Patchwork Net::SSLeay perl extension OpenSSL

login
register
mail settings
Submitter Khem Raj
Date Jan. 26, 2012, 12:36 a.m.
Message ID <20120126003644.GA4973@sakrah.homelinux.org>
Download mbox | patch
Permalink /patch/20169/
State New
Headers show

Comments

Khem Raj - Jan. 26, 2012, 12:36 a.m.
On (25/01/12 14:50), simran singh wrote:
> 
> Hello,
> 
> I am not sure if this is the right list.
> 
> Trying to add Net::SSLeay perl module, I get the following error.
> 

Please try attached patch. I have not tested it



> 
> 
>  NOTE: Running task 204 of 315 (ID: 11, 
> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/
> 
> net-ssleay/net-ssleay_1.36.bb, do_compile)
> 
> ERROR: TaskFailed event exception, aborting
> 
> ERROR: Build of 
> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb
> 
>  do_compile failed
> 
> ERROR: Task 11 
> (/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb,
> 
>  do_compile) failed with 256
> 
> ERROR: 
> '/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb'
>  failed
> 
> NOTE: package net-ssleay-1.36-r0: task do_compile: Started
> 
> ERROR: Function do_compile failed
> 
> NOTE: Task failed: ('function do_compile failed', 
> '/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/work/
> 
> ppce500mc-linux/net-ssleay-1.36-r0/temp/log.do_compile.22680')
> 
> ERROR: Logfile of failure stored in: 
> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/work/ppce500mc-
> 
> linux/net-ssleay-1.36-r0/temp/log.do_compile.22680
> 
> Log data follows:
> 
> | NOTE: make -j 2 -e MAKEFLAGS= PASTHRU_INC= -fexpensive-optimizations 
> -frename-registers -fomit-frame-pointer -O2 -g0 CCFLAGS= -fexpensive
> 
> -optimizations -frename-registers -fomit-frame-pointer -O2 -g0 
> LD=powerpc-linux-gnu-gcc -mcpu=e500mc -maix-struct-return 
> --sysroot=/home/Simran/
> 
> Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/sysroots/ppce500mc-linux
> 
> | Can't locate ExtUtils/Command.pm in @INC (@INC contains: inc 
> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release
> 
> /sysroots/i686-linux/usr/lib/perl/5.10.1 
> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib
> 
> /perl/5.10.1 
> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl/5.10.1
> 
>  /home/
> 
> jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl .).
> 
> | BEGIN failed--compilation aborted.
> 
> | make: *** [blib/lib/Net/.exists] Error 2
> 
> | make: *** Waiting for unfinished jobs....
> 
> | Can't locate ExtUtils/Command.pm in @INC (@INC contains: inc 
> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/
> 
> build_p1023rds_release/sysroots/i686-linux/usr/lib/perl/5.10.1 
> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release
> 
> /sysroots/i686-linux/usr/lib/perl/5.10.1 
> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr
> 
> /lib/perl/5.10.1 
> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl
>  .).
> 
> | BEGIN failed--compilation aborted.
> 
> | make: *** [blib/arch/.exists] Error 2
> 
> | FATAL: oe_runmake failed
> 
> | ERROR: Function do_compile failed
> 
> NOTE: package net-ssleay-1.36-r0: task do_compile: Failed
> 
> ERROR: TaskFailed event exception, aborting
> 
> 
> 
> 
> 
> I used the libnet-ssleay-perl_1.36.bb, I found in the oe-commit archive.
> 
> Please advice and thanks.
> 
> 
> 
> Sim Gill 		 	   		   		 	   		  


> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
simran singh - Jan. 26, 2012, 12:50 a.m.
Hello Raj,

Thanks for the reply.
I do not have the file named "libnet-ssleay-license". Where can I obtain this?
If I try to build without that file, I get the same error about command.pm.


Date: Wed, 25 Jan 2012 16:36:44 -0800
From: raj.khem@gmail.com
To: openembedded-core@lists.openembedded.org
Subject: Re: [OE-core] Net::SSLeay perl extension OpenSSL

On (25/01/12 14:50), simran singh wrote:
> 
> Hello,
> 
> I am not sure if this is the right list.
> 
> Trying to add Net::SSLeay perl module, I get the following error.
> 
 
Please try attached patch. I have not tested it
 
 
 
> 
> 
>  NOTE: Running task 204 of 315 (ID: 11, 
> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/
> 
> net-ssleay/net-ssleay_1.36.bb, do_compile)
> 
> ERROR: TaskFailed event exception, aborting
> 
> ERROR: Build of 
> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb
> 
>  do_compile failed
> 
> ERROR: Task 11 
> (/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb,
> 
>  do_compile) failed with 256
> 
> ERROR: 
> '/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb'
>  failed
> 
> NOTE: package net-ssleay-1.36-r0: task do_compile: Started
> 
> ERROR: Function do_compile failed
> 
> NOTE: Task failed: ('function do_compile failed', 
> '/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/work/
> 
> ppce500mc-linux/net-ssleay-1.36-r0/temp/log.do_compile.22680')
> 
> ERROR: Logfile of failure stored in: 
> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/work/ppce500mc-
> 
> linux/net-ssleay-1.36-r0/temp/log.do_compile.22680
> 
> Log data follows:
> 
> | NOTE: make -j 2 -e MAKEFLAGS= PASTHRU_INC= -fexpensive-optimizations 
> -frename-registers -fomit-frame-pointer -O2 -g0 CCFLAGS= -fexpensive
> 
> -optimizations -frename-registers -fomit-frame-pointer -O2 -g0 
> LD=powerpc-linux-gnu-gcc -mcpu=e500mc -maix-struct-return 
> --sysroot=/home/Simran/
> 
> Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/sysroots/ppce500mc-linux
> 
> | Can't locate ExtUtils/Command.pm in @INC (@INC contains: inc 
> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release
> 
> /sysroots/i686-linux/usr/lib/perl/5.10.1 
> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib
> 
> /perl/5.10.1 
> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl/5.10.1
> 
>  /home/
> 
> jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl .).
> 
> | BEGIN failed--compilation aborted.
> 
> | make: *** [blib/lib/Net/.exists] Error 2
> 
> | make: *** Waiting for unfinished jobs....
> 
> | Can't locate ExtUtils/Command.pm in @INC (@INC contains: inc 
> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/
> 
> build_p1023rds_release/sysroots/i686-linux/usr/lib/perl/5.10.1 
> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release
> 
> /sysroots/i686-linux/usr/lib/perl/5.10.1 
> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr
> 
> /lib/perl/5.10.1 
> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl
>  .).
> 
> | BEGIN failed--compilation aborted.
> 
> | make: *** [blib/arch/.exists] Error 2
> 
> | FATAL: oe_runmake failed
> 
> | ERROR: Function do_compile failed
> 
> NOTE: package net-ssleay-1.36-r0: task do_compile: Failed
> 
> ERROR: TaskFailed event exception, aborting
> 
> 
> 
> 
> 
> I used the libnet-ssleay-perl_1.36.bb, I found in the oe-commit archive.
> 
> Please advice and thanks.
> 
> 
> 
> Sim Gill 		 	   		   		 	   		  
 
 
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
Khem Raj - Jan. 26, 2012, 1:49 a.m.
On Wed, Jan 25, 2012 at 4:50 PM, simran singh <kyoonn@hotmail.com> wrote:
>
> Hello Raj,
>
> Thanks for the reply.
> I do not have the file named "libnet-ssleay-license". Where can I obtain
> this?
> If I try to build without that file, I get the same error about command.pm.

