@@ -14,7 +14,7 @@ do_compile () {
do_install () {
install -d ${D}${bindir}
- install -m 755 ${WORKDIR}/gdb.sh ${D}${bindir}/
+ install -m 755 ${S}/gdb.sh ${D}${bindir}/
install -m 755 hello1 ${D}${bindir}/hello1
ln ${D}${bindir}/hello1 ${D}${bindir}/hello2
@@ -38,15 +38,15 @@ INITSCRIPT_PARAMS = "start 39 S . stop 31 0 6 ."
do_install() {
# Only install the init script when 'sysvinit' is in DISTRO_FEATURES.
if ${@bb.utils.contains('DISTRO_FEATURES','sysvinit','true','false',d)}; then
- sed -i -e "s:#STATEDIR#:${localstatedir}/lib/alsa:g" ${WORKDIR}/alsa-state-init
+ sed -i -e "s:#STATEDIR#:${localstatedir}/lib/alsa:g" ${S}/alsa-state-init
install -d ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/alsa-state-init ${D}${sysconfdir}/init.d/alsa-state
+ install -m 0755 ${S}/alsa-state-init ${D}${sysconfdir}/init.d/alsa-state
fi
install -d ${D}/${localstatedir}/lib/alsa
install -d ${D}${sysconfdir}
- install -m 0644 ${WORKDIR}/asound.conf ${D}${sysconfdir}
- install -m 0644 ${WORKDIR}/*.state ${D}${localstatedir}/lib/alsa
+ install -m 0644 ${S}/asound.conf ${D}${sysconfdir}
+ install -m 0644 ${S}/*.state ${D}${localstatedir}/lib/alsa
}
PACKAGES += "alsa-states"
@@ -31,7 +31,7 @@ do_install () {
# THe ulitity this script provides could be achieved by systemd-vconsole-setup.service
if ${@bb.utils.contains('DISTRO_FEATURES','sysvinit','true','false',d)}; then
install -d ${D}${sysconfdir}/init.d/
- install -m 0755 ${WORKDIR}/keymap.sh ${D}${sysconfdir}/init.d/
+ install -m 0755 ${S}/keymap.sh ${D}${sysconfdir}/init.d/
fi
}
@@ -5,7 +5,7 @@ same wire, at higher speeds than most Wifi connections."
HOMEPAGE = "http://linux-sunxi.org/USB_Gadget/Ethernet"
LICENSE = "GPL-2.0-only"
-LIC_FILES_CHKSUM = "file://${WORKDIR}/COPYING.GPL;md5=751419260aa954499f7abaabaa882bbe"
+LIC_FILES_CHKSUM = "file://${S}/COPYING.GPL;md5=751419260aa954499f7abaabaa882bbe"
SRC_URI = "file://usb-gether \
@@ -15,10 +15,10 @@ S = "${WORKDIR}"
do_install() {
install -d ${D}${sysconfdir}/ppp/peers
- install -m 0644 ${WORKDIR}/host-peer ${D}${sysconfdir}/ppp/peers/host
+ install -m 0644 ${S}/host-peer ${D}${sysconfdir}/ppp/peers/host
install -d ${D}${sbindir}
- install -m 0755 ${WORKDIR}/ppp-dialin ${D}${sbindir}
+ install -m 0755 ${S}/ppp-dialin ${D}${sbindir}
}
USERADD_PACKAGES = "${PN}"
@@ -113,23 +113,23 @@ do_install () {
ln -snf ../run ${D}${localstatedir}/run
ln -snf ../run/lock ${D}${localstatedir}/lock
- install -m 0644 ${WORKDIR}/hosts ${D}${sysconfdir}/hosts
+ install -m 0644 ${S}/hosts ${D}${sysconfdir}/hosts
${BASEFILESISSUEINSTALL}
- rotation=`cat ${WORKDIR}/rotation`
+ rotation=`cat ${S}/rotation`
if [ "$rotation" != "0" ]; then
- install -m 0644 ${WORKDIR}/rotation ${D}${sysconfdir}/rotation
+ install -m 0644 ${S}/rotation ${D}${sysconfdir}/rotation
fi
- install -m 0644 ${WORKDIR}/fstab ${D}${sysconfdir}/fstab
