Patchwork [meta-fsl-ppc,5/6] libvirt: add bbappend for qoriq-ppc customizations

login
register
mail settings
Submitter Ting Liu
Date July 24, 2014, 7:48 a.m.
Message ID <1406188097-6533-5-git-send-email-ting.liu@freescale.com>
Download mbox | patch
Permalink /patch/76557/
State Accepted
Headers show

Comments

Ting Liu - July 24, 2014, 7:48 a.m.
From: Ting Liu <b28495@freescale.com>

* add customized qemu.conf to enable cgroup device and add /dev/net/tun
  device as cgroup
* add customized PKGCONFIG as not all features supported on ppc boards.

Signed-off-by: Ting Liu <b28495@freescale.com>
---
 .../libvirt/libvirt/qoriq-ppc/qemu.conf            |  465 ++++++++++++++++++++
 recipes-virtualization/libvirt/libvirt_%.bbappend  |    9 +
 2 files changed, 474 insertions(+), 0 deletions(-)
 create mode 100644 recipes-virtualization/libvirt/libvirt/qoriq-ppc/qemu.conf
 create mode 100644 recipes-virtualization/libvirt/libvirt_%.bbappend

Patch

diff --git a/recipes-virtualization/libvirt/libvirt/qoriq-ppc/qemu.conf b/recipes-virtualization/libvirt/libvirt/qoriq-ppc/qemu.conf
new file mode 100644
index 0000000..cc22fa1
--- /dev/null
+++ b/recipes-virtualization/libvirt/libvirt/qoriq-ppc/qemu.conf
@@ -0,0 +1,465 @@ 
+# Master configuration file for the QEMU driver.
+# All settings described here are optional - if omitted, sensible
+# defaults are used.
+
+# VNC is configured to listen on 127.0.0.1 by default.
+# To make it listen on all public interfaces, uncomment
+# this next option.
+#
+# NB, strong recommendation to enable TLS + x509 certificate
+# verification when allowing public access
+#
+#vnc_listen = "0.0.0.0"
+
+# Enable this option to have VNC served over an automatically created
+# unix socket. This prevents unprivileged access from users on the
+# host machine, though most VNC clients do not support it.
+#
+# This will only be enabled for VNC configurations that do not have
+# a hardcoded 'listen' or 'socket' value. This setting takes preference
+# over vnc_listen.
+#
+#vnc_auto_unix_socket = 1
+
+# Enable use of TLS encryption on the VNC server. This requires
+# a VNC client which supports the VeNCrypt protocol extension.
+# Examples include vinagre, virt-viewer, virt-manager and vencrypt
+# itself. UltraVNC, RealVNC, TightVNC do not support this
+#
+# It is necessary to setup CA and issue a server certificate
+# before enabling this.
+#
+#vnc_tls = 1
+
+
+# Use of TLS requires that x509 certificates be issued. The
+# default it to keep them in /etc/pki/libvirt-vnc. This directory
+# must contain
+#
+#  ca-cert.pem - the CA master certificate
+#  server-cert.pem - the server certificate signed with ca-cert.pem
+#  server-key.pem  - the server private key
+#
+# This option allows the certificate directory to be changed
+#
+#vnc_tls_x509_cert_dir = "/etc/pki/libvirt-vnc"
+
+
+# The default TLS configuration only uses certificates for the server
+# allowing the client to verify the server's identity and establish
+# an encrypted channel.
+#
+# It is possible to use x509 certificates for authentication too, by
+# issuing a x509 certificate to every client who needs to connect.
+#
+# Enabling this option will reject any client who does not have a
+# certificate signed by the CA in /etc/pki/libvirt-vnc/ca-cert.pem
+#
+#vnc_tls_x509_verify = 1
+
+
+# The default VNC password. Only 8 letters are significant for
+# VNC passwords. This parameter is only used if the per-domain
+# XML config does not already provide a password. To allow
+# access without passwords, leave this commented out. An empty
+# string will still enable passwords, but be rejected by QEMU,
+# effectively preventing any use of VNC. Obviously change this
+# example here before you set this.