Did you apply the patch properly ?

save the patch and cd into openembedded-core
and then git am <patchfile>
>
>
> Date: Wed, 25 Jan 2012 16:36:44 -0800
> From: raj.khem@gmail.com
> To: openembedded-core@lists.openembedded.org
> Subject: Re: [OE-core] Net::SSLeay perl extension OpenSSL
>
>
> On (25/01/12 14:50), simran singh wrote:
>>
>> Hello,
>>
>> I am not sure if this is the right list.
>>
>> Trying to add Net::SSLeay perl module, I get the following error.
>>
>
> Please try attached patch. I have not tested it
>
>
>
>>
>>
>>  NOTE: Running task 204 of 315 (ID: 11,
>>
>> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/
>>
>> net-ssleay/net-ssleay_1.36.bb, do_compile)
>>
>> ERROR: TaskFailed event exception, aborting
>>
>> ERROR: Build of
>>
>> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb
>>
>>  do_compile failed
>>
>> ERROR: Task 11
>>
>> (/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb,
>>
>>  do_compile) failed with 256
>>
>> ERROR:
>>
>> '/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb'
>>  failed
>>
>> NOTE: package net-ssleay-1.36-r0: task do_compile: Started
>>
>> ERROR: Function do_compile failed
>>
>> NOTE: Task failed: ('function do_compile failed',
>>
>> '/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/work/
>>
>> ppce500mc-linux/net-ssleay-1.36-r0/temp/log.do_compile.22680')
>>
>> ERROR: Logfile of failure stored in:
>>
>> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/work/ppce500mc-
>>
>> linux/net-ssleay-1.36-r0/temp/log.do_compile.22680
>>
>> Log data follows:
>>
>> | NOTE: make -j 2 -e MAKEFLAGS= PASTHRU_INC= -fexpensive-optimizations
>> -frename-registers -fomit-frame-pointer -O2 -g0 CCFLAGS= -fexpensive
>>
>> -optimizations -frename-registers -fomit-frame-pointer -O2 -g0
>> LD=powerpc-linux-gnu-gcc -mcpu=e500mc -maix-struct-return
>> --sysroot=/home/Simran/
>>
>>
>> Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/sysroots/ppce500mc-linux
>>
>> | Can't locate ExtUtils/Command.pm in @INC (@INC contains: inc
>>
>> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release
>>
>> /sysroots/i686-linux/usr/lib/perl/5.10.1
>>
>> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib
>>
>> /perl/5.10.1
>>
>> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl/5.10.1
>>
>>  /home/
>>
>>
>> jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl
>> .).
>>
>> | BEGIN failed--compilation aborted.
>>
>> | make: *** [blib/lib/Net/.exists] Error 2
>>
>> | make: *** Waiting for unfinished jobs....
>>
>> | Can't locate ExtUtils/Command.pm in @INC (@INC contains: inc
>> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/
>>
>> build_p1023rds_release/sysroots/i686-linux/usr/lib/perl/5.10.1
>>
>> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release
>>
>> /sysroots/i686-linux/usr/lib/perl/5.10.1
>>
>> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr
>>
>> /lib/perl/5.10.1
>>
>> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl
>>  .).
>>
>> | BEGIN failed--compilation aborted.
>>
>> | make: *** [blib/arch/.exists] Error 2
>>
>> | FATAL: oe_runmake failed
>>
>> | ERROR: Function do_compile failed
>>
>> NOTE: package net-ssleay-1.36-r0: task do_compile: Failed
>>
>> ERROR: TaskFailed event exception, aborting
>>
>>
>>
>>
>>
>> I used the libnet-ssleay-perl_1.36.bb, I found in the oe-commit archive.
>>
>> Please advice and thanks.
>>
>>
>>
>> Sim Gill 		 	   		   		 	   		
>
>
>> _______________________________________________
>> Openembedded-core mailing list
>> Openembedded-core@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
>
> --
> -Khem
>
>
> _______________________________________________ Openembedded-core mailing
> list Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
simran singh - Jan. 27, 2012, 4:41 p.m.
Hello Raj,

I am using open embedded provided through a company instead of downloading from the git repository. Is there a way 
to apply this patch manually without going through git?.
I tried 'bitbake patch filename' but that did not work.
Thanks a bunch for your help.

Sim  

> From: raj.khem@gmail.com
> Date: Wed, 25 Jan 2012 17:49:48 -0800
> To: openembedded-core@lists.openembedded.org
> Subject: Re: [OE-core] Net::SSLeay perl extension OpenSSL
> 
> On Wed, Jan 25, 2012 at 4:50 PM, simran singh <kyoonn@hotmail.com> wrote:
> >
> > Hello Raj,
> >
> > Thanks for the reply.
> > I do not have the file named "libnet-ssleay-license". Where can I obtain
> > this?
> > If I try to build without that file, I get the same error about command.pm.
> 
> Did you apply the patch properly ?
> 
> save the patch and cd into openembedded-core
> and then git am <patchfile>
> >
> >
> > Date: Wed, 25 Jan 2012 16:36:44 -0800
> > From: raj.khem@gmail.com
> > To: openembedded-core@lists.openembedded.org
> > Subject: Re: [OE-core] Net::SSLeay perl extension OpenSSL
> >
> >
> > On (25/01/12 14:50), simran singh wrote:
> >>
> >> Hello,
> >>
> >> I am not sure if this is the right list.
> >>
> >> Trying to add Net::SSLeay perl module, I get the following error.
> >>
> >
> > Please try attached patch. I have not tested it
> >
> >
> >
> >>
> >>
> >>  NOTE: Running task 204 of 315 (ID: 11,
> >>
> >> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/
> >>
> >> net-ssleay/net-ssleay_1.36.bb, do_compile)
> >>
> >> ERROR: TaskFailed event exception, aborting
> >>
> >> ERROR: Build of
> >>
> >> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb
> >>
> >>  do_compile failed
> >>
> >> ERROR: Task 11
> >>
> >> (/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb,
> >>
> >>  do_compile) failed with 256
> >>
> >> ERROR:
> >>
> >> '/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb'
> >>  failed
> >>
> >> NOTE: package net-ssleay-1.36-r0: task do_compile: Started
> >>
> >> ERROR: Function do_compile failed
> >>
> >> NOTE: Task failed: ('function do_compile failed',
> >>
> >> '/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/work/
> >>
> >> ppce500mc-linux/net-ssleay-1.36-r0/temp/log.do_compile.22680')
> >>
> >> ERROR: Logfile of failure stored in:
> >>
> >> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/work/ppce500mc-
> >>
> >> linux/net-ssleay-1.36-r0/temp/log.do_compile.22680
> >>
> >> Log data follows:
> >>
> >> | NOTE: make -j 2 -e MAKEFLAGS= PASTHRU_INC= -fexpensive-optimizations
> >> -frename-registers -fomit-frame-pointer -O2 -g0 CCFLAGS= -fexpensive
> >>
> >> -optimizations -frename-registers -fomit-frame-pointer -O2 -g0
> >> LD=powerpc-linux-gnu-gcc -mcpu=e500mc -maix-struct-return
> >> --sysroot=/home/Simran/
> >>
> >>
> >> Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/sysroots/ppce500mc-linux
> >>
> >> | Can't locate ExtUtils/Command.pm in @INC (@INC contains: inc
> >>
> >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release
> >>
> >> /sysroots/i686-linux/usr/lib/perl/5.10.1
> >>
> >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib
> >>
> >> /perl/5.10.1
> >>
> >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl/5.10.1
> >>
> >>  /home/
> >>
> >>
> >> jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl
> >> .).
> >>
> >> | BEGIN failed--compilation aborted.
> >>
> >> | make: *** [blib/lib/Net/.exists] Error 2
> >>
> >> | make: *** Waiting for unfinished jobs....
> >>
> >> | Can't locate ExtUtils/Command.pm in @INC (@INC contains: inc
> >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/
> >>
> >> build_p1023rds_release/sysroots/i686-linux/usr/lib/perl/5.10.1
> >>
> >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release
> >>
> >> /sysroots/i686-linux/usr/lib/perl/5.10.1
> >>
> >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr
> >>
> >> /lib/perl/5.10.1
> >>
> >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl
> >>  .).
> >>
> >> | BEGIN failed--compilation aborted.
> >>
> >> | make: *** [blib/arch/.exists] Error 2
> >>
> >> | FATAL: oe_runmake failed
> >>
> >> | ERROR: Function do_compile failed
> >>
> >> NOTE: package net-ssleay-1.36-r0: task do_compile: Failed
> >>
> >> ERROR: TaskFailed event exception, aborting
> >>
> >>
> >>
> >>
> >>
> >> I used the libnet-ssleay-perl_1.36.bb, I found in the oe-commit archive.
> >>
> >> Please advice and thanks.
> >>
> >>
> >>
> >> Sim Gill 		 	   		   		 	   		
> >
> >
> >> _______________________________________________
> >> Openembedded-core mailing list
> >> Openembedded-core@lists.openembedded.org
> >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> >
> >
> > --
> > -Khem
> >
> >
> > _______________________________________________ Openembedded-core mailing
> > list Openembedded-core@lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> >
> > _______________________________________________
> > Openembedded-core mailing list
> > Openembedded-core@lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> >
> 
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
Khem Raj - Jan. 28, 2012, 8:11 p.m.
On (27/01/12 08:41), simran singh wrote:
> 
> Hello Raj,
> 
> I am using open embedded provided through a company instead of downloading from the git repository. Is there a way 
> to apply this patch manually without going through git?.
> I tried 'bitbake patch filename' but that did not work.

if you dont use git then just patch -p1 < <patchfilename> from
openembedded-core directory should work.