- install -m 0644 ${WORKDIR}/profile ${D}${sysconfdir}/profile
+ install -m 0644 ${S}/fstab ${D}${sysconfdir}/fstab
+ install -m 0644 ${S}/profile ${D}${sysconfdir}/profile
sed -i 's#ROOTHOME#${ROOT_HOME}#' ${D}${sysconfdir}/profile
sed -i 's#@BINDIR@#${bindir}#g' ${D}${sysconfdir}/profile
- install -m 0644 ${WORKDIR}/shells ${D}${sysconfdir}/shells
- install -m 0755 ${WORKDIR}/share/dot.profile ${D}${sysconfdir}/skel/.profile
- install -m 0755 ${WORKDIR}/share/dot.bashrc ${D}${sysconfdir}/skel/.bashrc
- install -m 0644 ${WORKDIR}/host.conf ${D}${sysconfdir}/host.conf
- install -m 0644 ${WORKDIR}/motd ${D}${sysconfdir}/motd
+ install -m 0644 ${S}/shells ${D}${sysconfdir}/shells
+ install -m 0755 ${S}/share/dot.profile ${D}${sysconfdir}/skel/.profile
+ install -m 0755 ${S}/share/dot.bashrc ${D}${sysconfdir}/skel/.bashrc
+ install -m 0644 ${S}/host.conf ${D}${sysconfdir}/host.conf
+ install -m 0644 ${S}/motd ${D}${sysconfdir}/motd
ln -sf /proc/mounts ${D}${sysconfdir}/mtab
@@ -145,12 +145,12 @@ do_install () {
}
do_install:append:libc-glibc () {
- install -m 0644 ${WORKDIR}/nsswitch.conf ${D}${sysconfdir}/nsswitch.conf
+ install -m 0644 ${S}/nsswitch.conf ${D}${sysconfdir}/nsswitch.conf
}
DISTRO_VERSION[vardepsexclude] += "DATE"
do_install_basefilesissue () {
- install -m 644 ${WORKDIR}/issue* ${D}${sysconfdir}
+ install -m 644 ${S}/issue* ${D}${sysconfdir}
if [ -n "${DISTRO_NAME}" ]; then
printf "${DISTRO_NAME} " >> ${D}${sysconfdir}/issue
printf "${DISTRO_NAME} " >> ${D}${sysconfdir}/issue.net
@@ -14,7 +14,7 @@ do_compile() {
do_install() {
install -d ${D}${sysconfdir}
- install -D -m 0644 ${WORKDIR}/inittab ${D}${sysconfdir}/inittab
+ install -D -m 0644 ${S}/inittab ${D}${sysconfdir}/inittab
CONSOLES="${SERIAL_CONSOLES}"
for s in $CONSOLES
@@ -3,7 +3,7 @@ DESCRIPTION = "This package provides high level tools to configure network inter
HOMEPAGE = "http://packages.debian.org/ifupdown"
SECTION = "base"
LICENSE = "GPL-2.0-only"
-LIC_FILES_CHKSUM = "file://${WORKDIR}/copyright;md5=3dd6192d306f582dee7687da3d8748ab"
+LIC_FILES_CHKSUM = "file://${S}/copyright;md5=3dd6192d306f582dee7687da3d8748ab"
inherit update-rc.d
@@ -23,9 +23,9 @@ do_install () {
${D}${sysconfdir}/network/if-up.d \
${D}${sysconfdir}/network/if-down.d \
${D}${sysconfdir}/network/if-post-down.d
- install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/networking
- install -m 0644 ${WORKDIR}/interfaces ${D}${sysconfdir}/network/interfaces
- install -m 0755 ${WORKDIR}/nfsroot ${D}${sysconfdir}/network/if-pre-up.d
+ install -m 0755 ${S}/init ${D}${sysconfdir}/init.d/networking
+ install -m 0644 ${S}/interfaces ${D}${sysconfdir}/network/interfaces
+ install -m 0755 ${S}/nfsroot ${D}${sysconfdir}/network/if-pre-up.d
}
do_install:append:qemuall () {
@@ -7,7 +7,7 @@ SRC_URI = "file://init-boot.sh"
S = "${WORKDIR}"