+#
+#vnc_password = "XYZ12345"
+
+
+# Enable use of SASL encryption on the VNC server. This requires
+# a VNC client which supports the SASL protocol extension.
+# Examples include vinagre, virt-viewer and virt-manager
+# itself. UltraVNC, RealVNC, TightVNC do not support this
+#
+# It is necessary to configure /etc/sasl2/qemu.conf to choose
+# the desired SASL plugin (eg, GSSPI for Kerberos)
+#
+#vnc_sasl = 1
+
+
+# The default SASL configuration file is located in /etc/sasl2/
+# When running libvirtd unprivileged, it may be desirable to
+# override the configs in this location. Set this parameter to
+# point to the directory, and create a qemu.conf in that location
+#
+#vnc_sasl_dir = "/some/directory/sasl2"
+
+
+# QEMU implements an extension for providing audio over a VNC connection,
+# though if your VNC client does not support it, your only chance for getting
+# sound output is through regular audio backends. By default, libvirt will
+# disable all QEMU sound backends if using VNC, since they can cause
+# permissions issues. Enabling this option will make libvirtd honor the
+# QEMU_AUDIO_DRV environment variable when using VNC.
+#
+#vnc_allow_host_audio = 0
+
+
+
+# SPICE is configured to listen on 127.0.0.1 by default.
+# To make it listen on all public interfaces, uncomment
+# this next option.
+#
+# NB, strong recommendation to enable TLS + x509 certificate
+# verification when allowing public access
+#
+#spice_listen = "0.0.0.0"
+
+
+# Enable use of TLS encryption on the SPICE server.
+#
+# It is necessary to setup CA and issue a server certificate
+# before enabling this.
+#
+#spice_tls = 1
+
+
+# Use of TLS requires that x509 certificates be issued. The
+# default it to keep them in /etc/pki/libvirt-spice. This directory
+# must contain
+#
+#  ca-cert.pem - the CA master certificate
+#  server-cert.pem - the server certificate signed with ca-cert.pem
+#  server-key.pem  - the server private key
+#
+# This option allows the certificate directory to be changed.
+#
+#spice_tls_x509_cert_dir = "/etc/pki/libvirt-spice"
+
+
+# The default SPICE password. This parameter is only used if the
+# per-domain XML config does not already provide a password. To
+# allow access without passwords, leave this commented out. An
+# empty string will still enable passwords, but be rejected by
+# QEMU, effectively preventing any use of SPICE. Obviously change
+# this example here before you set this.
+#
+#spice_password = "XYZ12345"
+
+
+# Enable use of SASL encryption on the SPICE server. This requires
+# a SPICE client which supports the SASL protocol extension.
+#
+# It is necessary to configure /etc/sasl2/qemu.conf to choose
+# the desired SASL plugin (eg, GSSPI for Kerberos)
+#
+#spice_sasl = 1
+
+# The default SASL configuration file is located in /etc/sasl2/
+# When running libvirtd unprivileged, it may be desirable to
+# override the configs in this location. Set this parameter to
+# point to the directory, and create a qemu.conf in that location
+#
+#spice_sasl_dir = "/some/directory/sasl2"
+
+
+# By default, if no graphical front end is configured, libvirt will disable
+# QEMU audio output since directly talking to alsa/pulseaudio may not work
+# with various security settings. If you know what you're doing, enable
+# the setting below and libvirt will passthrough the QEMU_AUDIO_DRV
+# environment variable when using nographics.
+#
+#nographics_allow_host_audio = 1
+
+
+# Override the port for creating both VNC and SPICE sessions (min).
+# This defaults to 5900 and increases for consecutive sessions
+# or when ports are occupied, until it hits the maximum.
+#
+# Minimum must be greater than or equal to 5900 as lower number would
+# result into negative vnc display number.