btw. learn about patch(man patch) it should really help you

> Thanks a bunch for your help.
> 
> Sim  
> 
> > From: raj.khem@gmail.com
> > Date: Wed, 25 Jan 2012 17:49:48 -0800
> > To: openembedded-core@lists.openembedded.org
> > Subject: Re: [OE-core] Net::SSLeay perl extension OpenSSL
> > 
> > On Wed, Jan 25, 2012 at 4:50 PM, simran singh <kyoonn@hotmail.com> wrote:
> > >
> > > Hello Raj,
> > >
> > > Thanks for the reply.
> > > I do not have the file named "libnet-ssleay-license". Where can I obtain
> > > this?
> > > If I try to build without that file, I get the same error about command.pm.
> > 
> > Did you apply the patch properly ?
> > 
> > save the patch and cd into openembedded-core
> > and then git am <patchfile>
> > >
> > >
> > > Date: Wed, 25 Jan 2012 16:36:44 -0800
> > > From: raj.khem@gmail.com
> > > To: openembedded-core@lists.openembedded.org
> > > Subject: Re: [OE-core] Net::SSLeay perl extension OpenSSL
> > >
> > >
> > > On (25/01/12 14:50), simran singh wrote:
> > >>
> > >> Hello,
> > >>
> > >> I am not sure if this is the right list.
> > >>
> > >> Trying to add Net::SSLeay perl module, I get the following error.
> > >>
> > >
> > > Please try attached patch. I have not tested it
> > >
> > >
> > >
> > >>
> > >>
> > >>  NOTE: Running task 204 of 315 (ID: 11,
> > >>
> > >> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/
> > >>
> > >> net-ssleay/net-ssleay_1.36.bb, do_compile)
> > >>
> > >> ERROR: TaskFailed event exception, aborting
> > >>
> > >> ERROR: Build of
> > >>
> > >> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb
> > >>
> > >>  do_compile failed
> > >>
> > >> ERROR: Task 11
> > >>
> > >> (/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb,
> > >>
> > >>  do_compile) failed with 256
> > >>
> > >> ERROR:
> > >>
> > >> '/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb'
> > >>  failed
> > >>
> > >> NOTE: package net-ssleay-1.36-r0: task do_compile: Started
> > >>
> > >> ERROR: Function do_compile failed
> > >>
> > >> NOTE: Task failed: ('function do_compile failed',
> > >>
> > >> '/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/work/
> > >>
> > >> ppce500mc-linux/net-ssleay-1.36-r0/temp/log.do_compile.22680')
> > >>
> > >> ERROR: Logfile of failure stored in:
> > >>
> > >> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/work/ppce500mc-
> > >>
> > >> linux/net-ssleay-1.36-r0/temp/log.do_compile.22680
> > >>
> > >> Log data follows:
> > >>
> > >> | NOTE: make -j 2 -e MAKEFLAGS= PASTHRU_INC= -fexpensive-optimizations
> > >> -frename-registers -fomit-frame-pointer -O2 -g0 CCFLAGS= -fexpensive
> > >>
> > >> -optimizations -frename-registers -fomit-frame-pointer -O2 -g0
> > >> LD=powerpc-linux-gnu-gcc -mcpu=e500mc -maix-struct-return
> > >> --sysroot=/home/Simran/
> > >>
> > >>
> > >> Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/sysroots/ppce500mc-linux
> > >>
> > >> | Can't locate ExtUtils/Command.pm in @INC (@INC contains: inc
> > >>
> > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release
> > >>
> > >> /sysroots/i686-linux/usr/lib/perl/5.10.1
> > >>
> > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib
> > >>
> > >> /perl/5.10.1
> > >>
> > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl/5.10.1
> > >>
> > >>  /home/
> > >>
> > >>
> > >> jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl
> > >> .).
> > >>
> > >> | BEGIN failed--compilation aborted.
> > >>
> > >> | make: *** [blib/lib/Net/.exists] Error 2
> > >>
> > >> | make: *** Waiting for unfinished jobs....
> > >>
> > >> | Can't locate ExtUtils/Command.pm in @INC (@INC contains: inc
> > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/
> > >>
> > >> build_p1023rds_release/sysroots/i686-linux/usr/lib/perl/5.10.1
> > >>
> > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release
> > >>
> > >> /sysroots/i686-linux/usr/lib/perl/5.10.1
> > >>
> > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr
> > >>
> > >> /lib/perl/5.10.1
> > >>
> > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl
> > >>  .).
> > >>
> > >> | BEGIN failed--compilation aborted.
> > >>
> > >> | make: *** [blib/arch/.exists] Error 2
> > >>
> > >> | FATAL: oe_runmake failed
> > >>
> > >> | ERROR: Function do_compile failed
> > >>
> > >> NOTE: package net-ssleay-1.36-r0: task do_compile: Failed
> > >>
> > >> ERROR: TaskFailed event exception, aborting
> > >>
> > >>
> > >>
> > >>
> > >>
> > >> I used the libnet-ssleay-perl_1.36.bb, I found in the oe-commit archive.
> > >>
> > >> Please advice and thanks.
> > >>
> > >>
> > >>
> > >> Sim Gill 		 	   		   		 	   		
> > >
> > >
> > >> _______________________________________________
> > >> Openembedded-core mailing list
> > >> Openembedded-core@lists.openembedded.org
> > >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> > >
> > >
> > > --
> > > -Khem
> > >
> > >
> > > _______________________________________________ Openembedded-core mailing
> > > list Openembedded-core@lists.openembedded.org
> > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> > >
> > > _______________________________________________
> > > Openembedded-core mailing list
> > > Openembedded-core@lists.openembedded.org
> > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> > >
> > 
> > _______________________________________________
> > Openembedded-core mailing list
> > Openembedded-core@lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>  		 	   		  

> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
simran singh - Jan. 30, 2012, 8:22 p.m.
Hello,
I was able to successfully add the patch to the core. Thanks to your instructions. Even though a recipe was created, It is not being built with either perl or openssl. Do I need to add a dependency somewhere for the libnet-ssleay recipe to be recognized?Thanks.

