Patchwork [v2] icecc-create-env: Upgrade script

login
register
mail settings
Submitter Iyad Qumei
Date Dec. 5, 2013, 4:35 a.m.
Message ID <1386218151-16177-1-git-send-email-iyadkq@gmail.com>
Download mbox | patch
Permalink /patch/62869/
State New
Headers show

Comments

Iyad Qumei - Dec. 5, 2013, 4:35 a.m.
The original icecc script does not handle toolchain content
properly, resulting in build failures, such as

   gxx: fatal error: -fuse-linker-plugin, but liblto_plugin.so not found

This patch brings in the latest script form the icecream source, and
modifies it for use in the OE build environment.  The change was tested
with OE-Core built toolchain, and external toolchain.

Signed-off-by: Iyad Qumei <iyadkq@gmail.com>
---
 .../icecc-create-env-native/icecc-create-env       |  266 +++++++++++++++-----
 .../icecc-create-env-native_0.1.bb                 |   26 --
 .../icecc-create-env-native_1.0.1.bb               |   26 ++
 3 files changed, 233 insertions(+), 85 deletions(-)
 delete mode 100644 meta/recipes-devtools/icecc-create-env/icecc-create-env-native_0.1.bb
 create mode 100644 meta/recipes-devtools/icecc-create-env/icecc-create-env-native_1.0.1.bb
Iyad Qumei - Dec. 5, 2013, 4:37 a.m.
Just a follow up to the first patch.  I did test the change in master,
there was no "dependency loop" error when I built core-image-minimal, and I
did check the content of icecc-create-env script in sysroot, it was
identical to the updated version.

I repeated the build to confirm my original observation about the build,
and they were identical.  The only time I get the "dependency loop" error
is if I run "bitbake icecc-create-env-native".  However, I did overlook the
first this warning message:

WARNING: Unable to get checksum for icecc-create-env-native SRC_URI entry
icecc-create-env: file could not be found  00:00:29


On Wed, Dec 4, 2013 at 8:35 PM, Iyad Qumei <iyadkq@gmail.com> wrote:

