new file mode 100644
@@ -0,0 +1,59 @@
+# Xserver explains what the short codes mean
+(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
+
+# Xserver warns if compiled with ACPI but no acpid running
+Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
+
+# Some machines (eg qemux86) don't enable PAE (they probably should though)
+NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
+
+# Connman's pacrunner warns if external connectivity isn't available
+Failed to find URL:http://ipv4.connman.net/online/status.html
+Failed to find URL:http://ipv6.connman.net/online/status.html
+
+# These should be reviewed to see if they are still needed
+dma timeout
+can\'t add hid device:
+usbhid: probe of
+_OSC failed (AE_ERROR)
+_OSC failed (AE_SUPPORT)
+AE_ALREADY_EXISTS
+ACPI _OSC request failed (AE_SUPPORT)
+can\'t disable ASPM
+Failed to load module "vesa"
+Failed to load module "modesetting"
+Failed to load module "glx"
+Failed to load module "fbdev"
+Failed to load module "ati"
+[drm] Cannot find any crtc or sizes
+_OSC failed (AE_NOT_FOUND); disabling ASPM
+hd.: possibly failed opcode
+NETLINK INITIALIZATION FAILED
+kernel: Cannot find map file
+omap_hwmod: debugss: _wait_target_disable failed
+VGA arbiter: cannot open kernel arbiter, no multi-card support
+Online check failed for
+netlink init failed
+Fast TSC calibration
+controller can't do DEVSLP, turning off
+stmmac_dvr_probe: warning: cannot get CSR clock
+error: couldn\'t mount because of unsupported optional features
+GPT: Use GNU Parted to correct GPT errors
+Cannot set xattr user.Librepo.DownloadInProgress
+Failed to read /var/lib/nfs/statd/state: Success
+error retry time-out =
+logind: cannot setup systemd-logind helper (-61), using legacy fallback
+Failed to rename network interface
+Failed to process device, ignoring: Device or resource busy
+Cannot find a map file
+[rdrand]: Initialization Failed
+[rndr ]: Initialization Failed
+[pulseaudio] authkey.c: Failed to open cookie file
+[pulseaudio] authkey.c: Failed to load authentication key
+was skipped because of a failed condition check
+was skipped because all trigger condition checks failed
+xf86OpenConsole: Switching VT failed
+Failed to read LoaderConfigTimeoutOneShot variable, ignoring: Operation not supported
+Failed to read LoaderEntryOneShot variable, ignoring: Operation not supported
+Direct firmware load for regulatory.db
+failed to load regulatory.db
new file mode 100644
@@ -0,0 +1,2 @@
+# These should be reviewed to see if they are still needed
+cacheinfo: Failed to find cpu0 device node
new file mode 100644
@@ -0,0 +1,27 @@
+# psplash
+FBIOPUT_VSCREENINFO failed, double buffering disabled
+
+# PCI host bridge to bus 0000:00
+# pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
+# pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff]
+# pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
+# pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000
+# pci 0000:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
+# pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
+# pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
+# pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
+# pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size)
+# pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size)
+invalid BAR (can't size)
+
+# These should be reviewed to see if they are still needed
+wrong ELF class
+fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge
+can't claim BAR
+amd_nb: Cannot enumerate AMD northbridges
+tsc: HPET/PMTIMER calibration failed
+modeset(0): Failed to initialize the DRI2 extension
+glamor initialization failed
+blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ)
+floppy: error
+failed to IDENTIFY (I/O error, err_mask=0x4)
new file mode 100644
@@ -0,0 +1,6 @@
+# These should be reviewed to see if they are still needed
+Fatal server error:
+(EE) Server terminated with error (1). Closing log file.
+dmi: Firmware registration failed.