+#
+# Maximum must be less than 65536, because higher numbers do not make
+# sense as a port number.
+#
+#remote_display_port_min = 5900
+#remote_display_port_max = 65535
+
+# VNC WebSocket port policies, same rules apply as with remote display
+# ports.  VNC WebSockets use similar display <-> port mappings, with
+# the exception being that ports starts from 5700 instead of 5900.
+#
+#remote_websocket_port_min = 5700
+#remote_websocket_port_max = 65535
+
+# The default security driver is SELinux. If SELinux is disabled
+# on the host, then the security driver will automatically disable
+# itself. If you wish to disable QEMU SELinux security driver while
+# leaving SELinux enabled for the host in general, then set this
+# to 'none' instead. It's also possible to use more than one security
+# driver at the same time, for this use a list of names separated by
+# comma and delimited by square brackets. For example:
+#
+#       security_driver = [ "selinux", "apparmor" ]
+#
+# Notes: The DAC security driver is always enabled; as a result, the
+# value of security_driver cannot contain "dac".  The value "none" is
+# a special value; security_driver can be set to that value in
+# isolation, but it cannot appear in a list of drivers.
+#
+#security_driver = "selinux"
+
+# If set to non-zero, then the default security labeling
+# will make guests confined. If set to zero, then guests
+# will be unconfined by default. Defaults to 1.
+#security_default_confined = 1
+
+# If set to non-zero, then attempts to create unconfined
+# guests will be blocked. Defaults to 0.
+#security_require_confined = 1
+
+# The user for QEMU processes run by the system instance. It can be
+# specified as a user name or as a user id. The qemu driver will try to
+# parse this value first as a name and then, if the name doesn't exist,
+# as a user id.
+#
+# Since a sequence of digits is a valid user name, a leading plus sign
+# can be used to ensure that a user id will not be interpreted as a user
+# name.
+#
+# Some examples of valid values are:
+#
+#       user = "qemu"   # A user named "qemu"
+#       user = "+0"     # Super user (uid=0)
+#       user = "100"    # A user named "100" or a user with uid=100
+#
+#user = "root"
+
+# The group for QEMU processes run by the system instance. It can be
+# specified in a similar way to user.
+#group = "root"
+
+# Whether libvirt should dynamically change file ownership
+# to match the configured user/group above. Defaults to 1.
+# Set to 0 to disable file ownership changes.
+#dynamic_ownership = 1
+
+
+# What cgroup controllers to make use of with QEMU guests
+#
+#  - 'cpu' - use for schedular tunables
+#  - 'devices' - use for device whitelisting
+#  - 'memory' - use for memory tunables
+#  - 'blkio' - use for block devices I/O tunables
+#  - 'cpuset' - use for CPUs and memory nodes
+#  - 'cpuacct' - use for CPUs statistics.
+#
+# NB, even if configured here, they won't be used unless
+# the administrator has mounted cgroups, e.g.:
+#
+#  mkdir /dev/cgroup
+#  mount -t cgroup -o devices,cpu,memory,blkio,cpuset none /dev/cgroup
+#
+# They can be mounted anywhere, and different controllers
+# can be mounted in different locations. libvirt will detect
+# where they are located.
+#
+#cgroup_controllers = [ "cpu", "devices", "memory", "blkio", "cpuset", "cpuacct" ]
+
+# This is the basic set of devices allowed / required by
+# all virtual machines.
+#
+# As well as this, any configured block backed disks,
+# all sound device, and all PTY devices are allowed.
+#
+# This will only need setting if newer QEMU suddenly
+# wants some device we don't already know about.