> The original icecc script does not handle toolchain content
> properly, resulting in build failures, such as
>
>    gxx: fatal error: -fuse-linker-plugin, but liblto_plugin.so not found
>
> This patch brings in the latest script form the icecream source, and
> modifies it for use in the OE build environment.  The change was tested
> with OE-Core built toolchain, and external toolchain.
>
> Signed-off-by: Iyad Qumei <iyadkq@gmail.com>
> ---
>  .../icecc-create-env-native/icecc-create-env       |  266
> +++++++++++++++-----
>  .../icecc-create-env-native_0.1.bb                 |   26 --
>  .../icecc-create-env-native_1.0.1.bb               |   26 ++
>  3 files changed, 233 insertions(+), 85 deletions(-)
>  delete mode 100644 meta/recipes-devtools/icecc-create-env/
> icecc-create-env-native_0.1.bb
>  create mode 100644 meta/recipes-devtools/icecc-create-env/
> icecc-create-env-native_1.0.1.bb
>
> diff --git
> a/meta/recipes-devtools/icecc-create-env/icecc-create-env-native/icecc-create-env
> b/meta/recipes-devtools/icecc-create-env/icecc-create-env-native/icecc-create-env
> index 7e4dbc4..6d2e3c6 100755
> ---
> a/meta/recipes-devtools/icecc-create-env/icecc-create-env-native/icecc-create-env
> +++
> b/meta/recipes-devtools/icecc-create-env/icecc-create-env-native/icecc-create-env
> @@ -29,33 +29,95 @@ add_file ()
>    toadd="$name=$path"
>    is_contained "$toadd" && return
>    if test -z "$silent"; then
> -  echo "adding file $toadd"
> +    echo "adding file $toadd"
>    fi
>    target_files="$target_files $toadd"
>    if test -x "$path"; then
>      # Only call ldd when it makes sense
>      if file -L "$path" | grep 'ELF' > /dev/null 2>&1; then
> -       if ! file -L "$path" | grep 'static' > /dev/null 2>&1; then
> -          # ldd now outputs ld as /lib/ld-linux.so.xx on current nptl
> based glibc
> -               # this regexp parse the outputs like:
> -               # ldd /usr/bin/gcc
> -               #         linux-gate.so.1 =>  (0xffffe000)
> -               #         libc.so.6 => /lib/tls/libc.so.6 (0xb7e81000)
> -               #         /lib/ld-linux.so.2 (0xb7fe8000)
> -               # covering both situations ( with => and without )
> -          for lib in `ldd "$path" | sed -n 's,^[^/]*\(/[^ ]*\).*,\1,p'`;
> do
> -           test -f "$lib" || continue
> -           # Check wether the same library also exists in the parent
> directory,
> -           # and prefer that on the assumption that it is a more generic
> one.
> -           local baselib=`echo "$lib" | sed
> 's,\(/[^/]*\)/.*\(/[^/]*\)$,\1\2,'`
> -           test -f "$baselib" && lib=$baselib
> -         add_file "$lib"
> -        done
> +      if ! file -L "$path" | grep 'static' > /dev/null 2>&1; then
> +           # ldd now outputs ld as /lib/ld-linux.so.xx on current nptl
> based glibc
> +           # this regexp parse the outputs like:
> +           # ldd /usr/bin/gcc
> +           #         linux-gate.so.1 =>  (0xffffe000)
> +           #         libc.so.6 => /lib/tls/libc.so.6 (0xb7e81000)
> +           #         /lib/ld-linux.so.2 (0xb7fe8000)
> +           # covering both situations ( with => and without )
> +           for lib in `ldd "$path" | sed -n 's,^[^/]*\(/[^ ]*\).*,\1,p'`;
> do
> +             test -f "$lib" || continue
> +             # Check wether the same library also exists in the parent
> directory,
> +             # and prefer that on the assumption that it is a more
> generic one.
> +             local baselib=`echo "$lib" | sed
> 's,\(/[^/]*\)/.*\(/[^/]*\)$,\1\2,'`
> +             test -f "$baselib" && lib=$baselib
> +             add_file "$lib"
> +           done
>        fi
>      fi
>    fi
>  }
>
> +# returns abs path to filedir
> +abs_path()
> +{
> +    local path=$1
> +    if test -f "$path"; then
> +        pushd $(dirname $path) > /dev/null 2>&1
> +        dir_path=`pwd -P`
> +        path=$dir_path/$(basename $path)
> +        popd > /dev/null 2>&1
> +    elif test -d "$path"; then
> +        pushd $path > /dev/null 2>&1
> +        path=`pwd -P`
> +        popd > /dev/null 2>&1
> +    fi
> +    echo $path
> +}
> +
> +# Search and add file to the tarball file.
> +search_addfile()
> +{
> +    local compiler=$1
> +    local file_name=$2
> +    local file_installdir=$3
> +    local file=""
> +
> +    file=$($compiler -print-prog-name=$file_name)
> +
> +    if test -z "$file" || test "$file" = "$file_name" || ! test -e
> "$file"; then
> +        file=`$compiler -print-file-name=$file_name`
> +    fi
> +
> +    if ! test -e "$file"; then
> +        return 1
> +    fi
> +
> +    if test -z "$file_installdir"; then
> +        # The file is going to be added to the tarball
> +        # in the same path where the compiler found it.
> +
> +        file_installdir=$(dirname $file)
> +        abs_installdir=$(abs_path $file_installdir)
> +
> +        if test "$file_installdir" != "$abs_installdir"; then
> +            # The path where the compiler found the file is relative!
> +            # If the path where the compiler found the file is relative
> +            # to compiler's path, we must change it to be relative to
> +            # /usr/bin path where the compiler is going to be installed
> +            # in the tarball file.
> +            # Replacing relative path by abs path because the tar command
> +            # used to create the tarball file doesn't work well with
> +            # relative path as installdir.
> +
> +            compiler_basedir=$(abs_path ${compiler%/*/*})
> +            file_installdir=${abs_installdir/$compiler_basedir/"/usr"}
> +        fi
> +    fi
> +
> +    add_file "$file" "$file_installdir/$file_name"
> +
> +    return 0
> +}
> +
>  # backward compat
>  if test "$1" = "--respect-path"; then
>    shift
> @@ -67,62 +129,148 @@ if test "$1" = "--silent"; then
>   shift
>  fi
>
> -
> -added_gcc=$1
> -shift
> -added_gxx=$1
> -shift
> -added_as=$1
> -shift
> -archive_name=$1
> -
> -if test -z "$added_gcc" || test -z "$added_gxx" ; then
> -       echo "usage: $0 <gcc_path> <g++_path>"
> -       exit 1
> +if test "$1" != "--gcc" -a "$1" != "--clang"; then
> +    # backward compat
> +    added_gcc=$1
> +    shift
> +    added_gxx=$1
> +    shift
> +    added_as=$1
> +    shift
> +    archive_name=$1
> +    shift
> +    gcc=1
> +else
> +    if test "$1" = "--gcc"; then
> +        shift
> +        added_gcc=$1
> +        shift
> +        added_gxx=$1
> +        shift
> +        added_as=$1
> +        shift
> +        archive_name=$1
> +        shift
> +        gcc=1
> +    elif test "$1" = "--clang"; then
> +        shift
> +        added_clang=$1
> +        shift
> +        added_compilerwrapper=$1
> +        shift
> +        clang=1
> +    else
> +        usage
> +        exit 1
> +    fi
