Patchwork [8/9] meta-yocto: Document new oe-git-proxy in site.conf.sample

login
register
mail settings
Submitter Darren Hart
Date Feb. 5, 2013, 10:52 p.m.
Message ID <9e352d99316c5f8130db240d670c604b48b261ac.1360104547.git.dvhart@linux.intel.com>
Download mbox | patch
Permalink /patch/44177/
State New
Headers show

Comments

Darren Hart - Feb. 5, 2013, 10:52 p.m.
The new oe-git-proxy.sh should address all git proxying needs. Document
its usage in meta-yocto/conf/site.conf.sample and remove references to
the old mechanisms.

V2: Separate out the meta-yocto changes from the oe-core changes

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
---
 meta-yocto/conf/site.conf.sample |   35 +++++++++--------------------------
 1 files changed, 9 insertions(+), 26 deletions(-)
Otavio Salvador - Feb. 6, 2013, 12:24 a.m.
On Tue, Feb 5, 2013 at 8:52 PM, Darren Hart <dvhart@linux.intel.com> wrote:
> The new oe-git-proxy.sh should address all git proxying needs. Document
> its usage in meta-yocto/conf/site.conf.sample and remove references to
> the old mechanisms.
>
> V2: Separate out the meta-yocto changes from the oe-core changes
>
> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
> ---
>  meta-yocto/conf/site.conf.sample |   35 +++++++++--------------------------
>  1 files changed, 9 insertions(+), 26 deletions(-)
>
> diff --git a/meta-yocto/conf/site.conf.sample b/meta-yocto/conf/site.conf.sample
> index 68d1da9..2834702 100644
> --- a/meta-yocto/conf/site.conf.sample
> +++ b/meta-yocto/conf/site.conf.sample
> @@ -16,32 +16,15 @@ SCONF_VERSION = "1"
>  #http-proxy-port = 81
>  #
>
> -# Uncomment to cause git to use the proxy host specificed
> -# although this only works for http
> -#GIT_PROXY_HOST = "proxy.example.com"
> -#GIT_PROXY_PORT = "81"
> -#export GIT_PROXY_COMMAND = "${COREBASE}/scripts/oe-git-proxy-command"
> -
> -# Set to yes to have a gitconfig generated for handling proxies; you
> -# might not want this if you have all that set in your global git
> -# configuration. If you don't enable it, the rest of the entries
> -# (_PROXY_IGNORE, etc) don't really work that well
> -#GIT_CORE_CONFIG = "Yes"
> -
> -# Space separate list of hosts to ignore for GIT proxy
> -#GIT_PROXY_IGNORE = "host.server.com another.server.com"
> -
> -# If SOCKS is available run the following command to comple a simple transport
> -# gcc scripts/oe-git-proxy-socks.c -o oe-git-proxy-socks
> -# and then share that binary somewhere in PATH, then use the following settings
> -#GIT_PROXY_HOST = "proxy.example.com"
> -#GIT_PROXY_PORT = "81"
> -
> -# GIT_PROXY_COMMAND is used by git to override all proxy settings from
> -# configuration files, so we prefix OE_ to avoid breaking havoc on the
> -# generated (or local) gitconfig's.
> -#OE_GIT_PROXY_COMMAND = "${COREBASE}/scripts/oe-git-proxy-socks-command"
> -
> +# To use git with a proxy, you must use an external git proxy command, such as
> +# the one provided by scripts/oe-git-proxy.sh. To use this script, copy it to
> +# your PATH and uncomment the following:
> +#GIT_PROXY_COMMAND="oe-git-proxy.sh"

.sh

A similar change ought to be done for oe-core .sample, no?

> +#ALL_PROXY="socks://socks.example.com:1080"
> +#or
> +#ALL_PROXY="https://proxy.example.com:8080"
> +# If you wish to use certain hosts without the proxy, specify them in NO_PROXY.
> +# See the script for details on syntax.
>
>  # Uncomment this to use a shared download directory
>  #DL_DIR = "/some/shared/download/directory/"
> --
> 1.7.5.4
>
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core