> Date: Sat, 28 Jan 2012 12:11:45 -0800
> From: raj.khem@gmail.com
> To: openembedded-core@lists.openembedded.org
> Subject: Re: [OE-core] Net::SSLeay perl extension OpenSSL
> 
> On (27/01/12 08:41), simran singh wrote:
> > 
> > Hello Raj,
> > 
> > I am using open embedded provided through a company instead of downloading from the git repository. Is there a way 
> > to apply this patch manually without going through git?.
> > I tried 'bitbake patch filename' but that did not work.
> 
> if you dont use git then just patch -p1 < <patchfilename> from
> openembedded-core directory should work.
> 
> btw. learn about patch(man patch) it should really help you
> 
> > Thanks a bunch for your help.
> > 
> > Sim  
> > 
> > > From: raj.khem@gmail.com
> > > Date: Wed, 25 Jan 2012 17:49:48 -0800
> > > To: openembedded-core@lists.openembedded.org
> > > Subject: Re: [OE-core] Net::SSLeay perl extension OpenSSL
> > > 
> > > On Wed, Jan 25, 2012 at 4:50 PM, simran singh <kyoonn@hotmail.com> wrote:
> > > >
> > > > Hello Raj,
> > > >
> > > > Thanks for the reply.
> > > > I do not have the file named "libnet-ssleay-license". Where can I obtain
> > > > this?
> > > > If I try to build without that file, I get the same error about command.pm.
> > > 
> > > Did you apply the patch properly ?
> > > 
> > > save the patch and cd into openembedded-core
> > > and then git am <patchfile>
> > > >
> > > >
> > > > Date: Wed, 25 Jan 2012 16:36:44 -0800
> > > > From: raj.khem@gmail.com
> > > > To: openembedded-core@lists.openembedded.org
> > > > Subject: Re: [OE-core] Net::SSLeay perl extension OpenSSL
> > > >
> > > >
> > > > On (25/01/12 14:50), simran singh wrote:
> > > >>
> > > >> Hello,
> > > >>
> > > >> I am not sure if this is the right list.
> > > >>
> > > >> Trying to add Net::SSLeay perl module, I get the following error.
> > > >>
> > > >
> > > > Please try attached patch. I have not tested it
> > > >
> > > >
> > > >
> > > >>
> > > >>
> > > >>  NOTE: Running task 204 of 315 (ID: 11,
> > > >>
> > > >> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/
> > > >>
> > > >> net-ssleay/net-ssleay_1.36.bb, do_compile)
> > > >>
> > > >> ERROR: TaskFailed event exception, aborting
> > > >>
> > > >> ERROR: Build of
> > > >>
> > > >> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb
> > > >>
> > > >>  do_compile failed
> > > >>
> > > >> ERROR: Task 11
> > > >>
> > > >> (/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb,
> > > >>
> > > >>  do_compile) failed with 256
> > > >>
> > > >> ERROR:
> > > >>
> > > >> '/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb'
> > > >>  failed
> > > >>
> > > >> NOTE: package net-ssleay-1.36-r0: task do_compile: Started
> > > >>
> > > >> ERROR: Function do_compile failed
> > > >>
> > > >> NOTE: Task failed: ('function do_compile failed',
> > > >>
> > > >> '/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/work/
> > > >>
> > > >> ppce500mc-linux/net-ssleay-1.36-r0/temp/log.do_compile.22680')
> > > >>
> > > >> ERROR: Logfile of failure stored in:
> > > >>
> > > >> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/work/ppce500mc-
> > > >>
> > > >> linux/net-ssleay-1.36-r0/temp/log.do_compile.22680
> > > >>
> > > >> Log data follows:
> > > >>
> > > >> | NOTE: make -j 2 -e MAKEFLAGS= PASTHRU_INC= -fexpensive-optimizations
> > > >> -frename-registers -fomit-frame-pointer -O2 -g0 CCFLAGS= -fexpensive
> > > >>
> > > >> -optimizations -frename-registers -fomit-frame-pointer -O2 -g0
> > > >> LD=powerpc-linux-gnu-gcc -mcpu=e500mc -maix-struct-return
> > > >> --sysroot=/home/Simran/
> > > >>
> > > >>
> > > >> Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/sysroots/ppce500mc-linux
> > > >>
> > > >> | Can't locate ExtUtils/Command.pm in @INC (@INC contains: inc
> > > >>
> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release
> > > >>
> > > >> /sysroots/i686-linux/usr/lib/perl/5.10.1
> > > >>
> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib
> > > >>
> > > >> /perl/5.10.1
> > > >>
> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl/5.10.1
> > > >>
> > > >>  /home/
> > > >>
> > > >>
> > > >> jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl
> > > >> .).
> > > >>
> > > >> | BEGIN failed--compilation aborted.
> > > >>
> > > >> | make: *** [blib/lib/Net/.exists] Error 2
> > > >>
> > > >> | make: *** Waiting for unfinished jobs....
> > > >>
> > > >> | Can't locate ExtUtils/Command.pm in @INC (@INC contains: inc
> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/
> > > >>
> > > >> build_p1023rds_release/sysroots/i686-linux/usr/lib/perl/5.10.1
> > > >>
> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release
> > > >>
> > > >> /sysroots/i686-linux/usr/lib/perl/5.10.1
> > > >>
> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr
> > > >>
> > > >> /lib/perl/5.10.1
> > > >>
> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl
> > > >>  .).
> > > >>
> > > >> | BEGIN failed--compilation aborted.
> > > >>
> > > >> | make: *** [blib/arch/.exists] Error 2
> > > >>
> > > >> | FATAL: oe_runmake failed
> > > >>
> > > >> | ERROR: Function do_compile failed
> > > >>
> > > >> NOTE: package net-ssleay-1.36-r0: task do_compile: Failed
> > > >>
> > > >> ERROR: TaskFailed event exception, aborting
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >> I used the libnet-ssleay-perl_1.36.bb, I found in the oe-commit archive.
> > > >>
> > > >> Please advice and thanks.
> > > >>
> > > >>
> > > >>
> > > >> Sim Gill 		 	   		   		 	   		
> > > >
> > > >
> > > >> _______________________________________________
> > > >> Openembedded-core mailing list
> > > >> Openembedded-core@lists.openembedded.org
> > > >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> > > >
> > > >
> > > > --
> > > > -Khem
> > > >
> > > >
> > > > _______________________________________________ Openembedded-core mailing
> > > > list Openembedded-core@lists.openembedded.org
> > > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> > > >
> > > > _______________________________________________
> > > > Openembedded-core mailing list
> > > > Openembedded-core@lists.openembedded.org
> > > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> > > >
> > > 
> > > _______________________________________________
> > > Openembedded-core mailing list
> > > Openembedded-core@lists.openembedded.org
> > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> >  		 	   		  
> 
> > _______________________________________________
> > Openembedded-core mailing list
> > Openembedded-core@lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> 
> 
> -- 
> -Khem
> 
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
Khem Raj - Jan. 30, 2012, 8:30 p.m.
On Mon, Jan 30, 2012 at 12:22 PM, simran singh <kyoonn@hotmail.com> wrote:
> Hello,
>
> I was able to successfully add the patch to the core. Thanks to your
> instructions.
> Even though a recipe was created, It is not being built with either perl or
> openssl.
> Do I need to add a dependency somewhere for the libnet-ssleay recipe to be
> recognized?

it needs to get to the image either via some RDEPENDS or IMAGE_INSTALL
variable. You can try to add it through
your local.conf by adding


IMAGE_INSTALL_append_pn-<your_image_name_here> = " libnet-ssleay"


> Thanks.
>
>
>> Date: Sat, 28 Jan 2012 12:11:45 -0800
>