do_install() {
- install -m 0755 ${WORKDIR}/init-boot.sh ${D}/init
+ install -m 0755 ${S}/init-boot.sh ${D}/init
# Create device nodes expected by some kernels in initramfs
# before even executing /init.
@@ -26,31 +26,31 @@ do_install() {
install -d ${D}/init.d
# base
- install -m 0755 ${WORKDIR}/init ${D}/init
- install -m 0755 ${WORKDIR}/nfsrootfs ${D}/init.d/85-nfsrootfs
- install -m 0755 ${WORKDIR}/rootfs ${D}/init.d/90-rootfs
- install -m 0755 ${WORKDIR}/finish ${D}/init.d/99-finish
+ install -m 0755 ${S}/init ${D}/init
+ install -m 0755 ${S}/nfsrootfs ${D}/init.d/85-nfsrootfs
+ install -m 0755 ${S}/rootfs ${D}/init.d/90-rootfs
+ install -m 0755 ${S}/finish ${D}/init.d/99-finish
# exec
- install -m 0755 ${WORKDIR}/exec ${D}/init.d/89-exec
+ install -m 0755 ${S}/exec ${D}/init.d/89-exec
# mdev
- install -m 0755 ${WORKDIR}/mdev ${D}/init.d/01-mdev
+ install -m 0755 ${S}/mdev ${D}/init.d/01-mdev
# udev
- install -m 0755 ${WORKDIR}/udev ${D}/init.d/01-udev
+ install -m 0755 ${S}/udev ${D}/init.d/01-udev
# e2fs
- install -m 0755 ${WORKDIR}/e2fs ${D}/init.d/10-e2fs
+ install -m 0755 ${S}/e2fs ${D}/init.d/10-e2fs
# debug
- install -m 0755 ${WORKDIR}/debug ${D}/init.d/00-debug
+ install -m 0755 ${S}/debug ${D}/init.d/00-debug
# lvm
- install -m 0755 ${WORKDIR}/lvm ${D}/init.d/09-lvm
+ install -m 0755 ${S}/lvm ${D}/init.d/09-lvm
# overlayroot needs to run after rootfs module but before finish
- install -m 0755 ${WORKDIR}/overlayroot ${D}/init.d/91-overlayroot
+ install -m 0755 ${S}/overlayroot ${D}/init.d/91-overlayroot
# Create device nodes expected by some kernels in initramfs
# before even executing /init.
@@ -9,7 +9,7 @@ SRC_URI = "file://init-live.sh"
S = "${WORKDIR}"
do_install() {
- install -m 0755 ${WORKDIR}/init-live.sh ${D}/init
+ install -m 0755 ${S}/init-live.sh ${D}/init
install -d ${D}/dev
mknod -m 622 ${D}/dev/console c 5 1
}
@@ -9,7 +9,7 @@ SRC_URI = "file://init-live.sh"
S = "${WORKDIR}"
do_install() {
- install -m 0755 ${WORKDIR}/init-live.sh ${D}/init
+ install -m 0755 ${S}/init-live.sh ${D}/init
install -d ${D}/dev
mknod -m 622 ${D}/dev/console c 5 1
}
@@ -8,7 +8,7 @@ RDEPENDS:${PN} = "parted e2fsprogs-mke2fs dosfstools"
S = "${WORKDIR}"
do_install() {
- install -m 0755 ${WORKDIR}/init-install-efi-testfs.sh ${D}/install-efi.sh
+ install -m 0755 ${S}/init-install-efi-testfs.sh ${D}/install-efi.sh
}
INHIBIT_DEFAULT_DEPS = "1"
@@ -10,7 +10,7 @@ RRECOMMENDS:${PN} = "${VIRTUAL-RUNTIME_base-utils-syslog}"
S = "${WORKDIR}"
do_install() {
- install -m 0755 ${WORKDIR}/init-install-efi.sh ${D}/install-efi.sh
+ install -m 0755 ${S}/init-install-efi.sh ${D}/install-efi.sh
}
# While this package maybe an allarch due to it being a
@@ -8,7 +8,7 @@ RDEPENDS:${PN} = "grub parted e2fsprogs-mke2fs"
S = "${WORKDIR}"
do_install() {
- install -m 0755 ${WORKDIR}/init-install-testfs.sh ${D}/install.sh
+ install -m 0755 ${S}/init-install-testfs.sh ${D}/install.sh
}
INHIBIT_DEFAULT_DEPS = "1"
@@ -10,7 +10,7 @@ RDEPENDS:${PN} = "grub parted e2fsprogs-mke2fs util-linux-blkid ${VIRTUAL-RUNTIM
RRECOMMENDS:${PN} = "${VIRTUAL-RUNTIME_base-utils-syslog}"
do_install() {
- install -m 0755 ${WORKDIR}/init-install.sh ${D}/install.sh
+ install -m 0755 ${S}/init-install.sh ${D}/install.sh
}
# While this package maybe an allarch due to it being a
@@ -11,7 +11,7 @@ S = "${WORKDIR}"
do_install() {
install -d ${D}/init.d
- install -m 0755 ${WORKDIR}/init-install-efi.sh ${D}/init.d/install-efi.sh
+ install -m 0755 ${S}/init-install-efi.sh ${D}/init.d/install-efi.sh
}
FILES:${PN} = "/init.d/install-efi.sh"
@@ -16,7 +16,7 @@ S = "${WORKDIR}"