>  fi
>
> -if ! test -x "$added_gcc" ; then
> -  echo "'$added_gcc' is no executable."
> -  exit 1
> +if test -n "$gcc"; then
> +    if test -z "$added_gcc" || test -z "$added_gxx"; then
> +        usage
> +        exit 1
> +    fi
> +    if ! test -x "$added_gcc" ; then
> +        echo "'$added_gcc' is no executable."
> +        exit 1
> +    fi
> +    if ! test -x "$added_gxx" ; then
> +        echo "'$added_gxx' is no executable."
> +        exit 1
> +    fi
> +    if test -z "$added_as" ; then
> +      add_file /usr/bin/as /usr/bin/as
> +    else
> +      if ! test -x "$added_as" ; then
> +        echo "'$added_as' is no executable."
> +        exit 1
> +      fi
> +      add_file $added_as  /usr/bin/as
> +    fi
>  fi
>
> -if ! test -x "$added_gxx" ; then
> -  echo "'$added_gcc' is no executable."
> -  exit 1
> +if test -n "$clang"; then
> +    if ! test -x "$added_clang" ; then
> +        echo "'$added_clang' is no executable."
> +        exit 1
> +    fi
> +    if ! test -x "$added_compilerwrapper" ; then
> +        echo "'$added_compilerwrapper' is no executable."
> +        exit 1
> +    fi
>  fi
>
> +extrafiles=
> +while test "x$1" = "x--addfile"; do
> +    shift
> +    extrafiles="$extrafiles $1"
> +    shift
> +done
>
> +tempdir=`mktemp -d /tmp/iceccenvXXXXXX`
>
> -add_file $added_gcc /usr/bin/gcc
> -add_file $added_gxx /usr/bin/g++
> +# for testing the environment is usable at all
> +add_file /bin/true
>
> -if test -z "$added_as" ; then
> - add_file /usr/bin/as /usr/bin/as
> -else
> - if ! test -x "$added_as" ; then
> -  echo "'$added_as' is no executable."
> -  exit 1
> - fi
> +if test -n "$gcc"; then
> +    # getting compilers abs path
> +    added_gcc=$(abs_path $added_gcc)
> +    added_gxx=$(abs_path $added_gxx)
>
> - add_file $added_as  /usr/bin/as
> -fi
> +    if test -z "$clang"; then
> +        add_file $added_gcc /usr/bin/gcc
> +        add_file $added_gxx /usr/bin/g++
> +    else
> +        # HACK: The clang case below will add a wrapper in place of gcc,
> so add the real
> +        # gcc under a different name that the wrapper will call.
> +        add_file $added_gcc /usr/bin/gcc.bin
> +        add_file $added_gxx /usr/bin/g++.bin
> +    fi
> +    add_file `$added_gcc -print-prog-name=cc1` /usr/bin/cc1
> +    add_file `$added_gxx -print-prog-name=cc1plus` /usr/bin/cc1plus
> +
> +    gcc_as=$($added_gcc -print-prog-name=as)
> +    if test "$gcc_as" = "as"; then
> +      add_file /usr/bin/as
> +    else
> +      add_file "$gcc_as" /usr/bin/as
> +    fi
>
> -add_file `$added_gcc -print-prog-name=cc1` /usr/bin/cc1
> -add_file `$added_gxx -print-prog-name=cc1plus` /usr/bin/cc1plus
> -specfile=`$added_gcc -print-file-name=specs`
> -if test -n "$specfile" && test -e "$specfile"; then
> -  add_file "$specfile"
> +    search_addfile $added_gcc specs
> +    search_addfile $added_gcc liblto_plugin.so
>  fi
>
> -ltofile=`$added_gcc -print-prog-name=lto1`
> -pluginfile="${ltofile%lto1}liblto_plugin.so"
> -if test -r "$pluginfile"
> -then
> -  add_file $pluginfile  ${pluginfile#*usr}
> -  add_file $pluginfile  /usr${pluginfile#*usr}
> +if test -n "$clang"; then
> +    add_file $added_clang /usr/bin/clang
> +    # HACK: Older icecream remotes have /usr/bin/{gcc|g++} hardcoded and
> wouldn't
> +    # call /usr/bin/clang at all. So include a wrapper binary that will
> call gcc or clang
> +    # depending on an extra argument added by icecream.
> +    add_file $added_compilerwrapper /usr/bin/gcc
> +    add_file $added_compilerwrapper /usr/bin/g++
> +
> +    add_file $($added_clang -print-prog-name=as) /usr/bin/as
> +
> +    # clang always uses its internal .h files
> +    clangincludes=$(dirname $($added_clang
> -print-file-name=include/limits.h))
> +    clangprefix=$(dirname $(dirname $added_clang))
> +    for file in $(find $clangincludes -type f); do
> +      # get path without ..
> +      destfile=$(readlink -e $file)
> +      # and convert from <prefix> to /usr if needed
> +      destfile=$(echo $destfile | sed "s#$clangprefix#/usr#" )
> +      add_file "$file" "$destfile"
> +    done
>  fi
>
> -tempdir=`mktemp -d /tmp/iceccenvXXXXXX`
> +for extrafile in $extrafiles; do
> +    add_file $extrafile
> +done
> +
> +# special case for weird multilib setups
> +for dir in /lib /lib64 /usr/lib /usr/lib64; do
> +    test -L $dir && cp -p $dir $tempdir$dir
> +done
> +
>  new_target_files=
>  for i in $target_files; do
>   case $i in
> @@ -151,7 +299,7 @@ target_files=`for i in $new_target_files; do echo $i;
> done | sort`
>  #if not use the md5 of all files as the archive name
>  if test -z "$archive_name"; then
>    md5sum=NONE
> -  for file in /usr/bin/md5sum /bin/md5 /usr/bin/md5; do
> +  for file in /usr/bin/md5sum /bin/md5 /usr/bin/md5 /sbin/md5; do
>      if test -x $file; then
>        md5sum=$file
>        break
> diff --git a/meta/recipes-devtools/icecc-create-env/
> icecc-create-env-native_0.1.bb b/meta/recipes-devtools/icecc-create-env/
> icecc-create-env-native_0.1.bb
> deleted file mode 100644
> index b04474e..0000000
> --- a/meta/recipes-devtools/icecc-create-env/
> icecc-create-env-native_0.1.bb
> +++ /dev/null
> @@ -1,26 +0,0 @@
> -DESCRIPTION = "This is a modified version of the icecc-create-env script
> in order to\
> -make it work with OE."
> -SECTION = "base"
> -# source file has just a "GPL" word, but upstream is GPLv2+.
> -# most probably just GPL would be a mistake
> -LICENSE = "GPLv2+"
> -LIC_FILES_CHKSUM =
> "file://icecc-create-env;beginline=2;endline=5;md5=ae1df3d6a058bfda40b66094c5f6065f"
> -
> -PR = "r2"
> -
> -DEPENDS = ""
> -INHIBIT_DEFAULT_DEPS = "1"
> -
> -FILESPATH = "${FILE_DIRNAME}/${PN}/"
> -
> -inherit native
> -
> -PATCHTOOL = "patch"
> -SRC_URI = "file://icecc-create-env"
> -
> -S = "${WORKDIR}"
> -
> -do_install() {
> -    install -d ${D}/${bindir}
> -    install -m 0755 ${WORKDIR}/icecc-create-env ${D}/${bindir}
> -}
> diff --git a/meta/recipes-devtools/icecc-create-env/
> icecc-create-env-native_1.0.1.bb b/meta/recipes-devtools/icecc-create-env/
> icecc-create-env-native_1.0.1.bb
> new file mode 100644
> index 0000000..9f5c9a2
> --- /dev/null
> +++ b/meta/recipes-devtools/icecc-create-env/
> icecc-create-env-native_1.0.1.bb
> @@ -0,0 +1,26 @@
> +DESCRIPTION = "This is a modified version of the icecc-create-env script
> in order to\
> +make it work with OE."
> +SECTION = "base"
> +# source file has just a "GPL" word, but upstream is GPLv2+.
> +# most probably just GPL would be a mistake
> +LICENSE = "GPLv2+"
> +LIC_FILES_CHKSUM =
> "file://icecc-create-env;beginline=2;endline=5;md5=ae1df3d6a058bfda40b66094c5f6065f"
> +
> +PR = "r0"
> +
> +DEPENDS = ""
> +INHIBIT_DEFAULT_DEPS = "1"
> +
> +FILESPATH = "${FILE_DIRNAME}/${PN}/"
> +
> +inherit native
> +
> +PATCHTOOL = "patch"
