Patchwork [meta-fsl-arm-extra] u-boot-cubox-i: update to ed888a1e88 SRCREV

login
register
mail settings
Submitter Carlos Rafael Giani
Date April 26, 2014, 9:13 p.m.
Message ID <1398546823-4428-1-git-send-email-dv@pseudoterminal.org>
Download mbox | patch
Permalink /patch/71069/
State Accepted
Delegated to: Otavio Salvador
Headers show

Comments

Carlos Rafael Giani - April 26, 2014, 9:13 p.m.
This patch updates the revision to ed888a1e88 and corrects the
github URI , which should link to "SolidRun" instead of "rabeeh".

Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
---
 recipes-bsp/u-boot/u-boot-cubox-i_2013.10.bb | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Morgan McKenzie - April 26, 2014, 9:58 p.m.
Hi,

I've been looking into using the newer kernel with my development as it seems to have fixed a few issues I'm running into with the older one.
I was trying to enable both CAN channels and passing 'can0' on the kernel command line doesn't seem to do anything any more - has the syntax changed for enabling the second channel or has that functionality not been added yet?

Thanks!

Morgan McKenzie
Lauren Post - April 28, 2014, 12:34 p.m.
I asked the kernel team and this is their response

New kernel does not support the kernel command line like can0 after we switch to use device-tree

Users can use imx6q-sabreauto-flexcan1.dtb to enable flexcan1.
NOTE: flexcan1 is conflict with fec on pins.
So with imx6q-sabreauto-flexcan1.dtb, the fec will be disabled

Hope this helps.

Lauren


From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-bounces@yoctoproject.org] On Behalf Of Morgan McKenzie
Sent: Saturday, April 26, 2014 4:59 PM
To: meta-freescale@yoctoproject.org
Subject: [meta-freescale] CAN0 in 3.10.17 on IMX6QSabreAuto

Hi,


I've been looking into using the newer kernel with my development as it seems to have fixed a few issues I'm running into with the older one.

I was trying to enable both CAN channels and passing 'can0' on the kernel command line doesn't seem to do anything any more - has the syntax changed for enabling the second channel or has that functionality not been added yet?


Thanks!


Morgan McKenzie
Morgan McKenzie - April 29, 2014, 6:35 p.m.
Hi Lauren,

Thanks, that's very helpful!
For anyone else who runs into this - imx6q-sabreauto-flexcan1.dtb is already included in the uImage by default so all you need to do to enable it is change the u-boot parameter fdt_file to point to that file instead.

Morgan
From: Lauren.Post@freescale.com
To: rmtm@uvic.ca; meta-freescale@yoctoproject.org
Subject: RE: [meta-freescale] CAN0 in 3.10.17 on IMX6QSabreAuto
Date: Mon, 28 Apr 2014 12:34:12 +0000









I asked the kernel team and this is their response
 
New kernel does not support the kernel command line like can0 after we switch to use device-tree
 
Users can use imx6q-sabreauto-flexcan1.dtb to enable flexcan1.
NOTE: flexcan1 is conflict with fec on pins.

So with imx6q-sabreauto-flexcan1.dtb, the fec will be disabled
 
Hope this helps.


Lauren
 
 


From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-bounces@yoctoproject.org]
On Behalf Of Morgan McKenzie

Sent: Saturday, April 26, 2014 4:59 PM

To: meta-freescale@yoctoproject.org

Subject: [meta-freescale] CAN0 in 3.10.17 on IMX6QSabreAuto


 


Hi,


 


 


I've been looking into using the newer kernel with my development as it seems to have fixed a few issues I'm running into with the older one.


 


I was trying to enable both CAN channels and passing 'can0' on the kernel command line doesn't seem to do anything any more - has the syntax changed for enabling the second channel or has
 that functionality not been added yet?


 


 


Thanks!


 


 


Morgan McKenzie

Patch

diff --git a/recipes-bsp/u-boot/u-boot-cubox-i_2013.10.bb b/recipes-bsp/u-boot/u-boot-cubox-i_2013.10.bb
index 6fa2ce6..598be44 100644
--- a/recipes-bsp/u-boot/u-boot-cubox-i_2013.10.bb
+++ b/recipes-bsp/u-boot/u-boot-cubox-i_2013.10.bb
@@ -7,9 +7,9 @@  PROVIDES += "u-boot"
 
 PV = "v2013.10+git${SRCPV}"
 
-SRCREV = "920ea0f20276614e11961924b1990b6c922c8d0e"
+SRCREV = "ed888a1e885eda9e8d8313e6bd09c521f193f29d"
 SRC_URI = " \
-    git://github.com/rabeeh/u-boot-imx6.git;branch=imx6 \
+    git://github.com/SolidRun/u-boot-imx6.git;branch=imx6 \
     file://uEnv.txt \
     "