do_install() {
install -d ${D}/init.d
- install -m 0755 ${WORKDIR}/init-install.sh ${D}/init.d/install.sh
+ install -m 0755 ${S}/init-install.sh ${D}/init.d/install.sh
}
FILES:${PN} = "/init.d/install.sh"
@@ -13,7 +13,7 @@ S = "${WORKDIR}"
do_install() {
install -d ${D}/init.d
- install -m 0755 ${WORKDIR}/setup-live ${D}/init.d/80-setup-live
+ install -m 0755 ${S}/setup-live ${D}/init.d/80-setup-live
}
FILES:${PN} = "/init.d/80-setup-live"
@@ -61,9 +61,9 @@ HALTARGS ?= "-d -f"
VARLIBMOUNTARGS ?= ""
do_configure() {
- sed -i -e "s:SED_HALTARGS:${HALTARGS}:g" ${WORKDIR}/halt
- sed -i -e "s:SED_HALTARGS:${HALTARGS}:g" ${WORKDIR}/reboot
- sed -i -e "s:SED_VARLIBMOUNTARGS:${VARLIBMOUNTARGS}:g" ${WORKDIR}/read-only-rootfs-hook.sh
+ sed -i -e "s:SED_HALTARGS:${HALTARGS}:g" ${S}/halt
+ sed -i -e "s:SED_HALTARGS:${HALTARGS}:g" ${S}/reboot
+ sed -i -e "s:SED_VARLIBMOUNTARGS:${VARLIBMOUNTARGS}:g" ${S}/read-only-rootfs-hook.sh
}
do_install () {
@@ -84,27 +84,27 @@ do_install () {
# Holds state information pertaining to urandom
install -d ${D}${localstatedir}/lib/urandom
- install -m 0644 ${WORKDIR}/functions ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/bootmisc.sh ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/checkroot.sh ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/halt ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/hostname.sh ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/mountall.sh ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/mountnfs.sh ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/reboot ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/rmnologin.sh ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/sendsigs ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/single ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/umountnfs.sh ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/urandom ${D}${sysconfdir}/init.d
+ install -m 0644 ${S}/functions ${D}${sysconfdir}/init.d
+ install -m 0755 ${S}/bootmisc.sh ${D}${sysconfdir}/init.d
+ install -m 0755 ${S}/checkroot.sh ${D}${sysconfdir}/init.d
+ install -m 0755 ${S}/halt ${D}${sysconfdir}/init.d
+ install -m 0755 ${S}/hostname.sh ${D}${sysconfdir}/init.d
+ install -m 0755 ${S}/mountall.sh ${D}${sysconfdir}/init.d
+ install -m 0755 ${S}/mountnfs.sh ${D}${sysconfdir}/init.d
+ install -m 0755 ${S}/reboot ${D}${sysconfdir}/init.d
+ install -m 0755 ${S}/rmnologin.sh ${D}${sysconfdir}/init.d
+ install -m 0755 ${S}/sendsigs ${D}${sysconfdir}/init.d
+ install -m 0755 ${S}/single ${D}${sysconfdir}/init.d
+ install -m 0755 ${S}/umountnfs.sh ${D}${sysconfdir}/init.d
+ install -m 0755 ${S}/urandom ${D}${sysconfdir}/init.d
sed -i ${D}${sysconfdir}/init.d/urandom -e 's,/var/,${localstatedir}/,g;s,/etc/,${sysconfdir}/,g'
- install -m 0755 ${WORKDIR}/devpts.sh ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/devpts ${D}${sysconfdir}/default
- install -m 0755 ${WORKDIR}/sysfs.sh ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/populate-volatile.sh ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/read-only-rootfs-hook.sh ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/save-rtc.sh ${D}${sysconfdir}/init.d
- install -m 0644 ${WORKDIR}/volatiles ${D}${sysconfdir}/default/volatiles/00_core
+ install -m 0755 ${S}/devpts.sh ${D}${sysconfdir}/init.d
+ install -m 0755 ${S}/devpts ${D}${sysconfdir}/default
+ install -m 0755 ${S}/sysfs.sh ${D}${sysconfdir}/init.d
+ install -m 0755 ${S}/populate-volatile.sh ${D}${sysconfdir}/init.d
+ install -m 0755 ${S}/read-only-rootfs-hook.sh ${D}${sysconfdir}/init.d