+irq: type mismatch, failed to map hwirq-27 for /intc
+logind: failed to get session seat
\ No newline at end of file
new file mode 100644
@@ -0,0 +1,15 @@
+# These should be reviewed to see if they are still needed
+mmci-pl18x: probe of fpga:05 failed with error -22
+mmci-pl18x: probe of fpga:0b failed with error -22
+OF: amba_device_add() failed (-19) for /amba/smc@10100000
+OF: amba_device_add() failed (-19) for /amba/mpmc@10110000
+OF: amba_device_add() failed (-19) for /amba/sctl@101e0000
+OF: amba_device_add() failed (-19) for /amba/watchdog@101e1000
+OF: amba_device_add() failed (-19) for /amba/sci@101f0000
+OF: amba_device_add() failed (-19) for /amba/spi@101f4000
+OF: amba_device_add() failed (-19) for /amba/ssp@101f4000
+OF: amba_device_add() failed (-19) for /amba/fpga/sci@a000
+Failed to initialize '/amba/timer@101e3000': -22
+jitterentropy: Initialization failed with host not compliant with requirements: 2
+clcd-pl11x: probe of 10120000.display failed with error -2
+arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found
\ No newline at end of file
new file mode 100644
@@ -0,0 +1,6 @@
+# These should be reviewed to see if they are still needed
+PCI 0000:00 Cannot reserve Legacy IO [io 0x0000-0x0fff]
+host side 80-wire cable detection failed, limiting max speed
+mode "640x480" test failed
+can't handle BAR above 4GB
+Cannot reserve Legacy IO
\ No newline at end of file
new file mode 100644
@@ -0,0 +1,4 @@
+# These should be reviewed to see if they are still needed
+vio vio: uevent: failed to send synthetic uevent
+synth uevent: /devices/vio: failed to send uevent
+PCI 0000:00 Cannot reserve Legacy IO [io 0x10000-0x10fff]
\ No newline at end of file
new file mode 100644
@@ -0,0 +1,2 @@
+# These should be reviewed to see if they are still needed
+Failed to access perfctr msr (MSR
new file mode 100644
@@ -0,0 +1,10 @@
+# These should be reviewed to see if they are still needed
+[drm:psb_do_init] *ERROR* Debug is
+wrong ELF class
+Could not enable PowerButton event
+probe of LNXPWRBN:00 failed with error -22
+pmd_set_huge: Cannot satisfy
+failed to setup card detect gpio
+amd_nb: Cannot enumerate AMD northbridges
+failed to retrieve link info, disabling eDP
+Direct firmware load for iwlwifi
new file mode 120000
@@ -0,0 +1 @@
+parselogs-ignores-x86.txt
\ No newline at end of file
@@ -12,186 +12,6 @@ from shutil import rmtree
from oeqa.runtime.case import OERuntimeTestCase
from oeqa.core.decorator.depends import OETestDepends
-common_errors = [
- "(WW) warning, (EE) error, (NI) not implemented, (??) unknown.",
- "dma timeout",
- "can\'t add hid device:",
- "usbhid: probe of ",
- "_OSC failed (AE_ERROR)",
- "_OSC failed (AE_SUPPORT)",
- "AE_ALREADY_EXISTS",
- "ACPI _OSC request failed (AE_SUPPORT)",
- "can\'t disable ASPM",
- "Failed to load module \"vesa\"",
- "Failed to load module vesa",
- "Failed to load module \"modesetting\"",
- "Failed to load module modesetting",
- "Failed to load module \"glx\"",
- "Failed to load module \"fbdev\"",
- "Failed to load module fbdev",
- "Failed to load module glx",
- "[drm] Cannot find any crtc or sizes",
- "_OSC failed (AE_NOT_FOUND); disabling ASPM",
- "Open ACPI failed (/var/run/acpid.socket) (No such file or directory)",
- "NX (Execute Disable) protection cannot be enabled: non-PAE kernel!",
- "hd.: possibly failed opcode",
- 'NETLINK INITIALIZATION FAILED',
- 'kernel: Cannot find map file',
- 'omap_hwmod: debugss: _wait_target_disable failed',
- 'VGA arbiter: cannot open kernel arbiter, no multi-card support',
- 'Failed to find URL:http://ipv4.connman.net/online/status.html',
- 'Online check failed for',
- 'netlink init failed',
- 'Fast TSC calibration',
- "BAR 0-9",
- "Failed to load module \"ati\"",
- "controller can't do DEVSLP, turning off",
- "stmmac_dvr_probe: warning: cannot get CSR clock",
- "error: couldn\'t mount because of unsupported optional features",
- "GPT: Use GNU Parted to correct GPT errors",
- "Cannot set xattr user.Librepo.DownloadInProgress",
- "Failed to read /var/lib/nfs/statd/state: Success",
- "error retry time-out =",
- "logind: cannot setup systemd-logind helper (-61), using legacy fallback",
- "Failed to rename network interface",
- "Failed to process device, ignoring: Device or resource busy",
- "Cannot find a map file",
- "[rdrand]: Initialization Failed",
- "[rndr ]: Initialization Failed",
- "[pulseaudio] authkey.c: Failed to open cookie file",
- "[pulseaudio] authkey.c: Failed to load authentication key",
- "was skipped because of a failed condition check",
- "was skipped because all trigger condition checks failed",
- "xf86OpenConsole: Switching VT failed",
- "Failed to read LoaderConfigTimeoutOneShot variable, ignoring: Operation not supported",
- "Failed to read LoaderEntryOneShot variable, ignoring: Operation not supported",
- "invalid BAR (can't size)",
- ]
-
-x86_common = [
- '[drm:psb_do_init] *ERROR* Debug is',
