diff mbox series

[1/2] kernel-fitimage: support 64 bits address

Message ID 20230413101142.5532-2-jamin_lin@aspeedtech.com
State New
Headers show
Series kernel-fitimage/uboot-sign: support 64bits address | expand

Commit Message

Jamin Lin April 13, 2023, 10:11 a.m. UTC 
The default value of address-cells is "1", so the generated "its" file
only supports 32bits address for kernel FIT image.
However, some platforms may want to support 64bits address
of UBOOT_LOADADDRESS and UBOOT_ENTRYPOINT.
Therefore, adds a variable to support both 64bits and 32bits address cells.

By default, the address-cell is "1" which is used for 32bits load address.
If users would like to use 64bits load address, users are able to
set as following for "0x400000000" 64bits load address.
1. FIT_ADDRESS_CELLS = "2"
2. UBOOT_LOADADDRESS= "0x04 0x00000000"

(From OE-Core rev: f79046d082f3a7752e6780b2990470dcd36cbba4)

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 meta/classes-recipe/kernel-fitimage.bbclass | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/meta/classes-recipe/kernel-fitimage.bbclass b/meta/classes-recipe/kernel-fitimage.bbclass
index b77747404f..d294f28d17 100644
--- a/meta/classes-recipe/kernel-fitimage.bbclass
+++ b/meta/classes-recipe/kernel-fitimage.bbclass
@@ -92,6 +92,10 @@  FIT_SUPPORTED_INITRAMFS_FSTYPES ?= "cpio.lz4 cpio.lzo cpio.lzma cpio.xz cpio.zst
 # Allow user to select the default DTB for FIT image when multiple dtb's exists.
 FIT_CONF_DEFAULT_DTB ?= ""
 
+# length of address in number of <u32> cells
+# ex: 1 32bits address, 2 64bits address
+FIT_ADDRESS_CELLS ?= "1"
+
 # Keys used to sign individually image nodes.
 # The keys to sign image nodes must be different from those used to sign
 # configuration nodes, otherwise the "required" property, from
@@ -110,7 +114,7 @@  fitimage_emit_fit_header() {
 
 / {
         description = "${FIT_DESC}";
-        #address-cells = <1>;
+        #address-cells = <${FIT_ADDRESS_CELLS}>;
 EOF
 }