Patchwork [CONSOLIDATED,PULL,[v2] 09/14] adt-installer: Fixed ppc kernel naming.

login
register
mail settings
Submitter Saul Wold
Date April 10, 2012, 7:26 a.m.
Message ID <0218f4d54e92eeef1d27afe7325be8a5b49bc894.1334042473.git.sgw@linux.intel.com>
Download mbox | patch
Permalink /patch/25513/
State New
Headers show

Comments

Saul Wold - April 10, 2012, 7:26 a.m.
From: Lianhao Lu <lianhao.lu@intel.com>

1. Fixed the ppc kernel naming.
2. Disabled opkg shared library to avoid runtime opkg-cl launching
error.
3. Adjusted the variable sequence in adt-installer.conf

Fixed bug [YOCTO #2233]

Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
---
 .../installer/adt-installer/adt_installer          |    4 ++--
 .../installer/adt-installer/adt_installer.conf     |   20 ++++++++++----------
 .../installer/adt-installer_1.0.bb                 |    2 +-
 3 files changed, 13 insertions(+), 13 deletions(-)

Patch

diff --git a/meta/recipes-devtools/installer/adt-installer/adt_installer b/meta/recipes-devtools/installer/adt-installer/adt_installer
index 1dd07b7..1a53eb9 100755
--- a/meta/recipes-devtools/installer/adt-installer/adt_installer
+++ b/meta/recipes-devtools/installer/adt-installer/adt_installer
@@ -170,7 +170,7 @@  if [ ! -x "$LOCAL_OPKG_LOC/bin/opkg-cl" ]; then
   check_result
 
   echo_info "Configure opkg ...\n"
-  ./autogen.sh --prefix=$parent_folder/$LOCAL_OPKG_LOC --with-opkglibdir=$OPKG_LIBDIR --disable-curl --disable-ssl-curl --disable-gpg --disable-shave >> $parent_folder/$YOCTOADT_INSTALL_LOG_FILE
+  ./autogen.sh --prefix=$parent_folder/$LOCAL_OPKG_LOC --with-opkglibdir=$OPKG_LIBDIR --enable-shared=no --disable-curl --disable-ssl-curl --disable-gpg --disable-shave >> $parent_folder/$YOCTOADT_INSTALL_LOG_FILE
   check_result
 
   echo_info "Make opkg ...\n"
@@ -241,7 +241,7 @@  get_qemu_image()
 
   if [ "$1" == "x86" ] || [ "$1" == "x86_64" ]; then
     qemu_kernel="bzImage-qemu$target.bin"
-  elif [ "$1" == "mips" ]; then
+  elif [ "$1" == "ppc" ] || [ "$1" == "mips" ]; then
     qemu_kernel="vmlinux-qemu$target.bin"
   else
     qemu_kernel="zImage-qemu$target.bin"
diff --git a/meta/recipes-devtools/installer/adt-installer/adt_installer.conf b/meta/recipes-devtools/installer/adt-installer/adt_installer.conf
index 275756e..afc69a4 100644
--- a/meta/recipes-devtools/installer/adt-installer/adt_installer.conf
+++ b/meta/recipes-devtools/installer/adt-installer/adt_installer.conf
@@ -42,7 +42,7 @@  YOCTOADT_NFS_UTIL="Y"
 #YOCTOADT_ROOTFS_$arch is for specifying what root filesystem image files you want to download from the repository. The valid values to replace $arch are: arm, x86, x86_64, powerpc, mips.  The valid image files are: minimal, minimal-dev, sato, sato-dev, sato-sdk,lsb, lsb-dev, lsb-sdk.  If you want to download multiple images, the entries are space separated
 YOCTOADT_ROOTFS_arm="minimal sato-sdk"
 #Specify which root filesystem file to use to extract as target sysroot.  Please ensure the entry is in the list of downloaded root filesystem files that specified above in YOCTOADT_ROOTFS_$arch
-YOCTOADT_TARGET_SYSROOT_IMAGE_arm="minimal"
+YOCTOADT_TARGET_SYSROOT_IMAGE_arm="sato-sdk"
 #The location where the target sysroot will be setup
 YOCTOADT_TARGET_SYSROOT_LOC_arm="$HOME/test-yocto/arm"
 
@@ -52,14 +52,14 @@  YOCTOADT_TARGET_SYSROOT_LOC_arm="$HOME/test-yocto/arm"
 #YOCTOADT_TARGET_SYSROOT_LOC_x86="$HOME/test-yocto/x86"
 
 #Here's some template of other arches, which you need to change the value in ""
-#YOCTOADT_TARGET_SYSROOT_IMAGE_x86_64=""
-#YOCTOADT_TARGET_SYSROOT_LOC_x86_64=""
-#YOCTOADT_ROOTFS_x86_64=""
+#YOCTOADT_ROOTFS_x86_64="sato-sdk"
+#YOCTOADT_TARGET_SYSROOT_IMAGE_x86_64="sato-sdk"
+#YOCTOADT_TARGET_SYSROOT_LOC_x86_64="$HOME/test-yocto/x86_64"
 
-#YOCTOADT_TARGET_SYSROOT_IMAGE_ppc=""
-#YOCTOADT_TARGET_SYSROOT_LOC_ppc=""
-#YOCTOADT_ROOTFS_ppc=""
+#YOCTOADT_ROOTFS_ppc="sato-sdk"
+#YOCTOADT_TARGET_SYSROOT_IMAGE_ppc="sato-sdk"
+#YOCTOADT_TARGET_SYSROOT_LOC_ppc="$HOME/test-yocto/ppc"
 
-#YOCTOADT_TARGET_SYSROOT_IMAGE_mips=""
-#YOCTOADT_TARGET_SYSROOT_LOC_mips=""
-#YOCTOADT_ROOTFS_mips=""
+#YOCTOADT_ROOTFS_mips="sato-sdk"
+#YOCTOADT_TARGET_SYSROOT_IMAGE_mips="sato-sdk"
+#YOCTOADT_TARGET_SYSROOT_LOC_mips="$HOME/test-yocto/mips"
diff --git a/meta/recipes-devtools/installer/adt-installer_1.0.bb b/meta/recipes-devtools/installer/adt-installer_1.0.bb
index 07bef88..5dc0896 100644
--- a/meta/recipes-devtools/installer/adt-installer_1.0.bb
+++ b/meta/recipes-devtools/installer/adt-installer_1.0.bb
@@ -30,7 +30,7 @@  ALLOW_EMPTY = "1"
 
 PACKAGES = ""
 
-PR = "r8"
+PR = "r9"
 
 ADT_DEPLOY = "${TMPDIR}/deploy/sdk/"
 ADT_DIR = "${WORKDIR}/adt-installer/"