>> From: raj.khem@gmail.com
>> To: openembedded-core@lists.openembedded.org
>> Subject: Re: [OE-core] Net::SSLeay perl extension OpenSSL
>>
>> On (27/01/12 08:41), simran singh wrote:
>> >
>> > Hello Raj,
>> >
>> > I am using open embedded provided through a company instead of
>> > downloading from the git repository. Is there a way
>> > to apply this patch manually without going through git?.
>> > I tried 'bitbake patch filename' but that did not work.
>>
>> if you dont use git then just patch -p1 < <patchfilename> from
>> openembedded-core directory should work.
>>
>> btw. learn about patch(man patch) it should really help you
>>
>> > Thanks a bunch for your help.
>> >
>> > Sim
>> >
>> > > From: raj.khem@gmail.com
>> > > Date: Wed, 25 Jan 2012 17:49:48 -0800
>> > > To: openembedded-core@lists.openembedded.org
>> > > Subject: Re: [OE-core] Net::SSLeay perl extension OpenSSL
>> > >
>> > > On Wed, Jan 25, 2012 at 4:50 PM, simran singh <kyoonn@hotmail.com>
>> > > wrote:
>> > > >
>> > > > Hello Raj,
>> > > >
>> > > > Thanks for the reply.
>> > > > I do not have the file named "libnet-ssleay-license". Where can I
>> > > > obtain
>> > > > this?
>> > > > If I try to build without that file, I get the same error about
>> > > > command.pm.
>> > >
>> > > Did you apply the patch properly ?
>> > >
>> > > save the patch and cd into openembedded-core
>> > > and then git am <patchfile>
>> > > >
>> > > >
>> > > > Date: Wed, 25 Jan 2012 16:36:44 -0800
>> > > > From: raj.khem@gmail.com
>> > > > To: openembedded-core@lists.openembedded.org
>> > > > Subject: Re: [OE-core] Net::SSLeay perl extension OpenSSL
>> > > >
>> > > >
>> > > > On (25/01/12 14:50), simran singh wrote:
>> > > >>
>> > > >> Hello,
>> > > >>
>> > > >> I am not sure if this is the right list.
>> > > >>
>> > > >> Trying to add Net::SSLeay perl module, I get the following error.
>> > > >>
>> > > >
>> > > > Please try attached patch. I have not tested it
>> > > >
>> > > >
>> > > >
>> > > >>
>> > > >>
>> > > >> NOTE: Running task 204 of 315 (ID: 11,
>> > > >>
>> > > >>
>> > > >> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/
>> > > >>
>> > > >> net-ssleay/net-ssleay_1.36.bb, do_compile)
>> > > >>
>> > > >> ERROR: TaskFailed event exception, aborting
>> > > >>
>> > > >> ERROR: Build of
>> > > >>
>> > > >>
>> > > >> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb
>> > > >>
>> > > >> do_compile failed
>> > > >>
>> > > >> ERROR: Task 11
>> > > >>
>> > > >>
>> > > >> (/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb,
>> > > >>
>> > > >> do_compile) failed with 256
>> > > >>
>> > > >> ERROR:
>> > > >>
>> > > >>
>> > > >> '/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb'
>> > > >> failed
>> > > >>
>> > > >> NOTE: package net-ssleay-1.36-r0: task do_compile: Started
>> > > >>
>> > > >> ERROR: Function do_compile failed
>> > > >>
>> > > >> NOTE: Task failed: ('function do_compile failed',
>> > > >>
>> > > >>
>> > > >> '/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/work/
>> > > >>
>> > > >> ppce500mc-linux/net-ssleay-1.36-r0/temp/log.do_compile.22680')
>> > > >>
>> > > >> ERROR: Logfile of failure stored in:
>> > > >>
>> > > >>
>> > > >> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/work/ppce500mc-
>> > > >>
>> > > >> linux/net-ssleay-1.36-r0/temp/log.do_compile.22680
>> > > >>
>> > > >> Log data follows:
>> > > >>
>> > > >> | NOTE: make -j 2 -e MAKEFLAGS= PASTHRU_INC=
>> > > >> -fexpensive-optimizations
>> > > >> -frename-registers -fomit-frame-pointer -O2 -g0 CCFLAGS=
>> > > >> -fexpensive
>> > > >>
>> > > >> -optimizations -frename-registers -fomit-frame-pointer -O2 -g0
>> > > >> LD=powerpc-linux-gnu-gcc -mcpu=e500mc -maix-struct-return
>> > > >> --sysroot=/home/Simran/
>> > > >>
>> > > >>
>> > > >>
>> > > >> Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/sysroots/ppce500mc-linux
>> > > >>
>> > > >> | Can't locate ExtUtils/Command.pm in @INC (@INC contains: inc
>> > > >>
>> > > >>
>> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release
>> > > >>
>> > > >> /sysroots/i686-linux/usr/lib/perl/5.10.1
>> > > >>
>> > > >>
>> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib
>> > > >>
>> > > >> /perl/5.10.1
>> > > >>
>> > > >>
>> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl/5.10.1
>> > > >>
>> > > >> /home/
>> > > >>
>> > > >>
>> > > >>
>> > > >> jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl
>> > > >> .).
>> > > >>
>> > > >> | BEGIN failed--compilation aborted.
>> > > >>
>> > > >> | make: *** [blib/lib/Net/.exists] Error 2
>> > > >>
>> > > >> | make: *** Waiting for unfinished jobs....
>> > > >>
>> > > >> | Can't locate ExtUtils/Command.pm in @INC (@INC contains: inc
>> > > >>
>> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/
>> > > >>
>> > > >> build_p1023rds_release/sysroots/i686-linux/usr/lib/perl/5.10.1
>> > > >>
>> > > >>
>> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release
>> > > >>
>> > > >> /sysroots/i686-linux/usr/lib/perl/5.10.1
>> > > >>
>> > > >>
>> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr
>> > > >>
>> > > >> /lib/perl/5.10.1
>> > > >>
>> > > >>
>> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl
>> > > >> .).
>> > > >>
>> > > >> | BEGIN failed--compilation aborted.
>> > > >>
>> > > >> | make: *** [blib/arch/.exists] Error 2
>> > > >>
>> > > >> | FATAL: oe_runmake failed
>> > > >>
>> > > >> | ERROR: Function do_compile failed
>> > > >>
>> > > >> NOTE: package net-ssleay-1.36-r0: task do_compile: Failed
>> > > >>
>> > > >> ERROR: TaskFailed event exception, aborting
>> > > >>
>> > > >>
>> > > >>
>> > > >>
>> > > >>
>> > > >> I used the libnet-ssleay-perl_1.36.bb, I found in the oe-commit
>> > > >> archive.
>> > > >>
>> > > >> Please advice and thanks.
>> > > >>
>> > > >>
>> > > >>
>> > > >> Sim Gill
>> > > >
>> > > >
>> > > >> _______________________________________________
>> > > >> Openembedded-core mailing list
>> > > >> Openembedded-core@lists.openembedded.org
>> > > >>
>> > > >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>> > > >
>> > > >
>> > > > --
>> > > > -Khem
>> > > >
>> > > >
>> > > > _______________________________________________ Openembedded-core
>> > > > mailing
>> > > > list Openembedded-core@lists.openembedded.org
>> > > >
>> > > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>> > > >
>> > > > _______________________________________________
>> > > > Openembedded-core mailing list
>> > > > Openembedded-core@lists.openembedded.org
>> > > >
>> > > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>> > > >
>> > >
>> > > _______________________________________________
>> > > Openembedded-core mailing list
>> > > Openembedded-core@lists.openembedded.org
>> > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>> >
>>
>> > _______________________________________________
>> > Openembedded-core mailing list
>> > Openembedded-core@lists.openembedded.org
>> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>>
>>
>> --
>> -Khem
>>
>> _______________________________________________
>> Openembedded-core mailing list
>> Openembedded-core@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
simran singh - Jan. 30, 2012, 9:30 p.m.
Hello Raj,
I am getting the exact same error as before. Any ideas. I did
IMAGE_INSTALL_append_pn-devel-image = "libnet-ssleay-perl" 