+#
+cgroup_device_acl = [
+    "/dev/null", "/dev/full", "/dev/zero",
+    "/dev/random", "/dev/urandom",
+    "/dev/ptmx", "/dev/kvm", "/dev/kqemu",
+    "/dev/rtc", "/dev/hpet", "/dev/vfio/vfio", "/dev/net/tun"
+]
+
+
+# The default format for Qemu/KVM guest save images is raw; that is, the
+# memory from the domain is dumped out directly to a file.  If you have
+# guests with a large amount of memory, however, this can take up quite
+# a bit of space.  If you would like to compress the images while they
+# are being saved to disk, you can also set "lzop", "gzip", "bzip2", or "xz"
+# for save_image_format.  Note that this means you slow down the process of
+# saving a domain in order to save disk space; the list above is in descending
+# order by performance and ascending order by compression ratio.
+#
+# save_image_format is used when you use 'virsh save' or 'virsh managedsave'
+# at scheduled saving, and it is an error if the specified save_image_format
+# is not valid, or the requested compression program can't be found.
+#
+# dump_image_format is used when you use 'virsh dump' at emergency
+# crashdump, and if the specified dump_image_format is not valid, or
+# the requested compression program can't be found, this falls
+# back to "raw" compression.
+#
+# snapshot_image_format specifies the compression algorithm of the memory save
+# image when an external snapshot of a domain is taken. This does not apply
+# on disk image format. It is an error if the specified format isn't valid,
+# or the requested compression program can't be found.
+#
+#save_image_format = "raw"
+#dump_image_format = "raw"
+#snapshot_image_format = "raw"
+
+# When a domain is configured to be auto-dumped when libvirtd receives a
+# watchdog event from qemu guest, libvirtd will save dump files in directory
+# specified by auto_dump_path. Default value is /var/lib/libvirt/qemu/dump
+#
+#auto_dump_path = "/var/lib/libvirt/qemu/dump"
+
+# When a domain is configured to be auto-dumped, enabling this flag
+# has the same effect as using the VIR_DUMP_BYPASS_CACHE flag with the
+# virDomainCoreDump API.  That is, the system will avoid using the
+# file system cache while writing the dump file, but may cause
+# slower operation.
+#
+#auto_dump_bypass_cache = 0
+
+# When a domain is configured to be auto-started, enabling this flag
+# has the same effect as using the VIR_DOMAIN_START_BYPASS_CACHE flag
+# with the virDomainCreateWithFlags API.  That is, the system will
+# avoid using the file system cache when restoring any managed state
+# file, but may cause slower operation.
+#
+#auto_start_bypass_cache = 0
+
+# If provided by the host and a hugetlbfs mount point is configured,
+# a guest may request huge page backing.  When this mount point is
+# unspecified here, determination of a host mount point in /proc/mounts
+# will be attempted.  Specifying an explicit mount overrides detection
+# of the same in /proc/mounts.  Setting the mount point to "" will
+# disable guest hugepage backing.
+#
+# NB, within this mount point, guests will create memory backing files
+# in a location of  $MOUNTPOINT/libvirt/qemu
+#
+#hugetlbfs_mount = "/dev/hugepages"
+
+
+# Path to the setuid helper for creating tap devices.  This executable
+# is used to create <source type='bridge'> interfaces when libvirtd is
+# running unprivileged.  libvirt invokes the helper directly, instead
+# of using "-netdev bridge", for security reasons.
+#bridge_helper = "/usr/libexec/qemu-bridge-helper"
+
+
+
+# If clear_emulator_capabilities is enabled, libvirt will drop all
+# privileged capabilities of the QEmu/KVM emulator. This is enabled by
+# default.
+#
+# Warning: Disabling this option means that a compromised guest can
+# exploit the privileges and possibly do damage to the host.
+#
+#clear_emulator_capabilities = 1
+
+
+# If enabled, libvirt will have QEMU set its process name to
+# "qemu:VM_NAME", where VM_NAME is the name of the VM. The QEMU
+# process will appear as "qemu:VM_NAME" in process listings and
+# other system monitoring tools. By default, QEMU does not set
+# its process title, so the complete QEMU command (emulator and
+# its arguments) appear in process listings.
+#
+#set_process_name = 1
+
+
+# If max_processes is set to a positive integer, libvirt will use
+# it to set the maximum number of processes that can be run by qemu
+# user. This can be used to override default value set by host OS.