+ install -m 0755 ${S}/save-rtc.sh ${D}${sysconfdir}/init.d
+ install -m 0644 ${S}/volatiles ${D}${sysconfdir}/default/volatiles/00_core
if [ ${@ oe.types.boolean('${VOLATILE_LOG_DIR}') } = True ]; then
sed -i -e '\@^d root root 0755 /var/volatile/log none$@ a\l root root 0755 /var/log /var/volatile/log' \
${D}${sysconfdir}/default/volatiles/00_core
@@ -112,22 +112,22 @@ do_install () {
if [ "${VOLATILE_TMP_DIR}" != "yes" ]; then
sed -i -e "/\<tmp\>/d" ${D}${sysconfdir}/default/volatiles/00_core
fi
- install -m 0755 ${WORKDIR}/dmesg.sh ${D}${sysconfdir}/init.d
- install -m 0644 ${WORKDIR}/logrotate-dmesg.conf ${D}${sysconfdir}/
+ install -m 0755 ${S}/dmesg.sh ${D}${sysconfdir}/init.d
+ install -m 0644 ${S}/logrotate-dmesg.conf ${D}${sysconfdir}/
if [ "${TARGET_ARCH}" = "arm" ]; then
- install -m 0755 ${WORKDIR}/alignment.sh ${D}${sysconfdir}/init.d
+ install -m 0755 ${S}/alignment.sh ${D}${sysconfdir}/init.d
fi
if ${@bb.utils.contains('DISTRO_FEATURES','selinux','true','false',d)}; then
install -d ${D}/${base_sbindir}
- install -m 0755 ${WORKDIR}/sushell ${D}/${base_sbindir}
+ install -m 0755 ${S}/sushell ${D}/${base_sbindir}
fi
#
# Install device dependent scripts
#
- install -m 0755 ${WORKDIR}/banner.sh ${D}${sysconfdir}/init.d/banner.sh
- install -m 0755 ${WORKDIR}/umountfs ${D}${sysconfdir}/init.d/umountfs
+ install -m 0755 ${S}/banner.sh ${D}${sysconfdir}/init.d/banner.sh
+ install -m 0755 ${S}/umountfs ${D}${sysconfdir}/init.d/umountfs
#
# Create runlevel links
#
@@ -21,7 +21,7 @@ do_install() {
default_baudrate=`echo "${SERIAL_CONSOLES}" | sed 's/\;.*//'`
install -d ${D}${systemd_system_unitdir}/
install -d ${D}${sysconfdir}/systemd/system/getty.target.wants/
- install -m 0644 ${WORKDIR}/serial-getty@.service ${D}${systemd_system_unitdir}/
+ install -m 0644 ${S}/serial-getty@.service ${D}${systemd_system_unitdir}/
sed -i -e "s/\@BAUDRATE\@/$default_baudrate/g" ${D}${systemd_system_unitdir}/serial-getty@.service
sed -i -e "s/\@TERM\@/${SERIAL_TERM}/g" ${D}${systemd_system_unitdir}/serial-getty@.service
@@ -35,7 +35,7 @@ do_install() {
${D}${sysconfdir}/systemd/system/getty.target.wants/serial-getty@$ttydev.service
else
# install custom service file for the non-default baudrate
- install -m 0644 ${WORKDIR}/serial-getty@.service ${D}${systemd_system_unitdir}/serial-getty$baudrate@.service
+ install -m 0644 ${S}/serial-getty@.service ${D}${systemd_system_unitdir}/serial-getty$baudrate@.service
sed -i -e "s/\@BAUDRATE\@/$baudrate/g" ${D}${systemd_system_unitdir}/serial-getty$baudrate@.service
# enable the service
ln -sf ${systemd_system_unitdir}/serial-getty$baudrate@.service \
@@ -12,5 +12,5 @@ S = "${WORKDIR}"
do_install() {
install -d ${D}${bindir}
- install -m 0755 ${WORKDIR}/systemctl ${D}${bindir}
+ install -m 0755 ${S}/systemctl ${D}${bindir}
}
@@ -16,9 +16,9 @@ do_compile() {
do_install() {
install -d ${D}${sysconfdir}
- install -m 0644 ${WORKDIR}/inittab ${D}${sysconfdir}/inittab
+ install -m 0644 ${S}/inittab ${D}${sysconfdir}/inittab
install -d ${D}${base_bindir}
- install -m 0755 ${WORKDIR}/start_getty ${D}${base_bindir}/start_getty
+ install -m 0755 ${S}/start_getty ${D}${base_bindir}/start_getty
sed -e 's,/usr/bin,${bindir},g' -i ${D}${base_bindir}/start_getty
CONSOLES="${SERIAL_CONSOLES}"
@@ -20,21 +20,21 @@ MOUNT_BASE = "/run/media"
do_install() {
install -d ${D}${sysconfdir}/udev/rules.d
- install -m 0644 ${WORKDIR}/automount.rules ${D}${sysconfdir}/udev/rules.d/automount.rules
- install -m 0644 ${WORKDIR}/autonet.rules ${D}${sysconfdir}/udev/rules.d/autonet.rules