#bitbake devel-image
Gets stuck at the same Cant' locate ExtUtils.
Thanks for your help so far.



> From: raj.khem@gmail.com
> Date: Mon, 30 Jan 2012 12:30:27 -0800
> To: openembedded-core@lists.openembedded.org
> Subject: Re: [OE-core] Net::SSLeay perl extension OpenSSL
> 
> On Mon, Jan 30, 2012 at 12:22 PM, simran singh <kyoonn@hotmail.com> wrote:
> > Hello,
> >
> > I was able to successfully add the patch to the core. Thanks to your
> > instructions.
> > Even though a recipe was created, It is not being built with either perl or
> > openssl.
> > Do I need to add a dependency somewhere for the libnet-ssleay recipe to be
> > recognized?
> 
> it needs to get to the image either via some RDEPENDS or IMAGE_INSTALL
> variable. You can try to add it through
> your local.conf by adding
> 
> 
> IMAGE_INSTALL_append_pn-<your_image_name_here> = " libnet-ssleay"
> 
> 
> > Thanks.
> >
> >
> >> Date: Sat, 28 Jan 2012 12:11:45 -0800
> >
> >> From: raj.khem@gmail.com
> >> To: openembedded-core@lists.openembedded.org
> >> Subject: Re: [OE-core] Net::SSLeay perl extension OpenSSL
> >>
> >> On (27/01/12 08:41), simran singh wrote:
> >> >
> >> > Hello Raj,
> >> >
> >> > I am using open embedded provided through a company instead of
> >> > downloading from the git repository. Is there a way
> >> > to apply this patch manually without going through git?.
> >> > I tried 'bitbake patch filename' but that did not work.
> >>
> >> if you dont use git then just patch -p1 < <patchfilename> from
> >> openembedded-core directory should work.
> >>
> >> btw. learn about patch(man patch) it should really help you
> >>
> >> > Thanks a bunch for your help.
> >> >
> >> > Sim
> >> >
> >> > > From: raj.khem@gmail.com
> >> > > Date: Wed, 25 Jan 2012 17:49:48 -0800
> >> > > To: openembedded-core@lists.openembedded.org
> >> > > Subject: Re: [OE-core] Net::SSLeay perl extension OpenSSL
> >> > >
> >> > > On Wed, Jan 25, 2012 at 4:50 PM, simran singh <kyoonn@hotmail.com>
> >> > > wrote:
> >> > > >
> >> > > > Hello Raj,
> >> > > >
> >> > > > Thanks for the reply.
> >> > > > I do not have the file named "libnet-ssleay-license". Where can I
> >> > > > obtain
> >> > > > this?
> >> > > > If I try to build without that file, I get the same error about
> >> > > > command.pm.
> >> > >
> >> > > Did you apply the patch properly ?
> >> > >
> >> > > save the patch and cd into openembedded-core
> >> > > and then git am <patchfile>
> >> > > >
> >> > > >
> >> > > > Date: Wed, 25 Jan 2012 16:36:44 -0800
> >> > > > From: raj.khem@gmail.com
> >> > > > To: openembedded-core@lists.openembedded.org
> >> > > > Subject: Re: [OE-core] Net::SSLeay perl extension OpenSSL
> >> > > >
> >> > > >
> >> > > > On (25/01/12 14:50), simran singh wrote:
> >> > > >>
> >> > > >> Hello,
> >> > > >>
> >> > > >> I am not sure if this is the right list.
> >> > > >>
> >> > > >> Trying to add Net::SSLeay perl module, I get the following error.
> >> > > >>
> >> > > >
> >> > > > Please try attached patch. I have not tested it
> >> > > >
> >> > > >
> >> > > >
> >> > > >>
> >> > > >>
> >> > > >> NOTE: Running task 204 of 315 (ID: 11,
> >> > > >>
> >> > > >>
> >> > > >> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/
> >> > > >>
> >> > > >> net-ssleay/net-ssleay_1.36.bb, do_compile)
> >> > > >>
> >> > > >> ERROR: TaskFailed event exception, aborting
> >> > > >>
> >> > > >> ERROR: Build of
> >> > > >>
> >> > > >>
> >> > > >> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb
> >> > > >>
> >> > > >> do_compile failed
> >> > > >>
> >> > > >> ERROR: Task 11
> >> > > >>
> >> > > >>
> >> > > >> (/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb,
> >> > > >>
> >> > > >> do_compile) failed with 256
> >> > > >>
> >> > > >> ERROR:
> >> > > >>
> >> > > >>
> >> > > >> '/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb'
> >> > > >> failed
> >> > > >>
> >> > > >> NOTE: package net-ssleay-1.36-r0: task do_compile: Started
> >> > > >>
> >> > > >> ERROR: Function do_compile failed
> >> > > >>
> >> > > >> NOTE: Task failed: ('function do_compile failed',
> >> > > >>
> >> > > >>
> >> > > >> '/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/work/
> >> > > >>
> >> > > >> ppce500mc-linux/net-ssleay-1.36-r0/temp/log.do_compile.22680')
> >> > > >>
> >> > > >> ERROR: Logfile of failure stored in:
> >> > > >>
> >> > > >>
> >> > > >> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/work/ppce500mc-
> >> > > >>
> >> > > >> linux/net-ssleay-1.36-r0/temp/log.do_compile.22680
> >> > > >>
> >> > > >> Log data follows:
> >> > > >>
> >> > > >> | NOTE: make -j 2 -e MAKEFLAGS= PASTHRU_INC=
> >> > > >> -fexpensive-optimizations
> >> > > >> -frename-registers -fomit-frame-pointer -O2 -g0 CCFLAGS=
> >> > > >> -fexpensive
> >> > > >>
> >> > > >> -optimizations -frename-registers -fomit-frame-pointer -O2 -g0
> >> > > >> LD=powerpc-linux-gnu-gcc -mcpu=e500mc -maix-struct-return
> >> > > >> --sysroot=/home/Simran/
> >> > > >>
> >> > > >>
> >> > > >>
> >> > > >> Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/sysroots/ppce500mc-linux
> >> > > >>
> >> > > >> | Can't locate ExtUtils/Command.pm in @INC (@INC contains: inc
> >> > > >>
> >> > > >>
> >> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release
> >> > > >>
> >> > > >> /sysroots/i686-linux/usr/lib/perl/5.10.1
> >> > > >>
> >> > > >>
> >> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib
> >> > > >>
> >> > > >> /perl/5.10.1
> >> > > >>
> >> > > >>
> >> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl/5.10.1
> >> > > >>
> >> > > >> /home/
> >> > > >>
> >> > > >>
> >> > > >>
> >> > > >> jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl
> >> > > >> .).
> >> > > >>
> >> > > >> | BEGIN failed--compilation aborted.
> >> > > >>
> >> > > >> | make: *** [blib/lib/Net/.exists] Error 2
> >> > > >>
> >> > > >> | make: *** Waiting for unfinished jobs....
> >> > > >>
> >> > > >> | Can't locate ExtUtils/Command.pm in @INC (@INC contains: inc
> >> > > >>
> >> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/
> >> > > >>
> >> > > >> build_p1023rds_release/sysroots/i686-linux/usr/lib/perl/5.10.1
> >> > > >>
> >> > > >>
> >> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release
> >> > > >>
> >> > > >> /sysroots/i686-linux/usr/lib/perl/5.10.1
> >> > > >>
> >> > > >>
> >> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr
> >> > > >>
> >> > > >> /lib/perl/5.10.1
> >> > > >>
> >> > > >>
> >> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl
> >> > > >> .).
> >> > > >>
> >> > > >> | BEGIN failed--compilation aborted.
> >> > > >>
> >> > > >> | make: *** [blib/arch/.exists] Error 2
> >> > > >>
> >> > > >> | FATAL: oe_runmake failed
> >> > > >>
> >> > > >> | ERROR: Function do_compile failed
> >> > > >>
> >> > > >> NOTE: package net-ssleay-1.36-r0: task do_compile: Failed
> >> > > >>
> >> > > >> ERROR: TaskFailed event exception, aborting
> >> > > >>
> >> > > >>
> >> > > >>
> >> > > >>
> >> > > >>
> >> > > >> I used the libnet-ssleay-perl_1.36.bb, I found in the oe-commit
> >> > > >> archive.
> >> > > >>
> >> > > >> Please advice and thanks.
> >> > > >>
> >> > > >>
> >> > > >>
> >> > > >> Sim Gill
> >> > > >
> >> > > >
> >> > > >> _______________________________________________
> >> > > >> Openembedded-core mailing list
> >> > > >> Openembedded-core@lists.openembedded.org
> >> > > >>
> >> > > >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> >> > > >
> >> > > >
> >> > > > --
> >> > > > -Khem
> >> > > >
> >> > > >
> >> > > > _______________________________________________ Openembedded-core
> >> > > > mailing
> >> > > > list Openembedded-core@lists.openembedded.org
> >> > > >
> >> > > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> >> > > >
> >> > > > _______________________________________________
> >> > > > Openembedded-core mailing list
> >> > > > Openembedded-core@lists.openembedded.org
> >> > > >
> >> > > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> >> > > >
> >> > >
> >> > > _______________________________________________
> >> > > Openembedded-core mailing list
> >> > > Openembedded-core@lists.openembedded.org
> >> > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> >> >
> >>
> >> > _______________________________________________
> >> > Openembedded-core mailing list
> >> > Openembedded-core@lists.openembedded.org
> >> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> >>
> >>
> >> --
> >> -Khem
> >>
> >> _______________________________________________
> >> Openembedded-core mailing list
> >> Openembedded-core@lists.openembedded.org
> >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> >
> > _______________________________________________
> > Openembedded-core mailing list
> > Openembedded-core@lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> >
> 
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
Khem Raj - Jan. 30, 2012, 11:32 p.m.
On Mon, Jan 30, 2012 at 1:30 PM, simran singh <kyoonn@hotmail.com> wrote:
> Hello Raj,
>
> I am getting the exact same error as before. Any ideas. I did
>
> IMAGE_INSTALL_append_pn-devel-image = "libnet-ssleay-perl"
>
> #bitbake devel-image
>
> Gets stuck at the same Cant' locate ExtUtils.