--
Otavio Salvador                             O.S. Systems
E-mail: otavio@ossystems.com.br  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br
Darren Hart - Feb. 6, 2013, 12:29 a.m.
On 02/05/2013 04:24 PM, Otavio Salvador wrote:
> On Tue, Feb 5, 2013 at 8:52 PM, Darren Hart <dvhart@linux.intel.com> wrote:
>> The new oe-git-proxy.sh should address all git proxying needs. Document
>> its usage in meta-yocto/conf/site.conf.sample and remove references to
>> the old mechanisms.
>>
>> V2: Separate out the meta-yocto changes from the oe-core changes
>>
>> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
>> ---
>>  meta-yocto/conf/site.conf.sample |   35 +++++++++--------------------------
>>  1 files changed, 9 insertions(+), 26 deletions(-)
>>
>> diff --git a/meta-yocto/conf/site.conf.sample b/meta-yocto/conf/site.conf.sample
>> index 68d1da9..2834702 100644
>> --- a/meta-yocto/conf/site.conf.sample
>> +++ b/meta-yocto/conf/site.conf.sample
>> @@ -16,32 +16,15 @@ SCONF_VERSION = "1"
>>  #http-proxy-port = 81
>>  #
>>
>> -# Uncomment to cause git to use the proxy host specificed
>> -# although this only works for http
>> -#GIT_PROXY_HOST = "proxy.example.com"
>> -#GIT_PROXY_PORT = "81"
>> -#export GIT_PROXY_COMMAND = "${COREBASE}/scripts/oe-git-proxy-command"
>> -
>> -# Set to yes to have a gitconfig generated for handling proxies; you
>> -# might not want this if you have all that set in your global git
>> -# configuration. If you don't enable it, the rest of the entries
>> -# (_PROXY_IGNORE, etc) don't really work that well
>> -#GIT_CORE_CONFIG = "Yes"
>> -
>> -# Space separate list of hosts to ignore for GIT proxy
>> -#GIT_PROXY_IGNORE = "host.server.com another.server.com"
>> -
>> -# If SOCKS is available run the following command to comple a simple transport
>> -# gcc scripts/oe-git-proxy-socks.c -o oe-git-proxy-socks
>> -# and then share that binary somewhere in PATH, then use the following settings
>> -#GIT_PROXY_HOST = "proxy.example.com"
>> -#GIT_PROXY_PORT = "81"
>> -
>> -# GIT_PROXY_COMMAND is used by git to override all proxy settings from
>> -# configuration files, so we prefix OE_ to avoid breaking havoc on the
>> -# generated (or local) gitconfig's.
>> -#OE_GIT_PROXY_COMMAND = "${COREBASE}/scripts/oe-git-proxy-socks-command"
>> -
>> +# To use git with a proxy, you must use an external git proxy command, such as
>> +# the one provided by scripts/oe-git-proxy.sh. To use this script, copy it to
>> +# your PATH and uncomment the following:
>> +#GIT_PROXY_COMMAND="oe-git-proxy.sh"
> 
> .sh

Fixed

> A similar change ought to be done for oe-core .sample, no?

I didn't see any git proxy documentation there and no conf.sample files
in oe-core at all. Perhaps someone would like to add a site.conf.sample
for oe-core?

Patch

diff --git a/meta-yocto/conf/site.conf.sample b/meta-yocto/conf/site.conf.sample
index 68d1da9..2834702 100644
--- a/meta-yocto/conf/site.conf.sample
+++ b/meta-yocto/conf/site.conf.sample
@@ -16,32 +16,15 @@  SCONF_VERSION = "1"
 #http-proxy-port = 81
 #
 
-# Uncomment to cause git to use the proxy host specificed 
-# although this only works for http
-#GIT_PROXY_HOST = "proxy.example.com"
-#GIT_PROXY_PORT = "81"
-#export GIT_PROXY_COMMAND = "${COREBASE}/scripts/oe-git-proxy-command"
-
-# Set to yes to have a gitconfig generated for handling proxies; you
-# might not want this if you have all that set in your global git
-# configuration. If you don't enable it, the rest of the entries
-# (_PROXY_IGNORE, etc) don't really work that well
-#GIT_CORE_CONFIG = "Yes"
-
-# Space separate list of hosts to ignore for GIT proxy
-#GIT_PROXY_IGNORE = "host.server.com another.server.com"
-
-# If SOCKS is available run the following command to comple a simple transport
-# gcc scripts/oe-git-proxy-socks.c -o oe-git-proxy-socks
-# and then share that binary somewhere in PATH, then use the following settings
-#GIT_PROXY_HOST = "proxy.example.com"
-#GIT_PROXY_PORT = "81"
-
-# GIT_PROXY_COMMAND is used by git to override all proxy settings from
-# configuration files, so we prefix OE_ to avoid breaking havoc on the
-# generated (or local) gitconfig's.
-#OE_GIT_PROXY_COMMAND = "${COREBASE}/scripts/oe-git-proxy-socks-command"
-
+# To use git with a proxy, you must use an external git proxy command, such as
+# the one provided by scripts/oe-git-proxy.sh. To use this script, copy it to
+# your PATH and uncomment the following:
+#GIT_PROXY_COMMAND="oe-git-proxy.sh"
+#ALL_PROXY="socks://socks.example.com:1080"
+#or
+#ALL_PROXY="https://proxy.example.com:8080"
+# If you wish to use certain hosts without the proxy, specify them in NO_PROXY.
+# See the script for details on syntax.
 
 # Uncomment this to use a shared download directory
 #DL_DIR = "/some/shared/download/directory/"