> +SRC_URI = "file://icecc-create-env"
> +
> +S = "${WORKDIR}"
> +
> +do_install() {
> +    install -d ${D}/${bindir}
> +    install -m 0755 ${WORKDIR}/icecc-create-env ${D}/${bindir}
> +}
> --
> 1.7.10.4
>
>
Martin Jansa - Dec. 5, 2013, 11:49 a.m.
On Wed, Dec 04, 2013 at 08:35:51PM -0800, Iyad Qumei wrote:
> The original icecc script does not handle toolchain content
> properly, resulting in build failures, such as
> 
>    gxx: fatal error: -fuse-linker-plugin, but liblto_plugin.so not found
> 
> This patch brings in the latest script form the icecream source, and
> modifies it for use in the OE build environment.  The change was tested
> with OE-Core built toolchain, and external toolchain.
> 
> Signed-off-by: Iyad Qumei <iyadkq@gmail.com>
> ---
>  .../icecc-create-env-native/icecc-create-env       |  266 +++++++++++++++-----
>  .../icecc-create-env-native_0.1.bb                 |   26 --
>  .../icecc-create-env-native_1.0.1.bb               |   26 ++
>  3 files changed, 233 insertions(+), 85 deletions(-)
>  delete mode 100644 meta/recipes-devtools/icecc-create-env/icecc-create-env-native_0.1.bb
>  create mode 100644 meta/recipes-devtools/icecc-create-env/icecc-create-env-native_1.0.1.bb
> 
> diff --git a/meta/recipes-devtools/icecc-create-env/icecc-create-env-native/icecc-create-env b/meta/recipes-devtools/icecc-create-env/icecc-create-env-native/icecc-create-env
> index 7e4dbc4..6d2e3c6 100755
> --- a/meta/recipes-devtools/icecc-create-env/icecc-create-env-native/icecc-create-env
> +++ b/meta/recipes-devtools/icecc-create-env/icecc-create-env-native/icecc-create-env
> @@ -29,33 +29,95 @@ add_file ()
>    toadd="$name=$path"
>    is_contained "$toadd" && return
>    if test -z "$silent"; then
> -  echo "adding file $toadd"
> +    echo "adding file $toadd"
>    fi
>    target_files="$target_files $toadd"
>    if test -x "$path"; then
>      # Only call ldd when it makes sense
>      if file -L "$path" | grep 'ELF' > /dev/null 2>&1; then
> -	if ! file -L "$path" | grep 'static' > /dev/null 2>&1; then
> -	   # ldd now outputs ld as /lib/ld-linux.so.xx on current nptl based glibc
> -		# this regexp parse the outputs like:
> -		# ldd /usr/bin/gcc
> -		#         linux-gate.so.1 =>  (0xffffe000)
> -		#         libc.so.6 => /lib/tls/libc.so.6 (0xb7e81000)
> -		#         /lib/ld-linux.so.2 (0xb7fe8000)
> -		# covering both situations ( with => and without )
> -          for lib in `ldd "$path" | sed -n 's,^[^/]*\(/[^ ]*\).*,\1,p'`; do
> -	    test -f "$lib" || continue
> -	    # Check wether the same library also exists in the parent directory,
> -	    # and prefer that on the assumption that it is a more generic one.
> -	    local baselib=`echo "$lib" | sed 's,\(/[^/]*\)/.*\(/[^/]*\)$,\1\2,'`
> -	    test -f "$baselib" && lib=$baselib
> -	  add_file "$lib"
> -        done
> +      if ! file -L "$path" | grep 'static' > /dev/null 2>&1; then
> +           # ldd now outputs ld as /lib/ld-linux.so.xx on current nptl based glibc
> +           # this regexp parse the outputs like:
> +           # ldd /usr/bin/gcc
> +           #         linux-gate.so.1 =>  (0xffffe000)
> +           #         libc.so.6 => /lib/tls/libc.so.6 (0xb7e81000)
> +           #         /lib/ld-linux.so.2 (0xb7fe8000)
> +           # covering both situations ( with => and without )
> +           for lib in `ldd "$path" | sed -n 's,^[^/]*\(/[^ ]*\).*,\1,p'`; do
> +             test -f "$lib" || continue
> +             # Check wether the same library also exists in the parent directory,
> +             # and prefer that on the assumption that it is a more generic one.
> +             local baselib=`echo "$lib" | sed 's,\(/[^/]*\)/.*\(/[^/]*\)$,\1\2,'`
> +             test -f "$baselib" && lib=$baselib
> +             add_file "$lib"
> +           done
>        fi
>      fi
>    fi
>  }
>  
> +# returns abs path to filedir
> +abs_path()
> +{
> +    local path=$1
> +    if test -f "$path"; then
> +        pushd $(dirname $path) > /dev/null 2>&1
> +        dir_path=`pwd -P`
> +        path=$dir_path/$(basename $path)
> +        popd > /dev/null 2>&1
> +    elif test -d "$path"; then
> +        pushd $path > /dev/null 2>&1
> +        path=`pwd -P`
> +        popd > /dev/null 2>&1
> +    fi
> +    echo $path
> +}
> +
> +# Search and add file to the tarball file.
> +search_addfile()
> +{
> +    local compiler=$1
> +    local file_name=$2
> +    local file_installdir=$3
> +    local file=""
> +
> +    file=$($compiler -print-prog-name=$file_name)
> +
> +    if test -z "$file" || test "$file" = "$file_name" || ! test -e "$file"; then
> +        file=`$compiler -print-file-name=$file_name`
> +    fi
> +
> +    if ! test -e "$file"; then
> +        return 1
> +    fi
> +
> +    if test -z "$file_installdir"; then
> +        # The file is going to be added to the tarball
> +        # in the same path where the compiler found it.
> +
> +        file_installdir=$(dirname $file)
> +        abs_installdir=$(abs_path $file_installdir)
> +
> +        if test "$file_installdir" != "$abs_installdir"; then
> +            # The path where the compiler found the file is relative!
> +            # If the path where the compiler found the file is relative
> +            # to compiler's path, we must change it to be relative to
> +            # /usr/bin path where the compiler is going to be installed
> +            # in the tarball file.
> +            # Replacing relative path by abs path because the tar command
> +            # used to create the tarball file doesn't work well with
> +            # relative path as installdir.
> +
> +            compiler_basedir=$(abs_path ${compiler%/*/*})
> +            file_installdir=${abs_installdir/$compiler_basedir/"/usr"}
> +        fi
> +    fi
> +
> +    add_file "$file" "$file_installdir/$file_name"
> +
> +    return 0
> +}
> +
>  # backward compat
>  if test "$1" = "--respect-path"; then
>    shift
> @@ -67,62 +129,148 @@ if test "$1" = "--silent"; then
>   shift
>  fi
>  
> -
> -added_gcc=$1
> -shift
> -added_gxx=$1
> -shift
> -added_as=$1
> -shift
> -archive_name=$1
> -
> -if test -z "$added_gcc" || test -z "$added_gxx" ; then
> -	echo "usage: $0 <gcc_path> <g++_path>"
> -	exit 1
> +if test "$1" != "--gcc" -a "$1" != "--clang"; then
> +    # backward compat
> +    added_gcc=$1
> +    shift
> +    added_gxx=$1
> +    shift
> +    added_as=$1
> +    shift
> +    archive_name=$1
> +    shift
> +    gcc=1
> +else
> +    if test "$1" = "--gcc"; then
> +        shift
> +        added_gcc=$1
> +        shift
> +        added_gxx=$1
> +        shift
> +        added_as=$1
> +        shift
> +        archive_name=$1
> +        shift
> +        gcc=1
> +    elif test "$1" = "--clang"; then
> +        shift
> +        added_clang=$1