- install -m 0644 ${WORKDIR}/localextra.rules ${D}${sysconfdir}/udev/rules.d/localextra.rules
+ install -m 0644 ${S}/automount.rules ${D}${sysconfdir}/udev/rules.d/automount.rules
+ install -m 0644 ${S}/autonet.rules ${D}${sysconfdir}/udev/rules.d/autonet.rules
+ install -m 0644 ${S}/localextra.rules ${D}${sysconfdir}/udev/rules.d/localextra.rules
install -d ${D}${sysconfdir}/udev/mount.ignorelist.d
- install -m 0644 ${WORKDIR}/mount.ignorelist ${D}${sysconfdir}/udev/
+ install -m 0644 ${S}/mount.ignorelist ${D}${sysconfdir}/udev/
install -d ${D}${sysconfdir}/udev/scripts/
- install -m 0755 ${WORKDIR}/mount.sh ${D}${sysconfdir}/udev/scripts/mount.sh
+ install -m 0755 ${S}/mount.sh ${D}${sysconfdir}/udev/scripts/mount.sh
sed -i 's|@systemd_unitdir@|${systemd_unitdir}|g' ${D}${sysconfdir}/udev/scripts/mount.sh
sed -i 's|@base_sbindir@|${base_sbindir}|g' ${D}${sysconfdir}/udev/scripts/mount.sh
sed -i 's|@MOUNT_BASE@|${MOUNT_BASE}|g' ${D}${sysconfdir}/udev/scripts/mount.sh
- install -m 0755 ${WORKDIR}/network.sh ${D}${sysconfdir}/udev/scripts
+ install -m 0755 ${S}/network.sh ${D}${sysconfdir}/udev/scripts
}
pkg_postinst:${PN} () {
@@ -8,7 +8,7 @@ HOMEPAGE = "https://docbook.org"
# upgrading this recipe, please verify whether this is still needed.
LICENSE = "OASIS"
-LIC_FILES_CHKSUM = "file://${WORKDIR}/LICENSE-OASIS;md5=c608985dd5f7f215e669e7639a0b1d2e"
+LIC_FILES_CHKSUM = "file://${S}/LICENSE-OASIS;md5=c608985dd5f7f215e669e7639a0b1d2e"
# To support apps with xml schema backward compatibility, we must
# install a set of schemas. Install the latest based on PV and then
@@ -30,7 +30,7 @@ S = "${WORKDIR}"
do_install() {
install -d ${D}/${bindir}
- install -m 0755 ${WORKDIR}/icecc-create-env ${D}/${bindir}
+ install -m 0755 ${S}/icecc-create-env ${D}/${bindir}
}
BBCLASSEXTEND = "native nativesdk"
@@ -28,6 +28,6 @@ do_compile() {
do_install() {
install -d ${D}${bindir}
- install -m 0755 ${WORKDIR}${COREBASE}/scripts/oe-* ${D}${bindir}/
- install -m 0755 ${WORKDIR}${COREBASE}/scripts/runqemu* ${D}${bindir}/
+ install -m 0755 ${S}${COREBASE}/scripts/oe-* ${D}${bindir}/
+ install -m 0755 ${S}${COREBASE}/scripts/runqemu* ${D}${bindir}/
}
@@ -2,7 +2,7 @@ SUMMARY = "Helper utilities needed by the runqemu script"
LICENSE = "GPL-2.0-only"
RDEPENDS:${PN} = "qemu-system-native"
-LIC_FILES_CHKSUM = "file://${WORKDIR}/qemu-oe-bridge-helper.c;endline=4;md5=ae00a3bab86f2caaa8462eacda77f4d7"
+LIC_FILES_CHKSUM = "file://${S}/qemu-oe-bridge-helper.c;endline=4;md5=ae00a3bab86f2caaa8462eacda77f4d7"
SRC_URI = "file://qemu-oe-bridge-helper.c"
@@ -29,13 +29,13 @@ do_compile () {
do_install() {
install -d ${D}${sbindir}
- install -m 0755 ${WORKDIR}/run-postinsts ${D}${sbindir}/
+ install -m 0755 ${S}/run-postinsts ${D}${sbindir}/
install -d ${D}${sysconfdir}/init.d/
- install -m 0755 ${WORKDIR}/run-postinsts.init ${D}${sysconfdir}/init.d/run-postinsts
+ install -m 0755 ${S}/run-postinsts.init ${D}${sysconfdir}/init.d/run-postinsts
install -d ${D}${systemd_system_unitdir}/
- install -m 0644 ${WORKDIR}/run-postinsts.service ${D}${systemd_system_unitdir}/
+ install -m 0644 ${S}/run-postinsts.service ${D}${systemd_system_unitdir}/
sed -i -e 's:#SYSCONFDIR#:${sysconfdir}:g' \
-e 's:#SBINDIR#:${sbindir}:g' \
@@ -46,7 +46,7 @@ do_install () {
# where the context is easier to do the env maniupations needed
install -d ${SYS_BINDIR}
outfile="${SYS_BINDIR}/target-rust-ccld"
- ${CC} ${WORKDIR}/target-rust-ccld.c -o $outfile
+ ${CC} ${S}/target-rust-ccld.c -o $outfile
chmod +x "$outfile"
create_sdk_wrapper "${SYS_BINDIR}/target-rust-ccld-wrapper" "CC"
