Those steps will have to be done for each project you will have to create.
> >
> >  Host project
> > -- 
> > 2.17.1
> > 
> >

> 
> 
>
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#1139): https://lists.yoctoproject.org/g/meta-arm/message/1139
Mute This Topic: https://lists.yoctoproject.org/mt/77009296/3617530
Group Owner: meta-arm+owner@lists.yoctoproject.org
Unsubscribe: https://lists.yoctoproject.org/g/meta-arm/unsub [oe-patchwork@oe-patch.openembedded.org]
-=-=-=-=-=-=-=-=-=-=-=-
Nathan Dunne Sept. 23, 2020, 8:37 a.m.
On Tue, Sep 22, 2020 at 06:37 PM, Jon Mason wrote:

> 
> On Tue, Sep 22, 2020 at 01:53:18AM -0700, Diego Sueiro wrote:
> 
>> On Tue, Sep 22, 2020 at 09:47 AM, Nathan Dunne wrote:
>> 
>> 
>>> Added dependencies on meta-kernel and meta-arm/meta-arm-toolchain layers
>>> to quick start guide instructions.
>>> 
>>> Change-Id: I7d5a3c631ccdcc7a39b8003a958d5f68ecb606c7
>>> Issue-Id: SCM-1298
>>> Signed-off-by: Nathan Dunne <Nathan.Dunne@arm.com>
>>> ---
>> 
>> Reviewed-by: Diego Sueiro <diego.sueiro@arm.com>
> 
> Applied to master.
> 
> Thanks,
> Jon

Thanks.

Could this patch be backported to dunfell please?

> 
> 
> 
>> 
>>> .../documentation/arm-autonomy-quickstart.md | 13 ++++++++++---
>>> 1 file changed, 10 insertions(+), 3 deletions(-)
>>> 
>>> diff --git a/meta-arm-autonomy/documentation/arm-autonomy-quickstart.md
>>> b/meta-arm-autonomy/documentation/arm-autonomy-quickstart.md
>>> index 2a457c1..eb02b3a 100644
>>> --- a/meta-arm-autonomy/documentation/arm-autonomy-quickstart.md
>>> +++ b/meta-arm-autonomy/documentation/arm-autonomy-quickstart.md
>>> @@ -26,6 +26,7 @@ First you must download the Yocto layers needed:
>>> - [poky]( https://git.yoctoproject.org/poky )
>>> - [meta-virtualization]( https://git.yoctoproject.org/meta-virtualization )
>>> 
>>> - [meta-arm]( https://git.yoctoproject.org/meta-arm )
>>> + - [meta-kernel]( https://gitlab.com/openembedded/community/meta-kernel.git
>>> )
>>> - all other layers you might want to use
>>> 
>>> For each of the downloaded layer make sure you checkout the release of
>>> Yocto
>>> @@ -56,8 +57,9 @@ Here are the main steps to create an arm-autonomy
>>> project:
>>> bitbake-layers add-layer $LAYERDIR_BASE/meta-poky
>>> $LAYERDIR_BASE/meta-yocto-bsp \
>>> $LAYERDIR_BASE/meta-openembedded/meta-oe
>>> $LAYERDIR_BASE/meta-openembedded/meta-python \
>>> $LAYERDIR_BASE/meta-openembedded/meta-filesystems
>>> $LAYERDIR_BASE/meta-openembedded/meta-networking \
>>> - $LAYERDIR_BASE/meta-virtualization
>>> $LAYERDIR_BASE/meta-arm/meta-arm-autonomy \
>>> - $LAYERDIR_BASE/meta-arm/meta-arm $LAYERDIR_BASE/meta-arm/meta-arm-bsp
>>> + $LAYERDIR_BASE/meta-virtualization $LAYERDIR_BASE/meta-kernel \
>>> + $LAYERDIR_BASE/meta-arm/meta-arm
>>> $LAYERDIR_BASE/meta-arm/meta-arm-toolchain \
>>> + $LAYERDIR_BASE/meta-arm/meta-arm-bsp
>>> $LAYERDIR_BASE/meta-arm/meta-arm-autonomy \
>>> ```
>>> 
>>> Example of a `conf/bblayers.conf`:
>>> @@ -71,12 +73,17 @@ Here are the main steps to create an arm-autonomy
>>> project:
>>> /home/user/arm-autonomy/meta-openembedded/meta-filesystems \
>>> /home/user/arm-autonomy/meta-openembedded/meta-networking \
>>> /home/user/arm-autonomy/meta-virtualization \
>>> - /home/user/arm-autonomy/meta-arm/meta-arm-autonomy \
>>> + /home/user/arm-autonomy/meta-kernel \
>>> /home/user/arm-autonomy/meta-arm/meta-arm \
>>> + /home/user/arm-autonomy/meta-arm/meta-arm-toolchain \
>>> /home/user/arm-autonomy/meta-arm/meta-arm-bsp \
>>> + /home/user/arm-autonomy/meta-arm/meta-arm-autonomy \
>>> "
>>> ```
>>> 
>>> + Be aware that changing the order may break some dependencies if editing
>>> the
>>> + config file manually.
>>> +
>>> Those steps will have to be done for each project you will have to create.
>>> 
>>> 
>>> Host project
>>> --
>>> 2.17.1
>> 
>> 
> 
>
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#1140): https://lists.yoctoproject.org/g/meta-arm/message/1140
Mute This Topic: https://lists.yoctoproject.org/mt/77009296/3617530
Group Owner: meta-arm+owner@lists.yoctoproject.org
Unsubscribe: https://lists.yoctoproject.org/g/meta-arm/unsub [oe-patchwork@oe-patch.openembedded.org]
-=-=-=-=-=-=-=-=-=-=-=-