> +        shift
> +        added_compilerwrapper=$1
> +        shift
> +        clang=1
> +    else
> +        usage
> +        exit 1
> +    fi
>  fi
>  
> -if ! test -x "$added_gcc" ; then
> -  echo "'$added_gcc' is no executable."
> -  exit 1
> +if test -n "$gcc"; then
> +    if test -z "$added_gcc" || test -z "$added_gxx"; then
> +        usage
> +        exit 1
> +    fi
> +    if ! test -x "$added_gcc" ; then
> +        echo "'$added_gcc' is no executable."
> +        exit 1
> +    fi
> +    if ! test -x "$added_gxx" ; then
> +        echo "'$added_gxx' is no executable."
> +        exit 1
> +    fi
> +    if test -z "$added_as" ; then
> +      add_file /usr/bin/as /usr/bin/as
> +    else
> +      if ! test -x "$added_as" ; then
> +        echo "'$added_as' is no executable."
> +        exit 1
> +      fi
> +      add_file $added_as  /usr/bin/as
> +    fi
>  fi
>  
> -if ! test -x "$added_gxx" ; then
> -  echo "'$added_gcc' is no executable."
> -  exit 1
> +if test -n "$clang"; then
> +    if ! test -x "$added_clang" ; then
> +        echo "'$added_clang' is no executable."
> +        exit 1
> +    fi
> +    if ! test -x "$added_compilerwrapper" ; then
> +        echo "'$added_compilerwrapper' is no executable."
> +        exit 1
> +    fi
>  fi
>  
> +extrafiles=
> +while test "x$1" = "x--addfile"; do
> +    shift
> +    extrafiles="$extrafiles $1"
> +    shift
> +done
>  
> +tempdir=`mktemp -d /tmp/iceccenvXXXXXX`
>  
> -add_file $added_gcc /usr/bin/gcc
> -add_file $added_gxx /usr/bin/g++
> +# for testing the environment is usable at all
> +add_file /bin/true
>  
> -if test -z "$added_as" ; then
> - add_file /usr/bin/as /usr/bin/as
> -else
> - if ! test -x "$added_as" ; then
> -  echo "'$added_as' is no executable."
> -  exit 1
> - fi
> +if test -n "$gcc"; then
> +    # getting compilers abs path
> +    added_gcc=$(abs_path $added_gcc)
> +    added_gxx=$(abs_path $added_gxx)
>  
> - add_file $added_as  /usr/bin/as
> -fi
> +    if test -z "$clang"; then
> +        add_file $added_gcc /usr/bin/gcc
> +        add_file $added_gxx /usr/bin/g++
> +    else
> +        # HACK: The clang case below will add a wrapper in place of gcc, so add the real
> +        # gcc under a different name that the wrapper will call.
> +        add_file $added_gcc /usr/bin/gcc.bin
> +        add_file $added_gxx /usr/bin/g++.bin
> +    fi
> +    add_file `$added_gcc -print-prog-name=cc1` /usr/bin/cc1
> +    add_file `$added_gxx -print-prog-name=cc1plus` /usr/bin/cc1plus
> +
> +    gcc_as=$($added_gcc -print-prog-name=as)
> +    if test "$gcc_as" = "as"; then
> +      add_file /usr/bin/as
> +    else
> +      add_file "$gcc_as" /usr/bin/as
> +    fi
>  
> -add_file `$added_gcc -print-prog-name=cc1` /usr/bin/cc1
> -add_file `$added_gxx -print-prog-name=cc1plus` /usr/bin/cc1plus
> -specfile=`$added_gcc -print-file-name=specs`
> -if test -n "$specfile" && test -e "$specfile"; then
> -  add_file "$specfile"
> +    search_addfile $added_gcc specs
> +    search_addfile $added_gcc liblto_plugin.so
>  fi
>  
> -ltofile=`$added_gcc -print-prog-name=lto1`
> -pluginfile="${ltofile%lto1}liblto_plugin.so"
> -if test -r "$pluginfile"
> -then
> -  add_file $pluginfile  ${pluginfile#*usr}
> -  add_file $pluginfile  /usr${pluginfile#*usr}
> +if test -n "$clang"; then
> +    add_file $added_clang /usr/bin/clang
> +    # HACK: Older icecream remotes have /usr/bin/{gcc|g++} hardcoded and wouldn't
> +    # call /usr/bin/clang at all. So include a wrapper binary that will call gcc or clang
> +    # depending on an extra argument added by icecream.
> +    add_file $added_compilerwrapper /usr/bin/gcc
> +    add_file $added_compilerwrapper /usr/bin/g++
> +
> +    add_file $($added_clang -print-prog-name=as) /usr/bin/as
> +
> +    # clang always uses its internal .h files
> +    clangincludes=$(dirname $($added_clang -print-file-name=include/limits.h))
> +    clangprefix=$(dirname $(dirname $added_clang))
> +    for file in $(find $clangincludes -type f); do
> +      # get path without ..
> +      destfile=$(readlink -e $file)
> +      # and convert from <prefix> to /usr if needed
> +      destfile=$(echo $destfile | sed "s#$clangprefix#/usr#" )
> +      add_file "$file" "$destfile"
> +    done
>  fi
>  
> -tempdir=`mktemp -d /tmp/iceccenvXXXXXX`
> +for extrafile in $extrafiles; do
> +    add_file $extrafile
> +done
> +
> +# special case for weird multilib setups
> +for dir in /lib /lib64 /usr/lib /usr/lib64; do
> +    test -L $dir && cp -p $dir $tempdir$dir
> +done
> +
>  new_target_files=
>  for i in $target_files; do
>   case $i in
> @@ -151,7 +299,7 @@ target_files=`for i in $new_target_files; do echo $i; done | sort`
>  #if not use the md5 of all files as the archive name
>  if test -z "$archive_name"; then
>    md5sum=NONE
> -  for file in /usr/bin/md5sum /bin/md5 /usr/bin/md5; do
> +  for file in /usr/bin/md5sum /bin/md5 /usr/bin/md5 /sbin/md5; do
>      if test -x $file; then
>        md5sum=$file
>        break
> diff --git a/meta/recipes-devtools/icecc-create-env/icecc-create-env-native_0.1.bb b/meta/recipes-devtools/icecc-create-env/icecc-create-env-native_0.1.bb
> deleted file mode 100644
> index b04474e..0000000
> --- a/meta/recipes-devtools/icecc-create-env/icecc-create-env-native_0.1.bb
> +++ /dev/null
> @@ -1,26 +0,0 @@
> -DESCRIPTION = "This is a modified version of the icecc-create-env script in order to\
> -make it work with OE."
> -SECTION = "base"
> -# source file has just a "GPL" word, but upstream is GPLv2+.
> -# most probably just GPL would be a mistake
> -LICENSE = "GPLv2+"
> -LIC_FILES_CHKSUM = "file://icecc-create-env;beginline=2;endline=5;md5=ae1df3d6a058bfda40b66094c5f6065f"
> -
> -PR = "r2"
> -
> -DEPENDS = ""
> -INHIBIT_DEFAULT_DEPS = "1"
> -
> -FILESPATH = "${FILE_DIRNAME}/${PN}/"
> -
> -inherit native
> -
> -PATCHTOOL = "patch"
> -SRC_URI = "file://icecc-create-env"
> -
> -S = "${WORKDIR}"
> -
> -do_install() {
> -    install -d ${D}/${bindir}
> -    install -m 0755 ${WORKDIR}/icecc-create-env ${D}/${bindir}
> -}
> diff --git a/meta/recipes-devtools/icecc-create-env/icecc-create-env-native_1.0.1.bb b/meta/recipes-devtools/icecc-create-env/icecc-create-env-native_1.0.1.bb
> new file mode 100644
> index 0000000..9f5c9a2
> --- /dev/null
> +++ b/meta/recipes-devtools/icecc-create-env/icecc-create-env-native_1.0.1.bb
> @@ -0,0 +1,26 @@
> +DESCRIPTION = "This is a modified version of the icecc-create-env script in order to\
> +make it work with OE."
> +SECTION = "base"
> +# source file has just a "GPL" word, but upstream is GPLv2+.
> +# most probably just GPL would be a mistake
> +LICENSE = "GPLv2+"
> +LIC_FILES_CHKSUM = "file://icecc-create-env;beginline=2;endline=5;md5=ae1df3d6a058bfda40b66094c5f6065f"
> +
> +PR = "r0"

