Patchwork [meta-fsl-arm-extra,1/3] imx6qsabrelite: Remove specific setup and turn it as an alias to Nitrogen6X

login
register
mail settings
Submitter Otavio Salvador
Date July 2, 2013, 7:35 p.m.
Message ID <1372793748-4062-1-git-send-email-otavio@ossystems.com.br>
Download mbox | patch
Permalink /patch/52839/
State Accepted
Delegated to: Otavio Salvador
Headers show

Comments

Otavio Salvador - July 2, 2013, 7:35 p.m.
This board now use the *same* code as Nitrogen6X and it boots from
internal SPI NOR memory. If you did change it to boot from the MMC
(SD3 or SD4) please check the Boundary's blog post at:

  http://boundarydevices.com/u-boot-on-i-mx6/#unbricking

Change-Id: I5ec3444afee65002f94c2d2de40662749e5a9070
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
 conf/machine/imx6qsabrelite.conf | 18 +++++-------------
 1 file changed, 5 insertions(+), 13 deletions(-)
Eric Nelson - July 2, 2013, 9:54 p.m.
On 07/02/2013 12:35 PM, Otavio Salvador wrote:
> This board now use the *same* code as Nitrogen6X and it boots from
> internal SPI NOR memory. If you did change it to boot from the MMC
> (SD3 or SD4) please check the Boundary's blog post at:
>
>    http://boundarydevices.com/u-boot-on-i-mx6/#unbricking
>
> Change-Id: I5ec3444afee65002f94c2d2de40662749e5a9070
> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
> ---
>   conf/machine/imx6qsabrelite.conf | 18 +++++-------------
>   1 file changed, 5 insertions(+), 13 deletions(-)
>
> diff --git a/conf/machine/imx6qsabrelite.conf b/conf/machine/imx6qsabrelite.conf
> index 2155ba0..14409fb 100644
> --- a/conf/machine/imx6qsabrelite.conf
> +++ b/conf/machine/imx6qsabrelite.conf
> @@ -3,17 +3,9 @@
>   #@SOC: i.MX6Q
>   #@DESCRIPTION: Machine configuration for Boundary Devices i.MX6Q SABRE Lite
>
> -include conf/machine/include/imx-base.inc
> -include conf/machine/include/tune-cortexa9.inc
> +# WARNING: This board now use the *same* code as Nitrogen6X and it
> +#          boots from internal SPI NOR memory. If you did change it to boot
> +#          from the MMC (SD3 or SD4) please check the Boundary's blog post
> +#          at: http://boundarydevices.com/u-boot-on-i-mx6/#unbricking
>
> -SOC_FAMILY = "mx6:mx6q"
> -
> -KERNEL_DEVICETREE = "${S}/arch/arm/boot/dts/imx6q-sabrelite.dts"
> -
> -PREFERRED_PROVIDER_virtual/kernel = "linux-boundary"
> -
> -UBOOT_MACHINE = "mx6qsabrelite_config"
> -
> -SERIAL_CONSOLE = "115200 ttymxc1"
> -
> -MACHINE_FEATURES += " pci wifi bluetooth"
> +include conf/machine/nitrogen6x.conf
>

Acked-by: Eric Nelson <eric.nelson@boundarydevices.com>

Patch

diff --git a/conf/machine/imx6qsabrelite.conf b/conf/machine/imx6qsabrelite.conf
index 2155ba0..14409fb 100644
--- a/conf/machine/imx6qsabrelite.conf
+++ b/conf/machine/imx6qsabrelite.conf
@@ -3,17 +3,9 @@ 
 #@SOC: i.MX6Q
 #@DESCRIPTION: Machine configuration for Boundary Devices i.MX6Q SABRE Lite
 
-include conf/machine/include/imx-base.inc
-include conf/machine/include/tune-cortexa9.inc
+# WARNING: This board now use the *same* code as Nitrogen6X and it
+#          boots from internal SPI NOR memory. If you did change it to boot
+#          from the MMC (SD3 or SD4) please check the Boundary's blog post
+#          at: http://boundarydevices.com/u-boot-on-i-mx6/#unbricking
 
-SOC_FAMILY = "mx6:mx6q"
-
-KERNEL_DEVICETREE = "${S}/arch/arm/boot/dts/imx6q-sabrelite.dts"
-
-PREFERRED_PROVIDER_virtual/kernel = "linux-boundary"
-
-UBOOT_MACHINE = "mx6qsabrelite_config"
-
-SERIAL_CONSOLE = "115200 ttymxc1"
-
-MACHINE_FEATURES += " pci wifi bluetooth"
+include conf/machine/nitrogen6x.conf