thats another perl module. I guess your perl is not
building this module. So either enable perl to do it
or create a new recipe to build it like libnet-ssleay-perl
>
> Thanks for your help so far.
>
>
>
>
>> From: raj.khem@gmail.com
>> Date: Mon, 30 Jan 2012 12:30:27 -0800
>
>> To: openembedded-core@lists.openembedded.org
>> Subject: Re: [OE-core] Net::SSLeay perl extension OpenSSL
>>
>> On Mon, Jan 30, 2012 at 12:22 PM, simran singh <kyoonn@hotmail.com> wrote:
>> > Hello,
>> >
>> > I was able to successfully add the patch to the core. Thanks to your
>> > instructions.
>> > Even though a recipe was created, It is not being built with either perl
>> > or
>> > openssl.
>> > Do I need to add a dependency somewhere for the libnet-ssleay recipe to
>> > be
>> > recognized?
>>
>> it needs to get to the image either via some RDEPENDS or IMAGE_INSTALL
>> variable. You can try to add it through
>> your local.conf by adding
>>
>>
>> IMAGE_INSTALL_append_pn-<your_image_name_here> = " libnet-ssleay"
>>
>>
>> > Thanks.
>> >
>> >
>> >> Date: Sat, 28 Jan 2012 12:11:45 -0800
>> >
>> >> From: raj.khem@gmail.com
>> >> To: openembedded-core@lists.openembedded.org
>> >> Subject: Re: [OE-core] Net::SSLeay perl extension OpenSSL
>> >>
>> >> On (27/01/12 08:41), simran singh wrote:
>> >> >
>> >> > Hello Raj,
>> >> >
>> >> > I am using open embedded provided through a company instead of
>> >> > downloading from the git repository. Is there a way
>> >> > to apply this patch manually without going through git?.
>> >> > I tried 'bitbake patch filename' but that did not work.
>> >>
>> >> if you dont use git then just patch -p1 < <patchfilename> from
>> >> openembedded-core directory should work.
>> >>
>> >> btw. learn about patch(man patch) it should really help you
>> >>
>> >> > Thanks a bunch for your help.
>> >> >
>> >> > Sim
>> >> >
>> >> > > From: raj.khem@gmail.com
>> >> > > Date: Wed, 25 Jan 2012 17:49:48 -0800
>> >> > > To: openembedded-core@lists.openembedded.org
>> >> > > Subject: Re: [OE-core] Net::SSLeay perl extension OpenSSL
>> >> > >
>> >> > > On Wed, Jan 25, 2012 at 4:50 PM, simran singh <kyoonn@hotmail.com>
>> >> > > wrote:
>> >> > > >
>> >> > > > Hello Raj,
>> >> > > >
>> >> > > > Thanks for the reply.
>> >> > > > I do not have the file named "libnet-ssleay-license". Where can I
>> >> > > > obtain
>> >> > > > this?
>> >> > > > If I try to build without that file, I get the same error about
>> >> > > > command.pm.
>> >> > >
>> >> > > Did you apply the patch properly ?
>> >> > >
>> >> > > save the patch and cd into openembedded-core
>> >> > > and then git am <patchfile>
>> >> > > >
>> >> > > >
>> >> > > > Date: Wed, 25 Jan 2012 16:36:44 -0800
>> >> > > > From: raj.khem@gmail.com
>> >> > > > To: openembedded-core@lists.openembedded.org
>> >> > > > Subject: Re: [OE-core] Net::SSLeay perl extension OpenSSL
>> >> > > >
>> >> > > >
>> >> > > > On (25/01/12 14:50), simran singh wrote:
>> >> > > >>
>> >> > > >> Hello,
>> >> > > >>
>> >> > > >> I am not sure if this is the right list.
>> >> > > >>
>> >> > > >> Trying to add Net::SSLeay perl module, I get the following
>> >> > > >> error.
>> >> > > >>
>> >> > > >
>> >> > > > Please try attached patch. I have not tested it
>> >> > > >
>> >> > > >
>> >> > > >
>> >> > > >>
>> >> > > >>
>> >> > > >> NOTE: Running task 204 of 315 (ID: 11,
>> >> > > >>
>> >> > > >>
>> >> > > >>
>> >> > > >> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/
>> >> > > >>
>> >> > > >> net-ssleay/net-ssleay_1.36.bb, do_compile)
>> >> > > >>
>> >> > > >> ERROR: TaskFailed event exception, aborting
>> >> > > >>
>> >> > > >> ERROR: Build of
>> >> > > >>
>> >> > > >>
>> >> > > >>
>> >> > > >> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb
>> >> > > >>
>> >> > > >> do_compile failed
>> >> > > >>
>> >> > > >> ERROR: Task 11
>> >> > > >>
>> >> > > >>
>> >> > > >>
>> >> > > >> (/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb,
>> >> > > >>
>> >> > > >> do_compile) failed with 256
>> >> > > >>
>> >> > > >> ERROR:
>> >> > > >>
>> >> > > >>
>> >> > > >>
>> >> > > >> '/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/engage-blackcore-common/recipes/net-ssleay/net-ssleay_1.36.bb'
>> >> > > >> failed
>> >> > > >>
>> >> > > >> NOTE: package net-ssleay-1.36-r0: task do_compile: Started
>> >> > > >>
>> >> > > >> ERROR: Function do_compile failed
>> >> > > >>
>> >> > > >> NOTE: Task failed: ('function do_compile failed',
>> >> > > >>
>> >> > > >>
>> >> > > >>
>> >> > > >> '/home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/work/
>> >> > > >>
>> >> > > >> ppce500mc-linux/net-ssleay-1.36-r0/temp/log.do_compile.22680')
>> >> > > >>
>> >> > > >> ERROR: Logfile of failure stored in:
>> >> > > >>
>> >> > > >>
>> >> > > >>
>> >> > > >> /home/Simran/Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/work/ppce500mc-
>> >> > > >>
>> >> > > >> linux/net-ssleay-1.36-r0/temp/log.do_compile.22680
>> >> > > >>
>> >> > > >> Log data follows:
>> >> > > >>
>> >> > > >> | NOTE: make -j 2 -e MAKEFLAGS= PASTHRU_INC=
>> >> > > >> -fexpensive-optimizations
>> >> > > >> -frename-registers -fomit-frame-pointer -O2 -g0 CCFLAGS=
>> >> > > >> -fexpensive
>> >> > > >>
>> >> > > >> -optimizations -frename-registers -fomit-frame-pointer -O2 -g0
>> >> > > >> LD=powerpc-linux-gnu-gcc -mcpu=e500mc -maix-struct-return
>> >> > > >> --sysroot=/home/Simran/
>> >> > > >>
>> >> > > >>
>> >> > > >>
>> >> > > >>
>> >> > > >> Freescale/QorIQ-DPAA-SDK-20111026-systembuilder/build_p4080ds_release/sysroots/ppce500mc-linux
>> >> > > >>
>> >> > > >> | Can't locate ExtUtils/Command.pm in @INC (@INC contains: inc
>> >> > > >>
>> >> > > >>
>> >> > > >>
>> >> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release
>> >> > > >>
>> >> > > >> /sysroots/i686-linux/usr/lib/perl/5.10.1
>> >> > > >>
>> >> > > >>
>> >> > > >>
>> >> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib
>> >> > > >>
>> >> > > >> /perl/5.10.1
>> >> > > >>
>> >> > > >>
>> >> > > >>
>> >> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl/5.10.1
>> >> > > >>
>> >> > > >> /home/
>> >> > > >>
>> >> > > >>
>> >> > > >>
>> >> > > >>
>> >> > > >> jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl
>> >> > > >> .).
>> >> > > >>
>> >> > > >> | BEGIN failed--compilation aborted.
>> >> > > >>
>> >> > > >> | make: *** [blib/lib/Net/.exists] Error 2
>> >> > > >>
>> >> > > >> | make: *** Waiting for unfinished jobs....
>> >> > > >>
>> >> > > >> | Can't locate ExtUtils/Command.pm in @INC (@INC contains: inc
>> >> > > >>
>> >> > > >>
>> >> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/
>> >> > > >>
>> >> > > >> build_p1023rds_release/sysroots/i686-linux/usr/lib/perl/5.10.1
>> >> > > >>
>> >> > > >>
>> >> > > >>
>> >> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release
>> >> > > >>
>> >> > > >> /sysroots/i686-linux/usr/lib/perl/5.10.1
>> >> > > >>
>> >> > > >>
>> >> > > >>
>> >> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr
>> >> > > >>
>> >> > > >> /lib/perl/5.10.1
>> >> > > >>
>> >> > > >>
>> >> > > >>
>> >> > > >> /home/jenkins/jenkins/jobs/qoriq-dpaa-iso-step1/workspace/sb-dev.git/build_p1023rds_release/sysroots/i686-linux/usr/lib/perl
>> >> > > >> .).
>> >> > > >>
>> >> > > >> | BEGIN failed--compilation aborted.
>> >> > > >>
>> >> > > >> | make: *** [blib/arch/.exists] Error 2
>> >> > > >>
>> >> > > >> | FATAL: oe_runmake failed
>> >> > > >>
>> >> > > >> | ERROR: Function do_compile failed
>> >> > > >>
>> >> > > >> NOTE: package net-ssleay-1.36-r0: task do_compile: Failed
>> >> > > >>
>> >> > > >> ERROR: TaskFailed event exception, aborting
>> >> > > >>
>> >> > > >>
>> >> > > >>
>> >> > > >>
>> >> > > >>
>> >> > > >> I used the libnet-ssleay-perl_1.36.bb, I found in the oe-commit
>> >> > > >> archive.
>> >> > > >>
>> >> > > >> Please advice and thanks.
>> >> > > >>
>> >> > > >>
>> >> > > >>
>> >> > > >> Sim Gill
>> >> > > >
>> >> > > >
>> >> > > >> _______________________________________________
>> >> > > >> Openembedded-core mailing list
>> >> > > >> Openembedded-core@lists.openembedded.org
>> >> > > >>
>> >> > > >>
>> >> > > >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>> >> > > >
>> >> > > >
>> >> > > > --
>> >> > > > -Khem
>> >> > > >
>> >> > > >
>> >> > > > _______________________________________________ Openembedded-core
>> >> > > > mailing
>> >> > > > list Openembedded-core@lists.openembedded.org
>> >> > > >
>> >> > > >
>> >> > > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>> >> > > >
>> >> > > > _______________________________________________
>> >> > > > Openembedded-core mailing list
>> >> > > > Openembedded-core@lists.openembedded.org
>> >> > > >
>> >> > > >
>> >> > > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>> >> > > >
>> >> > >
>> >> > > _______________________________________________
>> >> > > Openembedded-core mailing list
>> >> > > Openembedded-core@lists.openembedded.org
>> >> > >
>> >> > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>> >> >
>> >>
>> >> > _______________________________________________
>> >> > Openembedded-core mailing list
>> >> > Openembedded-core@lists.openembedded.org
>> >> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>> >>
>> >>
>> >> --
>> >> -Khem
>> >>
>> >> _______________________________________________
>> >> Openembedded-core mailing list
>> >> Openembedded-core@lists.openembedded.org
>> >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>> >
>> > _______________________________________________
>> > Openembedded-core mailing list
>> > Openembedded-core@lists.openembedded.org
>> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>> >
>>
>> _______________________________________________
>> Openembedded-core mailing list
>> Openembedded-core@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>

Patch

From 8e8337baa71086cbcf85e5ecddf8ffb23c5785a4 Mon Sep 17 00:00:00 2001
From: Khem Raj <raj.khem@gmail.com>
Date: Wed, 25 Jan 2012 16:33:51 -0800
Subject: [PATCH] libnet-ssleay-perl_1.42: Add recipe