@@ -17,7 +17,7 @@ do_install () {
# Ensure we add a suitable securetty file to the package that has
# most common embedded TTYs defined.
install -d ${D}${sysconfdir}
- install -m 0400 ${WORKDIR}/securetty ${D}${sysconfdir}/securetty
+ install -m 0400 ${S}/securetty ${D}${sysconfdir}/securetty
if [ ! -z "${SERIAL_CONSOLES}" ]; then
# Our SERIAL_CONSOLES contains a baud rate and sometimes extra
# options as well. The following pearl :) takes that and converts
@@ -29,18 +29,18 @@ DEFAULTBACKEND:qemuall ?= "drm"
do_install() {
# Install weston-start script
if [ "${VIRTUAL-RUNTIME_init_manager}" != "systemd" ]; then
- install -Dm755 ${WORKDIR}/weston-start ${D}${bindir}/weston-start
+ install -Dm755 ${S}/weston-start ${D}${bindir}/weston-start
sed -i 's,@DATADIR@,${datadir},g' ${D}${bindir}/weston-start
sed -i 's,@LOCALSTATEDIR@,${localstatedir},g' ${D}${bindir}/weston-start
- install -Dm755 ${WORKDIR}/init ${D}/${sysconfdir}/init.d/weston
+ install -Dm755 ${S}/init ${D}/${sysconfdir}/init.d/weston
sed -i 's#ROOTHOME#${ROOT_HOME}#' ${D}/${sysconfdir}/init.d/weston
fi
# Install Weston systemd service
if ${@bb.utils.contains('DISTRO_FEATURES','systemd','true','false',d)}; then
- install -D -p -m0644 ${WORKDIR}/weston.service ${D}${systemd_system_unitdir}/weston.service
- install -D -p -m0644 ${WORKDIR}/weston.socket ${D}${systemd_system_unitdir}/weston.socket
- install -D -p -m0644 ${WORKDIR}/weston-socket.sh ${D}${sysconfdir}/profile.d/weston-socket.sh
+ install -D -p -m0644 ${S}/weston.service ${D}${systemd_system_unitdir}/weston.service
+ install -D -p -m0644 ${S}/weston.socket ${D}${systemd_system_unitdir}/weston.socket
+ install -D -p -m0644 ${S}/weston-socket.sh ${D}${sysconfdir}/profile.d/weston-socket.sh
sed -i -e s:/etc:${sysconfdir}:g \
-e s:/usr/bin:${bindir}:g \
-e s:/var:${localstatedir}:g \
@@ -48,11 +48,11 @@ do_install() {
fi
if [ "${@bb.utils.filter('DISTRO_FEATURES', 'pam', d)}" ]; then
- install -D -p -m0644 ${WORKDIR}/weston-autologin ${D}${sysconfdir}/pam.d/weston-autologin
+ install -D -p -m0644 ${S}/weston-autologin ${D}${sysconfdir}/pam.d/weston-autologin
fi
- install -D -p -m0644 ${WORKDIR}/weston.ini ${D}${sysconfdir}/xdg/weston/weston.ini
- install -Dm644 ${WORKDIR}/weston.env ${D}${sysconfdir}/default/weston
+ install -D -p -m0644 ${S}/weston.ini ${D}${sysconfdir}/xdg/weston/weston.ini
+ install -Dm644 ${S}/weston.env ${D}${sysconfdir}/default/weston
if [ -n "${DEFAULTBACKEND}" ]; then
sed -i -e "/^\[core\]/a backend=${DEFAULTBACKEND}-backend.so" ${D}${sysconfdir}/xdg/weston/weston.ini
@@ -52,7 +52,7 @@ do_install() {
if ${@bb.utils.contains('DISTRO_FEATURES','systemd','true','false',d)}; then
install -d ${D}${systemd_system_unitdir}
- install -m 0644 ${WORKDIR}/xserver-nodm.service.in ${D}${systemd_system_unitdir}/xserver-nodm.service