+# The same applies to max_files which sets the limit on the maximum
+# number of opened files.
+#
+#max_processes = 0
+#max_files = 0
+
+
+
+# mac_filter enables MAC addressed based filtering on bridge ports.
+# This currently requires ebtables to be installed.
+#
+#mac_filter = 1
+
+
+# By default, PCI devices below non-ACS switch are not allowed to be assigned
+# to guests. By setting relaxed_acs_check to 1 such devices will be allowed to
+# be assigned to guests.
+#
+#relaxed_acs_check = 1
+
+
+# If allow_disk_format_probing is enabled, libvirt will probe disk
+# images to attempt to identify their format, when not otherwise
+# specified in the XML. This is disabled by default.
+#
+# WARNING: Enabling probing is a security hole in almost all
+# deployments. It is strongly recommended that users update their
+# guest XML <disk> elements to include  <driver type='XXXX'/>
+# elements instead of enabling this option.
+#
+#allow_disk_format_probing = 1
+
+
+# To enable 'Sanlock' project based locking of the file
+# content (to prevent two VMs writing to the same
+# disk), uncomment this
+#
+#lock_manager = "sanlock"
+
+
+
+# Set limit of maximum APIs queued on one domain. All other APIs
+# over this threshold will fail on acquiring job lock. Specially,
+# setting to zero turns this feature off.
+# Note, that job lock is per domain.
+#
+#max_queued = 0
+
+###################################################################
+# Keepalive protocol:
+# This allows qemu driver to detect broken connections to remote
+# libvirtd during peer-to-peer migration.  A keepalive message is
+# sent to the deamon after keepalive_interval seconds of inactivity
+# to check if the deamon is still responding; keepalive_count is a
+# maximum number of keepalive messages that are allowed to be sent
+# to the deamon without getting any response before the connection
+# is considered broken.  In other words, the connection is
+# automatically closed approximately after
+# keepalive_interval * (keepalive_count + 1) seconds since the last
+# message received from the deamon.  If keepalive_interval is set to
+# -1, qemu driver will not send keepalive requests during
+# peer-to-peer migration; however, the remote libvirtd can still
+# send them and source libvirtd will send responses.  When
+# keepalive_count is set to 0, connections will be automatically
+# closed after keepalive_interval seconds of inactivity without
+# sending any keepalive messages.
+#
+#keepalive_interval = 5
+#keepalive_count = 5
+
+
+
+# Use seccomp syscall whitelisting in QEMU.
+# 1 = on, 0 = off, -1 = use QEMU default
+# Defaults to -1.
+#
+#seccomp_sandbox = 1
+
+
+
+# Override the listen address for all incoming migrations. Defaults to
+# 0.0.0.0 or :: in case if both host and qemu are capable of IPv6.
+#migration_address = "127.0.0.1"
+
+
+# Override the port range used for incoming migrations.
+#
+# Minimum must be greater than 0, however when QEMU is not running as root,
+# setting the minimum to be lower than 1024 will not work.
+#
+# Maximum must not be greater than 65535.
+#
+#migration_port_min = 49152
+#migration_port_max = 49215
diff --git a/recipes-virtualization/libvirt/libvirt_%.bbappend b/recipes-virtualization/libvirt/libvirt_%.bbappend
new file mode 100644
index 0000000..c7e6d32
--- /dev/null
+++ b/recipes-virtualization/libvirt/libvirt_%.bbappend
@@ -0,0 +1,9 @@ 
+PACKAGECONFIG_qoriq-ppc = "qemu yajl lxc test remote macvtap libvirtd netcf udev python"
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
+SRC_URI_append_qoriq-ppc = " file://qemu.conf"
+
+do_install_append_qoriq-ppc() {
+	install -m 0644 ${WORKDIR}/qemu.conf ${D}${sysconfdir}/libvirt/qemu.conf
+}
+