Signed-off-by: Khem Raj <raj.khem@gmail.com>
---
 meta/recipes-extended/perl/libnet-ssleay-license   |  187 ++++++++++++++++++++
 .../perl/libnet-ssleay-perl_1.42.bb                |   33 ++++
 2 files changed, 220 insertions(+), 0 deletions(-)
 create mode 100644 meta/recipes-extended/perl/libnet-ssleay-license
 create mode 100644 meta/recipes-extended/perl/libnet-ssleay-perl_1.42.bb

diff --git a/meta/recipes-extended/perl/libnet-ssleay-license b/meta/recipes-extended/perl/libnet-ssleay-license
new file mode 100644
index 0000000..588fba8
--- /dev/null
+++ b/meta/recipes-extended/perl/libnet-ssleay-license
@@ -0,0 +1,187 @@ 
+Format-Specification: http://svn.debian.org/wsvn/dep/web/deps/dep5.mdwn?op=file&rev=135
+Maintainer: Florian Ragwitz <rafl@debian.org>, Mike McCauley <mikem@open.com.au>
+Source: http://search.cpan.org/dist/Net-SSLeay/
+Name: Net-SSLeay
+
+Files: *
+Copyright: 1996-2003, Sampo Kellomaki <sampo@iki.fi>
+ 2005-2006, Florian Ragwitz <rafl@debian.org>
+ 2005-2006, Mike McCauley <mikem@open.com.au>
+License: OpenSSL
+
+Files: inc/Module/*
+Copyright: 2002-2010, Adam Kennedy <adamk@cpan.org>
+ 2002-2010, Audrey Tang <autrijus@autrijus.org>
+ 2002-2010, Brian Ingerson <ingy@cpan.org>
+License: Artistic or GPL-1+
+
+Files: debian/*
+Copyright: 1999-2001, Gergely Madarasz <gorgo@caesar.elte.hu>
+ 2001, Remi Lefebvre <remi@debian.org>
+ 2001-2004, Stephen Zander <gibreel@debian.org>
+ 2002, Brendan O'Dea <bod@debian.org>
+ 2005, Steve Kemp <skx@debian.org>
+ 2005-2006, Florian Ragwitz <rafl@debian.org>
+ 2008, Niko Tyni <ntyni@debian.org>
+ 2008, Damyan Ivanov <dmn@debian.org>
+ 2008-2011, gregor herrmann <gregoa@debian.org>
+ 2010, Franck Joncourt <franck@debian.org>
+License: Artistic or GPL-1+
+
+License: OpenSSL
+ Distribution and use of this module is under the same terms as the
+ OpenSSL package itself (i.e. free, but mandatory attribution; NO
+ WARRANTY). Please consult LICENSE file in the root of the OpenSSL
+ distribution.
+ .
+ While the source distribution of this perl module does not contain
+ Eric's or OpenSSL's code, if you use this module you will use OpenSSL
+ library. Please give Eric and OpenSSL team credit (as required by
+ their licenses).
+ .
+ And remember, you, and nobody else but you, are responsible for
+ auditing this module and OpenSSL library for security problems,
+ backdoors, and general suitability for your application.
+ .
+ LICENSE ISSUES
+ ==============
+ .
+ The OpenSSL toolkit stays under a dual license, i.e. both the conditions of
+ the OpenSSL License and the original SSLeay license apply to the toolkit.
+ See below for the actual license texts. Actually both licenses are BSD-style
+ Open Source licenses. In case of any license issues related to OpenSSL
+ please contact openssl-core@openssl.org.
+ .
+ OpenSSL License
+ ---------------
+ .
+ /* ====================================================================
+  * Copyright (c) 1998-1999 The OpenSSL Project.  All rights reserved.
+  *
+  * Redistribution and use in source and binary forms, with or without
+  * modification, are permitted provided that the following conditions
+  * are met:
+  *
+  * 1. Redistributions of source code must retain the above copyright
+  *    notice, this list of conditions and the following disclaimer. 
+  *
+  * 2. Redistributions in binary form must reproduce the above copyright
+  *    notice, this list of conditions and the following disclaimer in
+  *    the documentation and/or other materials provided with the
+  *    distribution.
+  *
+  * 3. All advertising materials mentioning features or use of this
+  *    software must display the following acknowledgment:
+  *    "This product includes software developed by the OpenSSL Project
+  *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+  *
+  * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+  *    endorse or promote products derived from this software without
+  *    prior written permission. For written permission, please contact
+  *    openssl-core@openssl.org.
+  *
+  * 5. Products derived from this software may not be called "OpenSSL"
+  *    nor may "OpenSSL" appear in their names without prior written
+  *    permission of the OpenSSL Project.
+  *
+  * 6. Redistributions of any form whatsoever must retain the following
+  *    acknowledgment:
+  *    "This product includes software developed by the OpenSSL Project
+  *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+  * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+  * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+  * OF THE POSSIBILITY OF SUCH DAMAGE.
+  * ====================================================================
+  *
+  * This product includes cryptographic software written by Eric Young
+  * (eay@cryptsoft.com).  This product includes software written by Tim
+  * Hudson (tjh@cryptsoft.com).
+  *
+  */
+ .
+ Original SSLeay License
+ -----------------------
+ .
+ /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+  * All rights reserved.
+  *
+  * This package is an SSL implementation written
+  * by Eric Young (eay@cryptsoft.com).
+  * The implementation was written so as to conform with Netscapes SSL.
+  * 
+  * This library is free for commercial and non-commercial use as long as
+  * the following conditions are aheared to.  The following conditions
+  * apply to all code found in this distribution, be it the RC4, RSA,
+  * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+  * included with this distribution is covered by the same copyright terms
+  * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+  * 
+  * Copyright remains Eric Young's, and as such any Copyright notices in
+  * the code are not to be removed.
+  * If this package is used in a product, Eric Young should be given attribution
+  * as the author of the parts of the library used.
+  * This can be in the form of a textual message at program startup or
+  * in documentation (online or textual) provided with the package.
+  * 
+  * Redistribution and use in source and binary forms, with or without
+  * modification, are permitted provided that the following conditions
+  * are met:
+  * 1. Redistributions of source code must retain the copyright
+  *    notice, this list of conditions and the following disclaimer.
+  * 2. Redistributions in binary form must reproduce the above copyright
+  *    notice, this list of conditions and the following disclaimer in the
+  *    documentation and/or other materials provided with the distribution.
+  * 3. All advertising materials mentioning features or use of this software
+  *    must display the following acknowledgement:
+  *    "This product includes cryptographic software written by
+  *     Eric Young (eay@cryptsoft.com)"
+  *    The word 'cryptographic' can be left out if the rouines from the library
+  *    being used are not cryptographic related :-).
+  * 4. If you include any Windows specific code (or a derivative thereof) from 
+  *    the apps directory (application code) you must include an acknowledgement:
+  *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+  * 
+  * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+  * SUCH DAMAGE.
+  * 
+  * The licence and distribution terms for any publically available version or
+  * derivative of this code cannot be changed.  i.e. this code cannot simply be
+  * copied and put under another distribution licence
+  * [including the GNU Public Licence.]
+  */
+
+License: Artistic
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the Artistic License, which comes with Perl.
+ .
+ On Debian systems, the complete text of the Artistic License
+ can be found in `/usr/share/common-licenses/Artistic'.
+
+License: GPL-1+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 1, or (at your option)
+ any later version.
+ .
+ On Debian systems, the complete text of version 1 of the GNU General
+ Public License can be found in `/usr/share/common-licenses/GPL-1'.
+
diff --git a/meta/recipes-extended/perl/libnet-ssleay-perl_1.42.bb b/meta/recipes-extended/perl/libnet-ssleay-perl_1.42.bb
new file mode 100644
index 0000000..3a75de2
--- /dev/null
+++ b/meta/recipes-extended/perl/libnet-ssleay-perl_1.42.bb
@@ -0,0 +1,33 @@ 
+DESCRIPTION = "Net::SSLeay - Perl extension for using OpenSSL"
+SECTION = "libs"
+LICENSE = "OpenSSL"
+DEPENDS = "openssl zlib"
+RDEPENDS_${PN} += " \
+	perl-module-carp \
+	perl-module-errno \
+	perl-module-extutils-makemaker \
+	perl-module-mime-base64 \
+	perl-module-socket \
+	"
+
+BBCLASSEXTEND = "native"
+PR = "r1"
+LIC_FILES_CHKSUM = "file://libnet-ssleay-license;md5=d9af28e1564d74d6834e9642404639b6"
+
+SRC_URI = "http://search.cpan.org/CPAN/authors/id/M/MI/MIKEM/Net-SSLeay-${PV}.tar.gz;name=net-ssleay-${PV} \
+           file://libnet-ssleay-license \
+          "
+
+SRC_URI[net-ssleay-1.42.md5sum] = "3f9c9589495301c14bfc03097388ca4f"
+SRC_URI[net-ssleay-1.42.sha256sum] = "b6ca7719cd8568e60204f39027c1c68d19fa690b1f3fd380ed14031a1a70fd9d"
+
+S = "${WORKDIR}/Net-SSLeay-${PV}"
+
+export OPENSSL_PREFIX="${STAGING_INCDIR}/.."
+
+inherit cpan
+
+do_configure_prepend () {
+	cp -a ${WORKDIR}/libnet-ssleay-license ${S}
+}
+FILES_${PN}-dbg += "${PERLLIBDIRS}/vendor_perl/*/auto/Net/SSLeay/.debug/"
-- 
1.7.8.3