drop

> +
> +DEPENDS = ""
> +INHIBIT_DEFAULT_DEPS = "1"
> +
> +FILESPATH = "${FILE_DIRNAME}/${PN}/"
> +
> +inherit native
> +
> +PATCHTOOL = "patch"
> +SRC_URI = "file://icecc-create-env"
> +
> +S = "${WORKDIR}"
> +
> +do_install() {
> +    install -d ${D}/${bindir}
> +    install -m 0755 ${WORKDIR}/icecc-create-env ${D}/${bindir}
> +}
> -- 
> 1.7.10.4
> 
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/openembedded-core

Patch

diff --git a/meta/recipes-devtools/icecc-create-env/icecc-create-env-native/icecc-create-env b/meta/recipes-devtools/icecc-create-env/icecc-create-env-native/icecc-create-env
index 7e4dbc4..6d2e3c6 100755
--- a/meta/recipes-devtools/icecc-create-env/icecc-create-env-native/icecc-create-env
+++ b/meta/recipes-devtools/icecc-create-env/icecc-create-env-native/icecc-create-env
@@ -29,33 +29,95 @@  add_file ()
   toadd="$name=$path"
   is_contained "$toadd" && return
   if test -z "$silent"; then
-  echo "adding file $toadd"
+    echo "adding file $toadd"
   fi
   target_files="$target_files $toadd"
   if test -x "$path"; then
     # Only call ldd when it makes sense
     if file -L "$path" | grep 'ELF' > /dev/null 2>&1; then
-	if ! file -L "$path" | grep 'static' > /dev/null 2>&1; then
-	   # ldd now outputs ld as /lib/ld-linux.so.xx on current nptl based glibc
-		# this regexp parse the outputs like:
-		# ldd /usr/bin/gcc
-		#         linux-gate.so.1 =>  (0xffffe000)
-		#         libc.so.6 => /lib/tls/libc.so.6 (0xb7e81000)
-		#         /lib/ld-linux.so.2 (0xb7fe8000)
-		# covering both situations ( with => and without )
-          for lib in `ldd "$path" | sed -n 's,^[^/]*\(/[^ ]*\).*,\1,p'`; do
-	    test -f "$lib" || continue
-	    # Check wether the same library also exists in the parent directory,
-	    # and prefer that on the assumption that it is a more generic one.
-	    local baselib=`echo "$lib" | sed 's,\(/[^/]*\)/.*\(/[^/]*\)$,\1\2,'`
-	    test -f "$baselib" && lib=$baselib
-	  add_file "$lib"
-        done
+      if ! file -L "$path" | grep 'static' > /dev/null 2>&1; then
+           # ldd now outputs ld as /lib/ld-linux.so.xx on current nptl based glibc
+           # this regexp parse the outputs like:
+           # ldd /usr/bin/gcc
+           #         linux-gate.so.1 =>  (0xffffe000)
+           #         libc.so.6 => /lib/tls/libc.so.6 (0xb7e81000)
+           #         /lib/ld-linux.so.2 (0xb7fe8000)
+           # covering both situations ( with => and without )
+           for lib in `ldd "$path" | sed -n 's,^[^/]*\(/[^ ]*\).*,\1,p'`; do
+             test -f "$lib" || continue
+             # Check wether the same library also exists in the parent directory,
+             # and prefer that on the assumption that it is a more generic one.
+             local baselib=`echo "$lib" | sed 's,\(/[^/]*\)/.*\(/[^/]*\)$,\1\2,'`
+             test -f "$baselib" && lib=$baselib
+             add_file "$lib"
+           done
       fi
     fi
   fi
 }
 