- 'wrong ELF class',
- 'Could not enable PowerButton event',
- 'probe of LNXPWRBN:00 failed with error -22',
- 'pmd_set_huge: Cannot satisfy',
- 'failed to setup card detect gpio',
- 'amd_nb: Cannot enumerate AMD northbridges',
- 'failed to retrieve link info, disabling eDP',
- 'Direct firmware load for iwlwifi',
- 'Direct firmware load for regulatory.db',
- 'failed to load regulatory.db',
-] + common_errors
-
-qemux86_common = [
- 'wrong ELF class',
- "fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.",
- "can't claim BAR ",
- 'amd_nb: Cannot enumerate AMD northbridges',
- 'tsc: HPET/PMTIMER calibration failed',
- "modeset(0): Failed to initialize the DRI2 extension",
- "glamor initialization failed",
- "blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ)",
- "floppy: error",
- 'failed to IDENTIFY (I/O error, err_mask=0x4)',
-] + common_errors
-
-ignore_errors = {
- 'default' : common_errors,
- 'qemux86' : [
- 'Failed to access perfctr msr (MSR',
- ] + qemux86_common,
- 'qemux86-64' : qemux86_common,
- 'qemumips' : [
- 'Failed to load module "glx"',
- 'cacheinfo: Failed to find cpu0 device node',
- ] + common_errors,
- 'qemumips64' : [
- 'cacheinfo: Failed to find cpu0 device node',
- ] + common_errors,
- 'qemuppc' : [
- 'PCI 0000:00 Cannot reserve Legacy IO [io 0x0000-0x0fff]',
- 'host side 80-wire cable detection failed, limiting max speed',
- 'mode "640x480" test failed',
- 'Failed to load module "glx"',
- 'can\'t handle BAR above 4GB',
- 'Cannot reserve Legacy IO',
- ] + common_errors,
- 'qemuppc64' : [
- 'vio vio: uevent: failed to send synthetic uevent',
- 'synth uevent: /devices/vio: failed to send uevent',
- 'PCI 0000:00 Cannot reserve Legacy IO [io 0x10000-0x10fff]',
- ] + common_errors,
- 'qemuarmv5' : [
- 'mmci-pl18x: probe of fpga:05 failed with error -22',
- 'mmci-pl18x: probe of fpga:0b failed with error -22',
- 'Failed to load module "glx"',
- 'OF: amba_device_add() failed (-19) for /amba/smc@10100000',
- 'OF: amba_device_add() failed (-19) for /amba/mpmc@10110000',
- 'OF: amba_device_add() failed (-19) for /amba/sctl@101e0000',
- 'OF: amba_device_add() failed (-19) for /amba/watchdog@101e1000',
- 'OF: amba_device_add() failed (-19) for /amba/sci@101f0000',
- 'OF: amba_device_add() failed (-19) for /amba/spi@101f4000',
- 'OF: amba_device_add() failed (-19) for /amba/ssp@101f4000',
- 'OF: amba_device_add() failed (-19) for /amba/fpga/sci@a000',
- 'Failed to initialize \'/amba/timer@101e3000\': -22',
- 'jitterentropy: Initialization failed with host not compliant with requirements: 2',
- 'clcd-pl11x: probe of 10120000.display failed with error -2',
- 'arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found'
- ] + common_errors,
- 'qemuarm64' : [
- 'Fatal server error:',
- '(EE) Server terminated with error (1). Closing log file.',
- 'dmi: Firmware registration failed.',
- 'irq: type mismatch, failed to map hwirq-27 for /intc',
- 'logind: failed to get session seat',
- ] + common_errors,
- 'intel-core2-32' : [
- 'ACPI: No _BQC method, cannot determine initial brightness',
- '[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness',
- '(EE) Failed to load module "psb"',
- '(EE) Failed to load module psb',
- '(EE) Failed to load module "psbdrv"',
- '(EE) Failed to load module psbdrv',
- '(EE) open /dev/fb0: No such file or directory',
- '(EE) AIGLX: reverting to software rendering',
- 'dmi: Firmware registration failed.',
- 'ioremap error for 0x78',
- ] + x86_common,
- 'intel-corei7-64' : [
- 'can\'t set Max Payload Size to 256',
- 'intel_punit_ipc: can\'t request region for resource',
- '[drm] parse error at position 4 in video mode \'efifb\'',
- 'ACPI Error: Could not enable RealTimeClock event',
- 'ACPI Warning: Could not enable fixed event - RealTimeClock',
- 'hci_intel INT33E1:00: Unable to retrieve gpio',
- 'hci_intel: probe of INT33E1:00 failed',
- 'can\'t derive routing for PCI INT A',
- 'failed to read out thermal zone',
- 'Bluetooth: hci0: Setting Intel event mask failed',
- 'ttyS2 - failed to request DMA',
- 'Bluetooth: hci0: Failed to send firmware data (-38)',
- 'atkbd serio0: Failed to enable keyboard on isa0060/serio0',
- ] + x86_common,
- 'genericx86' : x86_common,
- 'genericx86-64' : [
- 'Direct firmware load for i915',
- 'Failed to load firmware i915',
- 'Failed to fetch GuC',
- 'Failed to initialize GuC',
- 'Failed to load DMC firmware',
- 'The driver is built-in, so to load the firmware you need to',
- ] + x86_common,
- 'beaglebone-yocto' : [
- 'Direct firmware load for regulatory.db',
- 'failed to load regulatory.db',
- 'l4_wkup_cm',
- 'Failed to load module "glx"',
- 'Failed to make EGL context current',
- 'glamor initialization failed',
- ] + common_errors,
-}
-
-
# importlib.resources.open_text in Python <3.10 doesn't search all directories
# when a package is split across multiple directories. Until we can rely on
# 3.10+, reimplement the searching logic.