+ install -m 0644 ${S}/xserver-nodm.service.in ${D}${systemd_system_unitdir}/xserver-nodm.service
sed -i "s:@USER@:${XUSER}:" ${D}${systemd_system_unitdir}/xserver-nodm.service
fi
@@ -14,8 +14,8 @@ PACKAGE_ARCH = "${MACHINE_ARCH}"
ALLOW_EMPTY:${PN} = "1"
do_install () {
- if test -s ${WORKDIR}/xorg.conf; then
+ if test -s ${S}/xorg.conf; then
install -d ${D}/${sysconfdir}/X11
- install -m 0644 ${WORKDIR}/xorg.conf ${D}/${sysconfdir}/X11/
+ install -m 0644 ${S}/xorg.conf ${D}/${sysconfdir}/X11/
fi
}
@@ -17,7 +17,7 @@ do_compile () {
do_install () {
install -d ${D}${sysconfdir}/init.d/
- install -m 0755 ${WORKDIR}/modutils.sh ${D}${sysconfdir}/init.d/
+ install -m 0755 ${S}/modutils.sh ${D}${sysconfdir}/init.d/
}
PACKAGE_WRITE_DEPS:append = " ${@bb.utils.contains('DISTRO_FEATURES','systemd','systemd-systemctl-native','',d)}"
Where recipes use S = ${WORKDIR}, ensure they are referencing ${S} correctly to access files as soon we want to stop doing this in WORKDIR at which point they would break unless corrected. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> --- .../selftest-hardlink/selftest-hardlink.bb | 2 +- meta/recipes-bsp/alsa-state/alsa-state.bb | 8 +-- meta/recipes-bsp/keymaps/keymaps_1.0.bb | 2 +- meta/recipes-bsp/usbinit/usbinit.bb | 2 +- .../ppp-dialin/ppp-dialin_0.1.bb | 4 +- .../base-files/base-files_3.0.14.bb | 24 ++++---- .../busybox/busybox-inittab_1.36.1.bb | 2 +- .../init-ifupdown/init-ifupdown_1.0.bb | 8 +-- .../initrdscripts/initramfs-boot_1.0.bb | 2 +- .../initrdscripts/initramfs-framework_1.0.bb | 22 +++---- .../initramfs-live-boot-tiny_1.0.bb | 2 +- .../initrdscripts/initramfs-live-boot_1.0.bb | 2 +- .../initramfs-live-install-efi-testfs_1.0.bb | 2 +- .../initramfs-live-install-efi_1.0.bb | 2 +- .../initramfs-live-install-testfs_1.0.bb | 2 +- .../initramfs-live-install_1.0.bb | 2 +- .../initramfs-module-install-efi_1.0.bb | 2 +- .../initramfs-module-install_1.0.bb | 2 +- .../initramfs-module-setup-live_1.0.bb | 2 +- .../initscripts/initscripts_1.0.bb | 58 +++++++++---------- .../systemd/systemd-serialgetty.bb | 4 +- .../systemd/systemd-systemctl-native.bb | 2 +- .../sysvinit/sysvinit-inittab_2.88dsf.bb | 4 +- meta/recipes-core/udev/udev-extraconf_1.1.bb | 12 ++-- .../docbook-xml/docbook-xml-dtd4_4.5.bb | 2 +- .../icecc-create-env/icecc-create-env_0.1.bb | 2 +- .../qemu/nativesdk-qemu-helper_1.0.bb | 4 +- .../qemu/qemu-helper-native_1.0.bb | 2 +- .../run-postinsts/run-postinsts_1.0.bb | 6 +- .../rust/rust-cross-canadian.inc | 2 +- .../shadow/shadow-securetty_4.6.bb | 2 +- meta/recipes-graphics/wayland/weston-init.bb | 16 ++--- .../x11-common/xserver-nodm-init_3.0.bb | 2 +- .../xorg-xserver/xserver-xf86-config_0.1.bb | 4 +- .../modutils-initscripts.bb | 2 +- 35 files changed, 109 insertions(+), 109 deletions(-)