+# returns abs path to filedir
+abs_path()
+{
+    local path=$1
+    if test -f "$path"; then
+        pushd $(dirname $path) > /dev/null 2>&1
+        dir_path=`pwd -P`
+        path=$dir_path/$(basename $path)
+        popd > /dev/null 2>&1
+    elif test -d "$path"; then
+        pushd $path > /dev/null 2>&1
+        path=`pwd -P`
+        popd > /dev/null 2>&1
+    fi
+    echo $path
+}
+
+# Search and add file to the tarball file.
+search_addfile()
+{
+    local compiler=$1
+    local file_name=$2
+    local file_installdir=$3
+    local file=""
+
+    file=$($compiler -print-prog-name=$file_name)
+
+    if test -z "$file" || test "$file" = "$file_name" || ! test -e "$file"; then
+        file=`$compiler -print-file-name=$file_name`
+    fi
+
+    if ! test -e "$file"; then
+        return 1
+    fi
+
+    if test -z "$file_installdir"; then
+        # The file is going to be added to the tarball
+        # in the same path where the compiler found it.
+
+        file_installdir=$(dirname $file)
+        abs_installdir=$(abs_path $file_installdir)
+
+        if test "$file_installdir" != "$abs_installdir"; then
+            # The path where the compiler found the file is relative!
+            # If the path where the compiler found the file is relative
+            # to compiler's path, we must change it to be relative to
+            # /usr/bin path where the compiler is going to be installed
+            # in the tarball file.
+            # Replacing relative path by abs path because the tar command
+            # used to create the tarball file doesn't work well with
+            # relative path as installdir.
+
+            compiler_basedir=$(abs_path ${compiler%/*/*})
+            file_installdir=${abs_installdir/$compiler_basedir/"/usr"}
+        fi
+    fi
+
+    add_file "$file" "$file_installdir/$file_name"
+
+    return 0
+}
+
 # backward compat
 if test "$1" = "--respect-path"; then
   shift
@@ -67,62 +129,148 @@  if test "$1" = "--silent"; then
  shift
 fi
 
-
-added_gcc=$1
-shift
-added_gxx=$1
-shift
-added_as=$1
-shift
-archive_name=$1
-
-if test -z "$added_gcc" || test -z "$added_gxx" ; then
-	echo "usage: $0 <gcc_path> <g++_path>"
-	exit 1
+if test "$1" != "--gcc" -a "$1" != "--clang"; then
+    # backward compat
+    added_gcc=$1
+    shift
+    added_gxx=$1
+    shift
+    added_as=$1
+    shift
+    archive_name=$1
+    shift
+    gcc=1
+else
+    if test "$1" = "--gcc"; then
+        shift
+        added_gcc=$1
+        shift
+        added_gxx=$1
+        shift
+        added_as=$1
+        shift
+        archive_name=$1
+        shift
+        gcc=1
+    elif test "$1" = "--clang"; then
+        shift
+        added_clang=$1
+        shift
+        added_compilerwrapper=$1
+        shift
+        clang=1
+    else
+        usage
+        exit 1
+    fi
 fi
 
-if ! test -x "$added_gcc" ; then
-  echo "'$added_gcc' is no executable."
-  exit 1
+if test -n "$gcc"; then
+    if test -z "$added_gcc" || test -z "$added_gxx"; then
+        usage
+        exit 1
+    fi
+    if ! test -x "$added_gcc" ; then
+        echo "'$added_gcc' is no executable."
+        exit 1
+    fi
+    if ! test -x "$added_gxx" ; then
+        echo "'$added_gxx' is no executable."
+        exit 1
+    fi
+    if test -z "$added_as" ; then
+      add_file /usr/bin/as /usr/bin/as
+    else
+      if ! test -x "$added_as" ; then
+        echo "'$added_as' is no executable."
+        exit 1
+      fi
+      add_file $added_as  /usr/bin/as
+    fi
 fi
 
-if ! test -x "$added_gxx" ; then
-  echo "'$added_gcc' is no executable."
-  exit 1
+if test -n "$clang"; then
+    if ! test -x "$added_clang" ; then
+        echo "'$added_clang' is no executable."
+        exit 1
+    fi
+    if ! test -x "$added_compilerwrapper" ; then
+        echo "'$added_compilerwrapper' is no executable."
+        exit 1
+    fi
 fi
 
+extrafiles=
+while test "x$1" = "x--addfile"; do
+    shift
+    extrafiles="$extrafiles $1"
+    shift
+done
 
+tempdir=`mktemp -d /tmp/iceccenvXXXXXX`
 
-add_file $added_gcc /usr/bin/gcc
-add_file $added_gxx /usr/bin/g++
+# for testing the environment is usable at all
+add_file /bin/true
 
-if test -z "$added_as" ; then
- add_file /usr/bin/as /usr/bin/as
-else
- if ! test -x "$added_as" ; then
-  echo "'$added_as' is no executable."
-  exit 1
- fi
+if test -n "$gcc"; then
+    # getting compilers abs path
+    added_gcc=$(abs_path $added_gcc)
+    added_gxx=$(abs_path $added_gxx)
 
- add_file $added_as  /usr/bin/as
-fi
+    if test -z "$clang"; then
+        add_file $added_gcc /usr/bin/gcc
+        add_file $added_gxx /usr/bin/g++
+    else
+        # HACK: The clang case below will add a wrapper in place of gcc, so add the real
+        # gcc under a different name that the wrapper will call.
+        add_file $added_gcc /usr/bin/gcc.bin
+        add_file $added_gxx /usr/bin/g++.bin
+    fi
+    add_file `$added_gcc -print-prog-name=cc1` /usr/bin/cc1
+    add_file `$added_gxx -print-prog-name=cc1plus` /usr/bin/cc1plus
+
+    gcc_as=$($added_gcc -print-prog-name=as)
+    if test "$gcc_as" = "as"; then
+      add_file /usr/bin/as
+    else
+      add_file "$gcc_as" /usr/bin/as
+    fi
 
-add_file `$added_gcc -print-prog-name=cc1` /usr/bin/cc1
-add_file `$added_gxx -print-prog-name=cc1plus` /usr/bin/cc1plus
-specfile=`$added_gcc -print-file-name=specs`
-if test -n "$specfile" && test -e "$specfile"; then
-  add_file "$specfile"
+    search_addfile $added_gcc specs
+    search_addfile $added_gcc liblto_plugin.so
 fi
 
-ltofile=`$added_gcc -print-prog-name=lto1`
-pluginfile="${ltofile%lto1}liblto_plugin.so"
-if test -r "$pluginfile"
-then
-  add_file $pluginfile  ${pluginfile#*usr}
-  add_file $pluginfile  /usr${pluginfile#*usr}
+if test -n "$clang"; then
+    add_file $added_clang /usr/bin/clang
+    # HACK: Older icecream remotes have /usr/bin/{gcc|g++} hardcoded and wouldn't
+    # call /usr/bin/clang at all. So include a wrapper binary that will call gcc or clang
+    # depending on an extra argument added by icecream.
+    add_file $added_compilerwrapper /usr/bin/gcc
+    add_file $added_compilerwrapper /usr/bin/g++
+
+    add_file $($added_clang -print-prog-name=as) /usr/bin/as
+
+    # clang always uses its internal .h files
+    clangincludes=$(dirname $($added_clang -print-file-name=include/limits.h))
+    clangprefix=$(dirname $(dirname $added_clang))
+    for file in $(find $clangincludes -type f); do
+      # get path without ..
+      destfile=$(readlink -e $file)
+      # and convert from <prefix> to /usr if needed
+      destfile=$(echo $destfile | sed "s#$clangprefix#/usr#" )
+      add_file "$file" "$destfile"
+    done
 fi
 
-tempdir=`mktemp -d /tmp/iceccenvXXXXXX`
+for extrafile in $extrafiles; do
+    add_file $extrafile
+done
+
+# special case for weird multilib setups
+for dir in /lib /lib64 /usr/lib /usr/lib64; do
+    test -L $dir && cp -p $dir $tempdir$dir
+done
+
 new_target_files=
 for i in $target_files; do
  case $i in
@@ -151,7 +299,7 @@  target_files=`for i in $new_target_files; do echo $i; done | sort`
 #if not use the md5 of all files as the archive name
 if test -z "$archive_name"; then
   md5sum=NONE
-  for file in /usr/bin/md5sum /bin/md5 /usr/bin/md5; do
+  for file in /usr/bin/md5sum /bin/md5 /usr/bin/md5 /sbin/md5; do
     if test -x $file; then
       md5sum=$file
       break
diff --git a/meta/recipes-devtools/icecc-create-env/icecc-create-env-native_0.1.bb b/meta/recipes-devtools/icecc-create-env/icecc-create-env-native_0.1.bb
deleted file mode 100644
index b04474e..0000000
--- a/meta/recipes-devtools/icecc-create-env/icecc-create-env-native_0.1.bb
+++ /dev/null
@@ -1,26 +0,0 @@ 
-DESCRIPTION = "This is a modified version of the icecc-create-env script in order to\
-make it work with OE."
-SECTION = "base"
-# source file has just a "GPL" word, but upstream is GPLv2+.
-# most probably just GPL would be a mistake
-LICENSE = "GPLv2+"
-LIC_FILES_CHKSUM = "file://icecc-create-env;beginline=2;endline=5;md5=ae1df3d6a058bfda40b66094c5f6065f"
-
-PR = "r2"
-
-DEPENDS = ""
-INHIBIT_DEFAULT_DEPS = "1"
-
-FILESPATH = "${FILE_DIRNAME}/${PN}/"
-
-inherit native
-
-PATCHTOOL = "patch"
-SRC_URI = "file://icecc-create-env"
-
-S = "${WORKDIR}"
-
-do_install() {
-    install -d ${D}/${bindir}
-    install -m 0755 ${WORKDIR}/icecc-create-env ${D}/${bindir}
-}
diff --git a/meta/recipes-devtools/icecc-create-env/icecc-create-env-native_1.0.1.bb b/meta/recipes-devtools/icecc-create-env/icecc-create-env-native_1.0.1.bb
new file mode 100644
index 0000000..9f5c9a2
--- /dev/null
+++ b/meta/recipes-devtools/icecc-create-env/icecc-create-env-native_1.0.1.bb
@@ -0,0 +1,26 @@ 
+DESCRIPTION = "This is a modified version of the icecc-create-env script in order to\
+make it work with OE."
+SECTION = "base"
+# source file has just a "GPL" word, but upstream is GPLv2+.
+# most probably just GPL would be a mistake
+LICENSE = "GPLv2+"
+LIC_FILES_CHKSUM = "file://icecc-create-env;beginline=2;endline=5;md5=ae1df3d6a058bfda40b66094c5f6065f"
+
+PR = "r0"
+
+DEPENDS = ""
+INHIBIT_DEFAULT_DEPS = "1"
+
+FILESPATH = "${FILE_DIRNAME}/${PN}/"
+
+inherit native
+
+PATCHTOOL = "patch"
+SRC_URI = "file://icecc-create-env"
+
+S = "${WORKDIR}"
+
+do_install() {
+    install -d ${D}/${bindir}
+    install -m 0755 ${WORKDIR}/icecc-create-env ${D}/${bindir}
+}